LG WM3370HVA/00 washer Parts

The LG WM3370HVA washer has a 4.3 cu. ft. capacity. That size is designed to handle everyday family loads efficiently while still fitting the standard 27-inch front-load footprint shown in the WM3370HVA owner's manual.

A 4.3 cu. ft. LG front-load washer is built for medium-to-large loads. For best wash performance and spin balance, we recommend:

• Load items loosely; do not pack the drum tight
• Keep bulky items (comforters, blankets) to one at a time when possible
• Mix large and small items to reduce out-of-balance spinning
• Use HE detergent and measure carefully to prevent oversudsing
• Choose the correct cycle and soil level for the fabric type

Capacity affects cleaning, rinse performance, and vibration. Overloading a front-load washer can lead to poor turnover, longer cycle times, and more frequent unbalanced loads, even when the washer is level.

For the most accurate model-specific information (including features and cycle guidance), use the WM3370HVA owner's manual.

Last updated: February 2026

Drain and water-flow problems are the most common issues we see with LG washers like model WM3370HVA; they show up as slow or no draining, fill errors from clogged inlet screens, or cycles that stop mid-wash. Odor and mold around the door seal are also common on front-load designs.

• Slow or no drain: standing water, long drain times, or a drain-related error; often tied to a clogged filter, kinked hose, or a failing pump.
• Fill problems: weak fill, fill errors, or long fill times; commonly caused by clogged inlet filters or low water pressure.
• Door won’t lock or unlock: cycle won’t start, or door stays locked; points to the lock or strike.
• Odor or mildew: musty smell from moisture trapped in the tub or door boot.
• Out-of-balance shaking: vibration during spin from load size, leveling, or suspension wear.

1. Unplug the washer before any inspection.
2. Confirm the drain hose is not kinked and is routed correctly; many drain complaints are simple hose issues.
3. Clean the inlet screens if filling is weak (the manual notes clogged inlet filters can trigger a fill-related message).
4. Run the washer’s tub-clean routine and keep the door slightly ajar between loads to help the interior dry.

Drain and fill issues can stop a cycle, leave water in the tub, and strain components. Odor and mold usually come from trapped moisture; improving drying habits and routine cleaning prevents repeat problems.

For model-specific cleaning steps, error message meanings, and maintenance intervals, use the WM3370HVA owner's manual.

Last updated: February 2026

LG parts for the LG WM3370HVA washer often cost more because they are built to meet LG’s fit, performance, and safety standards for that exact machine, and many are sold as complete assemblies (not small sub-pieces). Using the correct part also helps prevent leaks, noise, and repeat repairs.

• Model-specific engineering and testing: Parts are designed to match the WM3370HVA’s controls, sensors, and load handling.
• Assembly-level replacements: Items like a door lock or drain pump are commonly replaced as a unit, which raises cost.
• Materials and durability: Seals, housings, and electrical components are built for heat, vibration, and moisture.
• Supply chain and availability: In-stock OEM parts can cost more than generic alternatives.
• Warranty and compatibility expectations: OEM parts are made to fit correctly and operate within design tolerances.

These WM3370HVA components are common “precision fit” items where correct mounting, connectors, and sealing are important:

• Drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T
• LG washer door lock EBF61315802
• LG washer door boot MDS47123602
• Washer water-level pressure switch 6601ER1006G

A cheaper part that does not match the original specs can cause issues like slow draining, door not locking, or leaks at the door boot. LG’s manual also emphasizes using authorized components and proper hose practices to reduce failures and water damage; we recommend following the WM3370HVA owner's manual.

Last updated: February 2026

For the LG WM3370HVA washer, replacing the rubber door seal (door boot/gasket) typically costs about $120 to $350 total. The part commonly runs $80 to $160, and professional labor is usually $150 to $250; DIY replacement mainly costs the part plus basic tools.

• OEM vs compatible part: OEM usually costs more but fits and seals more consistently.
• Clamp style and access: Some front-load designs require more disassembly time.
• Extra damage: A torn boot can hide issues like a loose clamp, debris, or door alignment problems.
• Local labor rates: Service pricing varies by region and minimum trip charges.
• Related parts: If the door is not latching correctly, the boot can get stressed and fail again.

