Official Kenmore Elite microwave/hood combo parts

Replacing the turntable motor in your Kenmore Elite microwave hood combo

• Unplug the microwave hood combo power cord to disconnect electrical power.
• Open the microwave door and remove the turntable. Pull the turntable motor coupler off the turntable motor shaft. Close the door.
• Remove the grease filters from the bottom panel of the microwave hood combo. Set the grease filters aside.
• Remove the bottom panel mounting screws. Support the bottom panel as you remove the final mounting screw.
• Allow the bottom panel to drop down slightly then disconnect the cooktop light wire harness. Remove the bottom panel.
• Remove the turntable mounting screws and pull out the turntable motor. Install the new turntable motor and secure it with the mounting screws.
Reassemble the microwave hood combo and plug the power cord back into the wall outlet.

Replacing the cooktop light in your Kenmore Elite microwave hood combo

• Unplug the microwave hood combo power cord to disconnect electrical power.
• Remove the lens cover mounting screw then pull off the lens cover.
• Remove the light bulb from its socket.
• Install the new light bulb in the socket.
• Clean the lens cover then reinstall the lens cover and secure it with its mounting screw
• Plug the microwave hood combo power cord back into the wall outlet.