Kenmore Elite 72188513900 microwave/hood combo Parts

The Kenmore Elite microwave/hood combo model 72188513900 measures 29-15/16 inches wide, 16-7/16 inches high, and 15-3/8 inches deep. These are the overall cabinet dimensions used for planning an over-the-range installation.

Even with the correct overall size, we recommend checking the opening and clearances called out in the installation instructions.

• Confirm the cabinet opening is at least 30 inches wide
• Verify the mounting location is centered on studs (typical stud spacing is 16 inches)
• Plan for the required space between the mounting plate and the cooktop or range
• Make sure the power supply is a dedicated 120V, 60Hz, 20A circuit
• If you are replacing an older unit, compare the old mounting plate and venting path before drilling

For the exact clearance requirements and mounting template steps, use the installation guide.

Correct dimensions and clearances prevent installation problems like misaligned mounting holes, cabinet interference, and poor venting performance. Getting the width, height, and depth right also helps ensure the door opens freely and the unit sits level.

Last updated: February 2026

Kenmore microwaves are a good choice for most kitchens because they’re built for dependable everyday cooking and ventilation; overall satisfaction comes down to the exact model and how it’s used and maintained. For Kenmore Elite model 72188513900, the Use & Care Guide emphasizes safe operation, proper cookware, and correct accessory use, which directly impacts performance and longevity.

A microwave/hood combo has two jobs: heating food and moving air/grease/smoke. A “good” unit typically delivers consistent heating, reliable door safety operation, and effective venting.

Key things we look for:

• Even heating with appropriate cookware (no metal trim that can cause arcing)
• Reliable door operation and safety interlocks
• Practical features you actually use (sensor cooking, convection on some models)
• Easy-to-maintain filters and light
• Clear controls and audible signals you can enable/disable

The manual for this series calls out cookware and accessory rules that prevent arcing and damage.

Best practices:

• Use glass or glass-ceramic for microwave, convection, and combination cooking
• Avoid metal trim on dishes (it can spark and damage the oven cavity)
• Do not run the microwave empty (except when preheating for convection)
• If the display flashes after an outage, reset the clock per the 72188513900 owner’s manual

Most “bad microwave” experiences trace back to cookware issues (sparking), running the unit empty, neglected filters, or power interruptions affecting settings. Following the operating guidance in the manual helps prevent avoidable failures and keeps cooking results consistent.

Last updated: February 2026

For Kenmore Elite microwave/hood combo model 72188513900, the model number is printed on the model and serial number label. You can find that label either on the oven front (behind the vent grille area) or on the identification plate inside the microwave door; confirm the full number before ordering parts.

• Oven front: the installation instructions show the model number label on the front of the oven.
• Inside the door: the use and care guide notes an identification plate inside the microwave door.
• Write down both numbers: record the model number and serial number for parts lookup and service history.
• Use good lighting: the label is often small and easier to read with a flashlight.

Kenmore microwave/hood combos can look similar across model series (for example, 721.88512 and 721.88513). Using the exact model number from the label helps ensure the right fit for parts like a grease filter, vent grille, or door interlock switch.

For pictures and placement details, use the installation guide and the owner's manual.

Last updated: March 2026