Owner’s manual
View engine
What kind of engine does a Craftsman riding lawn mower have?
The Craftsman lawn tractor model 917272060 uses a 16.0 HP, low-emission engine with electric start, as shown in the 917272060 owner's manual.
From the manual, this tractor is configured as:
- 16.0 HP engine
- Low-emission design (operates differently than older engines)
- Electric start
- 42-inch mower deck
- Automatic lawn tractor (automatic drive system)
“Kind of engine” can refer to brand (for example, Briggs & Stratton), cylinder count, or horsepower. For 917272060, the manual confirms horsepower and emissions design, but the most reliable way to identify the exact engine make and model is to match the engine model/type code on the engine label to the parts listing for your tractor.
- Look for an engine label on the blower housing or valve cover
- Record model, type, and code exactly as printed
- Compare that information to the tractor’s engine parts breakdown in the manual and parts list
The exact engine make and model determines the correct maintenance and repair parts (spark plug, air filter, fuel filter, belts) and the right tune-up specs. Using the wrong engine-specific part can cause hard starting, poor performance, or premature wear.
These are common tractor/deck items for this model that customers often replace when performance drops:
| Maintenance area | What you might notice | Example part on this page |
|---|---|---|
| Cutting performance | Uneven cut, poor mulching | Husqvarna lawn tractor mulching blade, 21-in 532134149 |
| Deck drive components | Blades stop or slip under load | Lawn tractor ground drive belt, 1/2 x 82-in 532140294 |
| Starting system | Clicks or intermittent cranking | Solenoid 532146154 |
For ordering model-specific parts beyond the items listed here, use the parts list for model 917272060 or search by model number on Sears PartsDirect.
Last updated: February 2026
What year was Craftsman 917272060 made?
The Craftsman lawn tractor model 917272060 does not have a single “model year” published in the parts manual; this model number identifies a configuration that can be produced across more than one season. To pinpoint your tractor’s build year, match the serial number and date code on the tractor’s ID label to the identification section in the 917272060 owner's manual.
Use the tractor’s product identification label first; that label is the most reliable source for the build date.
- Look for the ID label under the seat, on the frame rail, or near the rear fender area.
- Record the model number (917272060) and the serial number exactly as shown.
- Check the label for a date code or manufacturing code printed near the serial.
- Compare what you find to the identification and decal information in the manual.
- If the label is damaged, match major assemblies using the diagrams and parts lists.
When labels are missing or hard to read, matching a few common components helps confirm you are working with the correct 917272060 setup.
| Component area | Example part used on this model | What it helps confirm |
|---|---|---|
| Ignition | Molded ignition key 532140403 | Key style and ignition switch family |
| Starting circuit | Solenoid 532146154 | Starter solenoid style used in the wiring layout |
| Mower deck spindle system | Husqvarna lawn tractor mandrel assembly 532130794 | Deck mandrel and pulley configuration |
The build year affects small but important fit details such as wiring harness routing, safety interlock switches, deck lift linkage, and belt routing. Confirming the ID label information before ordering prevents wrong-part returns and repeat repairs.
For ordering, use the parts list for model 917272060 first; if you need additional items, search by model number on Sears PartsDirect.
Last updated: February 2026
Where can I find my lawn mower engine model number?
On Craftsman lawn tractor model 917272060, the engine model information is listed in the documentation and on the engine itself. The 917272060 owner's manual identifies the engine as a Kohler CV460, type 26509; on the tractor, the engine ID is typically on a label or stamped/printed on the engine shroud or blower housing.
Check these common spots first (engine off and cool):
- Top of the engine shroud (blower housing cover)
- Side of the engine shroud near the air intake or carburetor area
- Near the spark plug area on the shroud
- On a valve cover or nearby flat metal surface (sometimes stamped)
- Under heavy dirt or grass buildup; wipe the area clean to reveal the tag
For parts lookup and correct service information, we recommend capturing all of these if present:
- Engine model (example for this tractor: CV460)
- Type number (example for this tractor: 26509)
- Spec number (often included on the engine tag, even if the manual excerpt does not show it)
| Item | What you may see | What it’s used for |
|---|---|---|
| Tractor model | 917272060 | Finding tractor parts diagrams and chassis parts |
| Engine model | Kohler CV460 | Matching engine family parts and service info |
| Engine type | 26509 | Matching the exact engine build configuration |
Small differences in engine type/spec can change ignition, carburetor, fuel system, and muffler parts. Using the exact engine model and type helps you avoid ordering the wrong part and speeds up troubleshooting.
If you’re ordering tractor parts by model, you can also search by model number on Sears PartsDirect.
Last updated: February 2026
