Kenmore 10657575791 refrigerator Parts

On Kenmore model 10657575791 side-by-side refrigerators, the model number is printed on the model and serial number label inside the fresh food (refrigerator) compartment, typically on the side wall. The exact label location is shown in the 10657575791 owner's manual.

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the inside side walls at about mid-height
• Check near the crisper and meat drawer area (label is often nearby)
• Use a flashlight; the label can be easy to miss in low light
• Wipe dust or residue off the label so the numbers are readable

The label typically includes both identifiers you may need for parts and service.

We use the model number to match the correct Kenmore parts diagrams and compatible replacement parts (like an ice maker assembly, thermostat, or door gasket). The serial number helps narrow down production variations when a model has multiple revisions.

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the label for future reference
• Keep it with your purchase paperwork for quicker ordering and troubleshooting

Last updated: January 2026

For your Kenmore refrigerator model 10657575791, the most reliable way to confirm cubic feet (capacity) is to look it up in the specifications section of the 10657575791 owner's manual. If you need a quick estimate, you can calculate capacity by measuring the interior and converting cubic inches to cubic feet.

• Check the specifications/capacity section in the 10657575791 owner's manual.
• Look for a model and serial tag inside the fresh food compartment (often on a side wall or ceiling area); use the model number to match specs.
• Estimate it yourself by measuring the usable interior (not the outside cabinet).

1. Empty a shelf area enough to measure accurately.
2. Measure the interior width, depth, and height in inches.
3. Multiply: width x depth x height = cubic inches.
4. Divide by 1,728 to convert to cubic feet.

• Measure the main open cavity, then subtract space taken by fixed features (air ducts, light housings, ice chute area).
• If you measure both compartments, calculate fresh food and freezer separately, then add them.
• Use the largest rectangular space you can measure consistently; shelves and bins vary.

Capacity helps you compare replacement parts and accessories (like bins and pans), plan food storage, and understand cooling expectations for a side-by-side layout.

Last updated: January 2026

Kenmore side-by-side refrigerators like model 10657575791 typically do not have a single, dedicated “reset button.” The practical reset is a power reset: turn the refrigerator control to OFF, disconnect power briefly, then restore power and set the control back to your normal temperature setting (see the 10657575791 owner's manual).

• Turn the thermostat or refrigerator control to OFF.
• Unplug the refrigerator (or switch off the circuit breaker).
• Wait about 5 minutes to let the control fully power down.
• Restore power.
• Set the control back to your normal setting and allow 24 hours for temperatures to stabilize.

Different symptoms point to different fixes. Use this quick guide to choose the next step.

If the “reset” you need is really an ice maker recovery, these model-compatible parts are commonly involved:

• Ice maker assembly - refrigerator ice maker by whirlpool 4317943 (no ice production or intermittent cycling)
• Refrigerator ice bin WPW10670845 (ice not dispensing, bin cracked, or auger issues)
• Refrigerator water tube W10823511 (slow fill, frozen tube symptoms)

A true reset button is rare on refrigerators; most “reset” situations are either a control power cycle or a symptom that needs a targeted check (power, controls, ice maker water supply, or dispenser components). Following the manual’s OFF and unplug steps also reduces electrical shock risk during troubleshooting.

Last updated: January 2026

If your Kenmore 10657575791 side-by-side refrigerator ice maker isn’t making ice, the most common causes are the freezer not being cold enough, the ice maker shutoff arm being OFF (up), or the refrigerator water supply valve being turned off. Use the checks below, then follow the steps in the 10657575791 owner's manual.

• Confirm the freezer is cold enough for ice production; after changes, allow 24 hours.
• Make sure the ice maker arm is ON (arm down), not OFF (arm up).
• Verify the home shut-off valve to the refrigerator is fully turned on.
• Look for a cube jammed in the ejector arm; remove it with a plastic utensil.
• If the unit was just hooked up, wait 24 hours for first ice.
• If you recently emptied the bin or used a lot of ice, allow 24 hours to recover.

1. Set expectations: After installation, full output can take up to 72 hours; typical production is 70 to 120 cubes per 24 hours once cooled.
2. Check freezer temperature: If foods feel soft or ice cream is not firm, correct the temperature settings and wait 24 hours.
3. Confirm water supply: Ensure the supply shut-off valve is on and the water line is not restricted.
4. Clear mechanical jams: Remove any stuck cube from the ejector area using a plastic utensil.
5. Inspect the ice maker itself: If the mold stays dry after water supply and temperature checks, the ice maker assembly may be the issue.

An ice maker needs two things to work reliably: cold enough freezer temperatures and steady water flow. Fixing those first prevents unnecessary part replacement and usually restores ice production quickly.

Last updated: January 2026