Kenmore Elite 79579049311 refrigerator Parts

Your Kenmore Elite model 79579049311 is a refrigerator, not a washer, so washer tub capacity in cubic feet does not apply. For exact refrigerator capacity (fresh food and freezer), we use the specifications listed in the owner's manual.

We look for the capacity in the product specifications section. Common places it appears:

• Product specifications or features pages
• A model and serial label reference section
• A capacity line showing total cubic feet and sometimes separate fresh food and freezer volumes

If you are measuring for fit (not storage volume), use the exterior dimensions instead of cubic feet.

Even without the exact spec in the excerpted documentation, most Kenmore Elite refrigerators of this style fall into a predictable range:

Cubic feet helps you compare usable storage space, but it does not tell you whether the refrigerator will fit your kitchen opening. For installation planning, dimensions and door swing clearance matter more than capacity.

If the question came up because cooling seems weak or temperatures fluctuate, check the troubleshooting section in the owner's manual first; common causes include airflow blockage, dirty condenser area, or a failing evaporator fan motor.

Last updated: February 2026

Common problems on the Kenmore Elite refrigerator model 79579049311 include warm temperatures (poor cooling), ice maker not making ice, water leaks, unusual noises, and interior lights or controls acting up. These issues usually trace back to airflow restrictions, fan problems, defrost faults, or water-supply components; our owner's manual helps confirm the right checks for your exact setup.

• Not cooling or weak cooling: dirty condenser coil, evaporator fan not running, blocked air vents, defrost system icing up
• Ice maker problems: low water pressure, frozen fill tube, failed ice maker assembly, inlet valve not opening
• Water leaking: clogged defrost drain, loose water line, cracked bin, inlet valve seepage
• Noisy operation: evaporator fan motor, condenser fan area, compressor start components
• Lights not working or door alarm issues: door switch not closing consistently

1. Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
2. Make sure vents inside the compartments are not blocked by food packages.
3. Clean dust from the condenser area (a common cause of warm temps and long run times).
4. Listen for the evaporator fan: it should run when the compressor is running and the door switch is closed.
5. For ice and water issues, confirm the household shutoff valve is fully open and the supply line is not kinked.

Catching airflow and water-supply problems early prevents temperature swings that spoil food, reduces ice buildup from defrost issues, and helps avoid repeat failures caused by overheating or long compressor run times.

• Use Kenmore 795 model bottom freezer refrigerator error codes to interpret display or diagnostic codes.
• For filter-related flow issues, follow how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 10 to 15 years with normal household use. For Kenmore Elite model 79579049311, lifespan depends most on compressor health, airflow (clean coils and working fans), and keeping the doors sealing and aligned; our owner's manual covers the maintenance basics.

• Average: 10 to 15 years
• Common with good care: 12 to 16 years
• Upper end (excellent conditions): up to about 20 years

• Dirty condenser coil makes the sealed system work harder
• Weak door seals or misaligned doors cause long run times and temperature swings
• Poor airflow from a failing evaporator fan motor
• Water leaks that lead to ice buildup or corrosion
• Power issues (frequent outages or surges)

• Vacuum and brush the condenser area every 6 to 12 months
• Keep vents inside the fresh food and freezer sections unblocked
• Confirm doors close on their own and seals grip a paper strip all the way around
• Set temps to typical targets: 37°F fresh food, 0°F freezer
• Replace worn parts early (fans, switches, valves) to avoid bigger failures

Once a refrigerator starts running longer to hold temperature, energy use goes up and wear accelerates. Staying ahead of airflow, coil cleanliness, and door sealing is the simplest way to keep a Kenmore Elite refrigerator cooling reliably for its full expected lifespan.

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the appliance’s rating label; for this product line it’s typically inside the fresh food compartment on a side wall, inside the freezer on a side wall, or behind the lower kickplate. Use the model number to match the correct parts and owner's manual.

Check these common locations on Kenmore Elite refrigerators:

• Inside the refrigerator compartment on the left or right interior wall
• Inside the freezer compartment on an interior side wall
• On the door frame area (visible when the door is open)
• Behind the lower toe grille or kickplate at the front
• Near the crisper drawer area (sometimes behind or beside the drawers)

For this page, the model number format is 795.79049311 (often shown without the dot as 79579049311). Using the exact model number helps us pull the correct Kenmore parts list, diagrams, and compatible replacements.

A single digit difference can change fit and wiring; that affects parts like the ice maker, water inlet valve, and electronic control board.

• Write down the full model number exactly as shown on the label
• Also record the serial number (helpful for production variations)
• Match the model number to the parts list for Kenmore ELITE 79579049311
• Use the manual for location-specific instructions and feature details

Last updated: February 2026