Whirlpool WRS325FNAH00 refrigerator Parts

A common disadvantage of a side-by-side refrigerator like the Whirlpool WRS325FNAH00 is reduced usable width in each compartment, which makes it harder to store wide items (pizza boxes, party trays) and can make fresh-food organization less convenient than other layouts.

Common side-by-side drawbacks

• Narrow shelves and door bins limit wide or bulky items.
• More bending for crisper drawers because fresh-food storage runs top-to-bottom.
• Freezer space can feel “tall and narrow,” so large frozen boxes may not fit well.
• Door swing clearance matters; you need room for both doors to open fully.
• More door openings can mean more temperature swings if you frequently access both sides.

Quick comparison: side-by-side vs other layouts

Layout	Best for	Main tradeoff
Side-by-side	Easy access to freezer items at eye level; narrow kitchens	Less width for large items
French door	Wide fresh-food shelves; large platters	Freezer items lower down
Top freezer	Simple, efficient storage	Fresh food lower; fewer features

Setup tips that reduce the downsides

Use these adjustments to make a side-by-side easier to live with:

• Set shelves to create one “tall zone” for pitchers and bottles.
• Keep everyday items at eye level; move rarely used items higher or lower.
• Make sure the refrigerator is level and doors close easily; follow the WRS325FNAH00 installation guide for leveling and alignment steps.
• Allow proper clearance and ventilation (space at sides, top, and behind) to help performance and reduce warm spots.

Why it matters

Side-by-side models trade shelf width for convenient vertical access. If your household stores lots of wide platters or large frozen boxes, the narrower compartments can be the deciding factor.

Last updated: January 2026

The Whirlpool WRS325FNAH00 side-by-side refrigerator has about 25.4 cubic feet of total capacity. For the most accurate breakdown (fresh food vs. freezer) and configuration details, we recommend confirming the capacity listing in the WRS325FNAH00 installation guide.

What “cubic feet” means for this refrigerator

Total capacity is the combined usable storage space in both compartments.

• Includes refrigerator section + freezer section
• Helps compare overall storage between models
• Does not reflect how shelves, bins, and the ice maker affect usable space
• Can vary slightly in “usable” feel based on door bins and shelf layout

Quick capacity reference

Spec	Value
Model	WRS325FNAH00
Refrigerator type	Side-by-side
Total capacity	25.4 cu. ft.

Why it matters

Capacity is one of the best ways to size a replacement refrigerator or confirm you are ordering the right accessories. If you are planning a move, cabinet fit and door swing clearance matter just as much as cubic feet, so we also recommend checking the dimensions and installation clearances in the WRS325FNAH00 installation guide.

Last updated: January 2026

Cooling complaints are the most common issue we see with Whirlpool refrigerators like model WRS325FNAH00, including “not cold enough” or “runs all the time.” Many cases trace back to airflow problems, door sealing issues, or normal longer run times from an energy-efficient compressor (especially after installation).

Most common symptoms (and what they usually point to)

• Refrigerator or freezer temperature is too warm
• Compressor seems to run too much (often normal, but can be worsened by conditions)
• Ice maker not producing ice or making small/hollow cubes
• Noisy operation (many sounds are normal during cycling)
• Doors not closing fully or doors look uneven

Quick checks we recommend first

• Give it time after setup: after a new installation, allow 24 hours for full cooling.
• Confirm power and controls: make sure cooling is turned on and the unit is plugged into a grounded 3-prong outlet (no extension cord).
• Check door closure: verify bins and shelves are seated correctly so doors close completely.
• Level and align: if the refrigerator rocks or doors are uneven, level the unit and align doors per the WRS325FNAH00 installation guide.
• For ice maker issues: confirm the water shutoff valve is fully open and the supply line is not kinked.

Common causes and typical fixes (at a glance)

Problem you notice	Common cause	Typical fix
Not cooling well	Doors not sealing, warm room, frequent openings	Improve door seal/closure, reduce openings, recheck temps after 24 hours
Runs constantly	Energy-efficient design, warm room, door left open	Verify door closure, allow longer run time, confirm airflow
Ice maker slow/small cubes	Water supply off or kinked line	Open shutoff valve fully, straighten water line
Frost or defrost-related cooling issues	Defrost system problem	Check defrost components such as the refrigerator defrost bi-metal thermostat WPW10225581 and refrigerator heater WP2323198

Why it matters

Cooling and ice maker problems often share the same root causes: restricted airflow, poor door sealing, or water supply restrictions. Fixing the basics first prevents unnecessary part replacement and helps the refrigerator reach stable temperatures.

Last updated: January 2026