Kenmore 79092303013 electric range Parts

To reset your Kenmore electric range model 79092303013, turn the range off and restore power with a hard power reset (breaker off, then back on). This clears many control glitches after a power surge or a stuck key, and it is the safest first step before replacing parts.

• Turn all surface element knobs to OFF.
• Switch the range circuit breaker OFF (or remove the fuse) for 5 minutes.
• Switch the breaker ON.
• Set the clock and test Bake and a surface element.
• If an error code returns, use the troubleshooting steps in the owner's manual.

A “reset” will not help if the range is not getting proper power.

• Confirm the breaker is fully on (flip OFF, then ON).
• If the range was recently installed or moved, check for a loose or overheated power connection at the terminal block.
• Follow the wiring method that matches your home (3-wire for existing installations only; 4-wire for new/remodeled circuits and mobile homes).
• Do not loosen the factory-installed nuts that secure the range wiring to the terminal block.

A hard reset is a fast way to clear temporary electronic faults without disassembling the range. If the problem comes back immediately, it points to an underlying issue such as a failing sensor, wiring problem, or control input problem.

If resetting does not help and you are troubleshooting heating performance, these model-compatible parts are common suspects:

• Frigidaire range oven temperature sensor 316490000 (temperature sensing)
• Range bake element 316413800 (bake heat)
• Range broil element 316203301 (broil heat)

Last updated: February 2026

Kenmore model numbers are read left to right: the first 3 digits identify the manufacturer family, and the remaining digits identify the specific design and feature variations. For your Kenmore electric range model 79092303013, the 790 prefix is the key identifier to use when matching parts and troubleshooting info in the owner's manual.

We recommend using the full model number exactly as shown on the rating label (no missing digits) because even small changes can affect part fit.

Common places to check:

• Oven door frame area (open the oven door and look around the frame)
• Storage drawer frame (pull the drawer out and look along the frame)
• Back panel of the range
• Side frame behind the lower access panel (if equipped)

Kenmore numbers usually follow a predictable pattern that helps you identify the correct parts list.

The prefix helps narrow the correct parts system and diagrams. When you are ordering or diagnosing issues (like an oven not heating or a surface element not working), using the complete model number helps ensure you land on the correct control, element, sensor, or wiring configuration.

If you are troubleshooting an error code on a Kenmore range with a 790 prefix, use our model-family guide: Kenmore 790 self-cleaning range error codes.

• Use the full model number 79092303013 (not just “790”)
• Match the part by name and ID, not by appearance alone
• Cross-check the diagram location in the owner's manual before ordering

Last updated: February 2026

A Kenmore electric range like model 79092303013 typically lasts 13 to 15 years with normal household use and basic maintenance. Lifespan depends most on heat exposure, electrical connection quality, and how often high-heat cooking and self-clean are used.

• Electrical supply and connections: loose or overheated connections shorten component life.
• Heating components: bake and broil elements wear from repeated high-heat cycles.
• Door seal condition: leaks force longer heat times and stress elements and controls.
• Self-clean frequency: extreme heat can accelerate wear on electronics and door-lock parts.
• Spills and moisture: can damage switches, wiring, and indicator lights.

• Keep the oven cavity and vent area clean to prevent heat retention and odor.
• Avoid slamming the oven door; it protects hinges, handle, and door seal.
• Use cookware that matches burner size to reduce cycling stress.
• If baking temps seem off, run a temperature check and calibrate if your control allows it (see the 79092303013 owner’s manual).
• Follow safe clearance and installation practices from the 79092303013 installation guide to prevent heat and electrical issues.

Knowing the expected 13 to 15 year lifespan helps you decide whether to repair or replace. If your range is within that window, replacing common wear parts (like an element or sensor) often restores performance and is usually more cost-effective than replacing the entire appliance.

Last updated: March 2026