Samsung Canister vacuum Parts — Browse All Models

How to replace the suction motor in your Samsung canister vacuum

• Unplug the power cord to disconnect the electrical supply to the vacuum.
• Pull the release tab on the exhaust filter cover and lift the exhaust filter cover off the vacuum cleaner. Remove the exhaust filter from the housing.
• Pull the plastic release tab on the front of the canister and lift the canopy hood. Remove the hood from the canister.
• Remove the screws that secure the motor cover and remove the cover.
• With the wires still attached, carefully lift the suction motor out of the canister. Remove the foam padding that surrounds the motor. Note the location of the wires and then disconnect them. Remove the motor and set aside for disposal.
• Connect the wires to the new motor. Wrap the foam padding around the motor and then slide the motor into the canister.
• Reinstall the motor cover, insert the screws and tighten firmly. Snap the hood into place on the canister. Reinstall the exhaust filter in the housing at the back of the canister. Snap the exhaust filter cover into place.

Replacing the dust bag in your Samsung canister vacuum cleaner

• Unplug the vacuum cleaner power cord from the electrical outlet.
• Remove the suction hose from the canister.
• Pull the canister hood release up and out. Lift the canister hood.
• Disengage the cardboard tab from the bag mount by pulling the tab out while lifting up on the tab.
• Pull the bag out of the canister.
• Install the new bag's cardboard tab into the bag mount and tuck the new dust bag into the canister.
• Close the canister hood and reinstall the suction hose on the canister.