Owner’s manual
How to look up chainsaw serial number?
On the Craftsman 358355160 gas chainsaw, the serial number is typically stamped into the engine area on a flat spot of the motor housing or crankcase, usually near the muffler. Once you find it, record it exactly as shown for parts lookup and service reference.
Where to check on the saw
Look for a stamped or printed number in these common locations:
- On the motor housing or crankcase
- On a flat surface to the left or right of the muffler (viewed from the top)
- Near the starter housing area
- On a model and serial tag or decal (if your saw uses a label instead of a stamp)
What the serial number usually looks like
Serial formats vary by production run, but many chainsaws use a numeric-only serial.
| Item | What you might see | What to do |
|---|---|---|
| Serial number | Often 9 digits | Write it down exactly, including leading zeros |
| Model number | 358355160 | Use this to match the correct parts list |
| Date code (sometimes) | Letters and numbers | Record it too if it appears near the serial |
Tips for reading a hard-to-see serial stamp
If the stamp is faint or dirty, these steps help:
- Clean the area with a rag and mild degreaser; avoid soaking the saw
- Use a flashlight at a low angle to make the stamping stand out
- Take a close-up photo and zoom in
- Rub chalk or a wax pencil lightly across the stamp, then wipe the surface
Why it matters
We use the serial number to confirm production details when parts changed during a model run. That helps you avoid ordering the wrong chain, guide bar, fuel system parts, or ignition components.
For additional identification and safety information, check the 358355160 owner's manual. If you need to order parts after you identify your saw, you can search by model number on Sears PartsDirect.
Last updated: February 2026
What model number is a Craftsman 16 36cc chainsaw?
For a Craftsman 16-inch, 36cc gas chainsaw, the model number depends on the exact saw series and label on your unit. If your saw is the Craftsman model 358355160, that model number is the correct identifier to use for parts, service information, and the correct guide bar and chain specs; confirm it on the data plate and in the Craftsman 358355160 owner's manual.
How to find the model number on your chainsaw
We recommend matching the number from the saw itself (not the bar or chain packaging).
- Look for a data plate or sticker on the powerhead housing (often near the rear handle or starter cover).
- Write down the full model number exactly as shown (for example, 358355160).
- If the label is dirty or faded, clean it gently and use a flashlight to read stamped characters.
- Use the model number to match the correct parts list, including the guide bar, chain, and fuel system parts.
Why the exact model number matters
Many Craftsman 16-inch saws share similar engine size and bar length, but parts can differ by model. The model number is what ties your saw to the correct illustrated parts list and maintenance procedures.
Common items that vary by model
- Guide bar mount pattern and length
- Chain pitch, gauge, and drive link count
- Fuel and oil cap style
- Carburetor and fuel line routing
- Clutch drum and sprocket type
Quick parts examples for model 358355160
If your saw is 358355160, these are examples of parts that may match this model page:
| Part type | Example part on this model page | What it affects |
|---|---|---|
| Chain | Chain 91PX056G | Cutting performance, fit on bar and sprocket |
| Guide bar | Guide bar 160SDEA041 | Bar length and chain tracking |
| Fuel cap | Fuel cap 530014347 | Sealing the fuel tank, preventing leaks |
What to do if your saw is a different 16-inch 36cc Craftsman
Use the model number from your saw to select the correct parts list. If you want to search beyond this model page, we recommend using your model number at Sears PartsDirect.
Last updated: February 2026
Where is the model number on a chainsaw?
On the Craftsman gas chainsaw model 358355160, the model number is typically printed on a label or stamped on a plate on the saw body (powerhead). Check the areas around the handlebar, starter housing, or near the fuel and oil cap area; our 358355160 owner's manual diagrams help you match what you see on your saw.
Common places to check on a gas chainsaw
Look for a paper sticker, foil label, or small metal plate in these spots:
- On the powerhead housing near the recoil starter cover
- Around the rear handle or control handle area
- Near the handlebar/front handle mounting area
- Close to the fuel cap and bar and chain oil cap area
- Along the bar clamp/clutch cover side of the saw
What the model tag usually looks like
Most chainsaw model tags include a few key fields. Use this quick guide when you find a label:
| What you see on the tag | What it means | What to write down |
|---|---|---|
| Model | The full model identifier | 358355160 |
| Part No. / Part number | Identifies a specific component | Helpful when ordering parts |
| Serial | Production identifier | Useful for service records |
Why it matters
We use the model number to match the correct illustrated parts list and compatible replacement parts for your exact saw. That helps avoid ordering the wrong items, especially for fit-sensitive parts like a guide bar or chain.
After you find it: parts you can match by model
Once you confirm the model number, you can choose parts that fit Craftsman 358355160, such as:
For ordering, use the parts list for this model first; you can also search by model number on Sears PartsDirect.
Last updated: February 2026
Should I use 40 1 or 50 1 fuel for a chainsaw?
For the Craftsman 358355160 gas chainsaw, we use a 40:1 fuel mix (40 parts gasoline to 1 part 2-cycle oil). This model’s 358355160 owner's manual specifies 40:1 oil and warns that too little oil can overheat and seize the engine.
What to use for this model (358355160)
Use fresh, regular unleaded gasoline mixed with air-cooled 2-cycle engine oil at 40:1.
- Mix fuel in an approved container, not in the fuel tank
- Shake or swirl the container to fully blend gas and oil
- Avoid “marine” oils and automotive oils (they lack the right additives for air-cooled 2-cycle engines)
- If the mix is too oily, the spark plug can foul and the saw can run poorly
- If the mix is too lean (not enough oil), the engine can overheat and seize
Quick mix chart (40:1)
| Gasoline amount | 40:1 oil amount | Notes |
|---|---|---|
| 1 gallon | 3.2 oz | Common single-can mix |
| 2.5 gallons | 8 oz | Matches the manual’s larger container example |
When people talk about 50:1
50:1 is common on many newer 2-cycle engines, but it is not the right choice when a saw is designed for 40:1. Using 50:1 in a 40:1 saw reduces lubrication and increases the risk of scoring, overheating, and seizure.
Why it matters
The fuel mix ratio directly controls engine lubrication in a 2-cycle chainsaw. On the 358355160, the correct 40:1 mix protects the piston, cylinder, and crank bearings while keeping starting and acceleration consistent.
Parts that often get blamed when the mix is wrong
If the saw starts hard, runs rough, or won’t accelerate after you correct the fuel mix, these are common next checks:
- Spark plug condition (fouling from an overly rich oil mix)
- Air filter cleanliness
- Carburetor metering components (diaphragm and gaskets)
- Fuel system leaks or restrictions (cap, lines, fittings)
If you’re chasing a fuel leak or fuel delivery issue, the parts list for this model includes items like the fuel cap 530014347 and fitting 530023877. You can order the correct replacement parts for your model from the parts list on this page, or search by model number on Sears PartsDirect.
Last updated: February 2026
