Kenmore 79094192311 electric range Parts

On the Kenmore electric range model 79094192311, the model number is typically on the rating label around the oven door area, most often on the oven frame behind the storage drawer or on the door frame when you open the oven door. Use the exact model number when ordering parts or checking wiring requirements in the 79094192311 owner's manual.

Where to look on the range

Check these common label locations (in this order):

• Open the oven door and look along the left or right door frame
• Look on the front frame behind the storage drawer (remove the drawer to view)
• Check the lower front frame near the drawer opening
• Look on the back panel of the range (less common, but possible)

What the label looks like

The rating label usually includes more than just the model number.

Label item	What it’s used for
Model number (example: 79094192311)	Matching parts and documentation
Serial number	Identifying production run for service
Electrical rating (volts/amps)	Verifying power supply and installation

Why it matters

We use the model number to match the correct Kenmore parts and diagrams because similar-looking ranges can use different bake elements, control boards, or wiring harnesses.

If you’re ordering parts

Once you find the model number, compare symptoms to common failures and match the part by description.

• Oven not heating evenly: check the frigidaire range oven temperature sensor 316490000
• Bake not heating: inspect the bake element for blisters or breaks
• Surface element not heating: a control switch or radiant element may be involved

Last updated: January 2026

On the Kenmore electric range model 79094192311, the F90 error code points to an oven door lock problem, most often after a self-clean cycle when the control cannot unlock the door. The fix usually involves checking the door lock mechanism, wiring, and related control components.

What to do first (safe, quick checks)

• Press Cancel/Off to stop the cycle and clear the display.
• Let the range cool for 60 minutes; the lock can stay engaged until the oven is below a safe temperature.
• Try a power reset: turn the range breaker OFF for 5 minutes, then turn it back ON.
• If the door is still locked, avoid forcing it; forcing can bend the latch or damage the door liner.
• Review the self-clean and error code guidance in the 79094192311 owner's manual.

Common causes of an F90 code

In this Kenmore 790-series design, F90 typically shows up when the control does not see the door lock switch change states as expected.

• Door lock motor not moving the latch smoothly
• Door lock switch not opening or closing reliably
• Loose or damaged wiring between the lock assembly and control
• Electronic oven control not interpreting the lock feedback correctly

Parts that are often involved

Symptom	Most likely area	Example part for this model
Door stays locked after self-clean	Door lock motor or switches	Range oven door lock motor and switch assembly 5304528973
Oven heats incorrectly and throws odd faults	Temperature sensing circuit	Frigidaire range oven temperature sensor 316490000
Random control behavior or repeated fault	Control electronics	Frigidaire range oven control board 316630003

Why it matters

The oven door lock is a safety system used during self-clean. When the latch position feedback is wrong, the control protects you by stopping normal operation and flagging a fault like F90.

Helpful reference

For Kenmore range fault code patterns and what they mean across similar models, use Kenmore 790 self-cleaning range error codes.

Last updated: January 2026

To reset a Kenmore electric range model 79094192311, we recommend doing a full power reset: turn the range off, shut off power at the circuit breaker for 1 to 5 minutes, then restore power and reset the clock and any oven settings per the 79094192311 use and care guide.

Quick reset steps (most common)

• Turn all surface element knobs to OFF.
• Turn the oven OFF (cancel any bake, broil, or self-clean cycle).
• Switch the range breaker OFF (or remove the fuse).
• Wait 1 to 5 minutes to let the control fully power down.
• Switch the breaker ON.
• Set the clock and reselect your cooking function.

If the display is blank or the range seems dead

A “no power” symptom is often a supply issue, not a control failure.

• Confirm the breaker is fully reset (OFF then ON).
• If the range was recently installed or moved, check the power cord connection and terminal block area for loose or overheated wiring (power off first).
• If you see signs of heat damage at the cord connection, the terminal block is a common repair point.

Symptom after reset	Most likely area to check	Common next step
Display comes back, then acts erratic	Control needs a clean reboot	Repeat reset; then test bake/broil
Display stays blank	Power supply/connection	Verify breaker, cord, terminal block
Oven heats poorly or temperature is off	Temperature sensing/heating	Test bake/broil; consider sensor diagnosis

Why it matters

A power reset clears minor control glitches that can happen after a power interruption. Your manual also notes that after power is restored, you should reset the clock and the oven function, which is part of getting normal operation back.

When a reset is not enough

If the oven still will not heat, heats inconsistently, or throws an error code after a reset, the issue is usually a failed component (not a “stuck” setting). For this model, common suspects include the frigidaire range oven temperature sensor 316490000 or a heating circuit problem.

For error-code help specific to Kenmore ranges, use Kenmore 790 self-cleaning range error codes.

Last updated: January 2026