Kenmore Elite 79631513211 washer Parts

Yes. Kenmore Elite is Kenmore’s higher-end line; it’s positioned above standard Kenmore models and typically includes upgraded features, quieter operation, and more premium styling. For your Kenmore Elite washer model 79631513211, the 79631513211 owner's manual is the best place to confirm the exact feature set.

What “high end” usually means for Kenmore Elite washers

Kenmore Elite washers are commonly considered high end because they tend to focus on performance and convenience features that matter in daily laundry.

• Larger capacity and better load handling
• More cycle options (bulky items, deep fill variations, specialty cycles)
• Higher spin performance for better water extraction
• More advanced controls and diagnostics
• Improved vibration control and noise reduction

How to tell if your specific 79631513211 is “high end” in practical terms

We recommend checking these items on your unit and in the manual; they are the clearest indicators of a premium washer experience.

What to check	What it indicates	Where to confirm
Control panel options	More cycles and settings usually means a higher-tier model	79631513211 owner's manual
Spin performance	Higher spin reduces dry time	Cycle chart in the manual
Noise and vibration	Better suspension and balance control	Normal operation notes
Service diagnostics	Faster troubleshooting when issues happen	Diagnostic section

Why it matters

“High end” is most useful when you are comparing repair cost versus replacement value. Premium models often use more specialized components; for example, if you’re diagnosing wash action or poor cleaning, the washer washplate AGZ72909711 is one of the key parts that directly affects how clothes move through the wash.

Parts and support options

If you’re maintaining this washer long-term, we stock common repair parts for this model, including:

• Washer lid lock EBF61674802 (won’t start, lid won’t lock)
• Washer drain pump assembly 5859EA1004P (won’t drain, water left in tub)
• Lg washer water inlet valve assembly AJU73213301 (won’t fill, slow fill)

For additional parts lookups by model number, you can also search on Sears PartsDirect.

Last updated: February 2026

To force-drain a Kenmore Elite washer model 79631513211, we use the drain-only function if the controls respond; if the washer is unresponsive or won’t drain, we manually drain through the pump filter area and then correct the cause (clog, kinked hose, or failed pump).

Fast ways to drain (start here)

• Try a drain/spin cycle: Select Drain/Spin (or Spin Only) and press Start.
• Cancel and restart: Press Pause/Cancel once, wait 30 seconds, then try Drain/Spin again.
• Power reset: Unplug the washer for 2 minutes, plug it back in, then try Drain/Spin.

Manual drain through the pump filter (when it won’t drain)

1. Unplug the washer.
2. Put towels down and use a shallow pan.
3. Open the lower front access area (where the drain pump filter is located).
4. Slowly loosen the filter cap to let water trickle out; pause as the pan fills.
5. Remove debris from the filter, reinstall the cap, then run Drain/Spin.

What to check while you’re there

• Drain hose kinked, crushed, or pushed too far into the standpipe
• Coins, lint, socks, or hairpins in the pump filter
• Standpipe or sink drain backing up
• Pump impeller jammed (often a grinding or humming sound)

Parts that commonly fix “won’t drain”

If the filter is clear and the washer still won’t drain, these model-compatible parts are common fixes:

Symptom	Most likely area	Part to consider
Hums but won’t drain	Drain pump jammed/failed	Washer drain pump assembly 5859EA1004P
Drains slowly or leaks	Drain hose restricted/damaged	Washer drain hose AEM73213001
Overfills or won’t sense water level correctly	Pressure sensing issue	Lg washer water-level pressure switch 6501EA1001R

Why it matters

A forced drain gets water out quickly, but clearing the restriction (or replacing the failed drain component) prevents repeat ND/drain problems, odor from standing water, and pump damage.

For model-specific control steps and panel access details, use the owner's manual. You can also order replacement parts for model 79631513211 from the parts list for this washer, or search by model on Sears PartsDirect.

Last updated: February 2026

Yes. Kenmore Elite washer model 79631513211 uses filtering in the drain system to help catch lint and small debris before water is pumped out. On many Kenmore top-load designs, this is a serviceable drain pump filter or trap area you access for cleaning; check the 79631513211 owner's manual for the exact access method.

Where the “filter” is on this washer

Depending on the exact configuration, you will typically find filtering in one of these places:

• Drain pump filter or trap: a clean-out point that can collect coins, hair pins, lint, and small fabric pieces
• Drain hose path: debris can lodge where the hose connects to the pump or at the standpipe
• Tub-to-pump inlet area: items can block flow before the pump

If your washer is not draining well, the drain system is the first place we check.

