Washer Door Boot MDS47123602

Worked as expected. No leakage. Installation took some time but wasn't hard by following youtube video. I wasn't able to do it through the door so I had to take apart a lot of the exterior.

We're the second owners so the original gasket wasn't looking so good. Installation was easy through following along with easily searchable YouTube videos. Would have been easier if I had a spring expansion tool but I knew what I was getting myself into. Have run several successful loads of wash since then with no leaks.

Part fit perfectly - took a while to finagle it into place and get the spring trim re-installed (worth getting the tool for it), but it's just what we needed.

The piece needed to be replaced and it worked out well

The job to replace the washer door was straight forward. The boot itself is high quality like the factory original one I removed. One thing to be aware of, I ordered two new spring clamps, and they were not the same size. Make sure you put the larger one near the drum and the smaller one near the door.

Was very easy to install and reasonable priced.If you have just the slightest mechanical ability than you can install this.

Plenty of videos on YouTube to do this yourself. Very straight forward repair / replace.

Took about an hour to install, followed an instructional video online and worked great!