If you see leaks at the front, also check these common contributors:

• Door not closing squarely (hinge or door alignment)
• Door not latching consistently (consider the LG washer door lock EBF61315802)
• Boot clamp popped off or stretched (the spring clamp is often involved)
• Excess suds pushing water past the boot (too much HE detergent)

A leaking door boot can let water reach the lower cabinet area, which increases the chance of corrosion, odor, and drain or electrical problems. Keeping the door slightly ajar between loads helps the interior dry and reduces mildew that can shorten gasket life (see the WM3370HVA owner's manual).

Last updated: February 2026

LG washing machines typically last 10 to 15 years. For your LG WM3370HVA, you can stay in that range by keeping water supply hoses and inlet filters in good shape, and by fixing drain, fill, or door-lock problems quickly using the WM3370HVA owner's manual.

A washer’s service life is mostly driven by load size, cycle frequency, water quality, and routine maintenance.

• Light use (few loads/week): often closer to 15 years
• Average family use: commonly 10 to 15 years
• Heavy daily use: often closer to 10 years
• Hard water areas: can shorten life if inlet filters clog repeatedly
• Delayed repairs: small leaks or slow draining can turn into bigger failures

The WM3370HVA manual calls out several items that directly protect components.

• Replace water inlet hoses every 5 years and check periodically for cracks or leaks
• Tighten hose connections correctly; do not overtighten
• Flush water lines into a bucket before connecting (helps prevent debris from entering)
• Clean the water inlet filters if water pressure is weak or an inlet filter is clogged
• Use only authorized components when replacing parts

If the washer is otherwise in good condition, replacing a common wear part can add years of reliable use.

• Won’t drain or drains slowly: consider the drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T
• Won’t fill or fills slowly: check inlet screens first; then consider the LG washer single-solenoid water inlet valve 5220FR2006H
• Door won’t lock or cycle won’t start: consider the LG washer door lock EBF61315802

A front-load LG washer like the WM3370HVA depends on steady water flow, tight hose connections, and reliable draining. Keeping hoses and inlet filters maintained reduces leaks, fill errors, and pump strain, which are common reasons washers fail early.

Last updated: February 2026

Yes. The LG WM3370HVA front-load washer is designed to be stacked with a compatible LG dryer when you use an LG-approved stacking kit and follow the stacking and clearance requirements in the WM3370HVA owner's manual.

Stacking means the washer stays on the floor and the dryer is secured on top using a manufacturer-approved stacking kit.

• Use the correct LG stacking kit for your exact dryer model
• Never place the washer on top of a dryer
• Level the washer before stacking to reduce vibration and out-of-balance movement
• Do not improvise with generic brackets, screws, or straps
• Keep access to water shutoff valves, drain, and power after installation

The WM3370HVA specifications list these dimensions:

Use this quick check to avoid mismatches:

• Confirm the dryer model number on its rating label
• Verify the stacking kit is approved for that dryer and the WM3370HVA
• Confirm your closet or alcove clearances (rear hose space and door swing)
• Plan for vibration control (solid floor, washer leveled, feet locked)

A correct stacking kit and proper leveling prevent tipping risk, excessive vibration, and cabinet damage; they also help the inverter direct drive system run smoothly and quietly.

Last updated: February 2026

Yes. On the LG WM3370HVA washer, an OE error usually means the washer is not draining fast enough; you can often fix it yourself by cleaning the drain pump filter, straightening the drain hose, and clearing common clogs before replacing any parts. See the WM3370HVA owner's manual for model-specific safety steps.

• Unplug the washer before opening any access panels or handling wiring.
• Bail out standing water if needed, then clean the drain pump filter area.
• Check the drain hose for kinks, crushing, or a clogged standpipe at the wall.
• Make sure the drain hose is not pushed too far down the standpipe (it can siphon or restrict flow).
• Run a Drain/Spin cycle after clearing obstructions to confirm normal draining.

If the filter and hose are clear but the washer still drains slowly, hums, or stops with OE, the drain pump can be failing.

Common OE-related parts for this model:

• Drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T
• Washer tub-to-pump hose 4738ER1002A

An OE condition leaves water in the tub, can prevent high-speed spin, and can lead to odors or residue. Restoring proper drain flow protects the pump, improves wash results, and helps the door seal area dry out between loads.

Last updated: February 2026