Signs the filter or drain path needs cleaning

• Water left in the tub at the end of the cycle
• Slow drain, gurgling, or repeated drain attempts
• Spin problems caused by standing water
• A burning smell or loud pump noise during drain
• Intermittent “won’t drain” behavior after washing small items

Safe, practical cleaning steps (no special tools)

1. Unplug the washer.
2. Turn off both water supplies.
3. Place towels and a shallow pan near the lower front area.
4. If your model has a pump clean-out, open it and drain water slowly.
5. Remove debris, rinse the screen, and reinstall securely.

Parts that commonly relate to “filter” and draining

If cleaning does not restore normal draining, these parts are the most common next checks:

Symptom	Most likely area	Related part on this model
Hums or rattles, drains poorly	Drain pump	Washer drain pump assembly 5859EA1004P
Drains slowly or leaks at outlet	Drain hose	Washer drain hose AEM73213001
Won’t fill correctly (not a drain issue)	Water level sensing	Lg washer water-level pressure switch 6501EA1001R

Why it matters

A clogged drain filter or pump trap can cause no-drain, poor spin performance, odors, and extra wear on the drain pump. Keeping the drain path clear helps your Kenmore Elite washer run quieter and finish cycles normally.

You can order replacement parts for model 79631513211 from the parts list for this washer, or search by model on Sears PartsDirect.

Last updated: February 2026

To hard reset a Kenmore Elite washer model 79631513211, we unplug the washer (or switch off the breaker) for 1 minute, restore power, then run a quick cycle to confirm the controls respond normally. For model-specific reset steps, use the 79631513211 owner's manual.

Hard reset steps (power reset)

• Press Power to turn the washer off.
• Unplug the washer (or turn the circuit breaker off).
• Wait 60 seconds.
• Plug the washer back in (or turn the breaker on).
• Press Power.
• Start a Rinse/Spin (or a short cycle) with the tub empty.

If the washer still will not start

These checks solve most “won’t start” and “buttons not responding” complaints after a reset:

• Confirm the lid is fully closed; a failed lid lock can prevent starting.
• Make sure the outlet has power; test with a lamp or small appliance.
• Cancel the cycle, then reselect the cycle and options.
• If the tub will not drain, clear the drain path; a drain problem can stop the control from advancing.

Common parts related to “won’t start” symptoms

Symptom after reset	Most likely area	Example part for this model
Won’t lock or start	Lid lock system	Washer lid lock EBF61674802
Won’t fill	Water inlet system	Lg washer water inlet valve assembly AJU73213301
Won’t drain/spin out	Drain system	Washer drain pump assembly 5859EA1004P

Why it matters

A hard reset clears a “stuck” control state after a power glitch and is the fastest first step before replacing parts like the lid lock, inlet valve, or drain pump.

If you need to order parts for Kenmore Elite 79631513211, we list model-matched parts on this page, and you can also search by model on Sears PartsDirect.

Last updated: February 2026

Yes, repairing a Kenmore Elite washer like model 79631513211 is worth it when the fix restores reliable operation for significantly less than replacing the washer. We use the symptoms, error codes, and the repair cost (parts plus labor) to decide if repair delivers good value.

A practical repair-vs-replace checklist

• Repair it when the washer is otherwise in good shape and the issue is a common service item (drain, fill, lid lock, agitation).
• Repair it when the problem is isolated and parts are available (pump, valve, switch, shifter).
• Consider replacing when multiple major systems are failing (drive system plus control plus tub issues).
• Consider replacing when the washer has severe vibration, repeated leaks, or chronic electrical problems.
• Decide faster by matching the symptom to a likely part, then comparing total repair cost to replacement cost.

Common failures that are usually worth fixing on 79631513211

Many repairs on this Kenmore platform are straightforward and restore full performance.

Symptom	Common cause	Example part on this model page
Won’t drain or drains slowly	Drain pump jammed or failed	Washer drain pump assembly 5859EA1004P
Won’t fill or fills slowly	Inlet valve issue or supply restriction	Lg washer water inlet valve assembly AJU73213301
Lid won’t lock, won’t start/spin	Lid lock/switch failure	Washer lid lock EBF61674802
Overfills/underfills, level seems wrong	Pressure switch or hose issue	Lg washer water-level pressure switch 6501EA1001R

Why it matters (cost and reliability)

A targeted repair (for example, replacing a drain pump or inlet valve) typically costs far less than a new washer and often eliminates the root cause immediately. Using the troubleshooting steps and error code guidance in the 79631513211 owner's manual helps prevent replacing the wrong part.

Tips to make the decision with confidence

• Write down the exact symptom (won’t spin, won’t drain, loud grinding, leaking).
• Check for standing water, unusual noises, or intermittent power issues.
• Inspect the easy items first: hoses, clogs, and lid closure.
• If you’re ordering parts, start with the parts list for model 79631513211, or search by model on Sears PartsDirect.

Last updated: February 2026