Kenmore 36350627000 refrigerator Parts

The exact cubic-foot capacity for your Kenmore 36350627000 is listed in the specifications section of the owner's manual. If you cannot access the spec page quickly, you can also confirm capacity from the model and serial rating label inside the fresh food compartment.

Fast ways to find the cubic feet

Use these options in order; they are the most reliable for this model.

• Check the specifications pages in the owner's manual
• Look for the rating plate (model and serial label) inside the refrigerator section (often on a side wall or ceiling area)
• If the label is hard to read, clean it gently and use a flashlight or phone camera zoom
• If you are measuring for fit, also confirm required installation clearances in the manual (capacity and exterior size are different)

What “cubic feet” means (and why it can be confusing)

“Cubic feet” is the refrigerator’s interior storage volume (fresh food plus freezer). It is not the same as the outside width, height, or depth, and it does not tell you how much usable shelf space you will have with bins and the ice maker installed.

Capacity vs. installation space (quick comparison)

Item	What it tells you	Where to confirm
Cubic feet (capacity)	Interior volume	Owner's manual specs or rating plate
Clearances	Space needed around the cabinet for airflow and doors	Owner's manual
Exterior dimensions	Fit through doors and into the opening	Owner's manual

Why it matters

Knowing the correct cubic-foot capacity helps when you are comparing refrigerators, choosing replacement shelves and bins, and planning food storage. For installation planning, the manual’s clearance guidance is just as important as the capacity.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 36350627000 are cooling problems, ice maker or water dispenser failures, leaks, unusual noises, and frost buildup. Many of these trace back to airflow restrictions, a clogged filter, or a defrost-system part that is not working correctly; check the owner's manual for model-specific checks.

Common problems and what to check first

• Not cooling or warm temperatures: make sure vents are not blocked and the condenser coils are clean (the manual recommends cleaning coils at least yearly).
• Ice maker not making ice: confirm the shutoff arm is down, the door closes fully, and the water supply valve is on.
• Slow water dispenser or small ice cubes: a clogged water filter is a top cause; replace the filter about every 6 months.
• Water leaking or puddles: check for a pinched water line, loose connections, or a clogged defrost drain.
• Noisy operation: listen for a fan noise (evaporator fan area) versus a buzzing at the back (water valve or compressor area).
• Frost buildup: often points to a defrost heater, defrost thermostat, or defrost timer issue.

Quick part-to-symptom guide (model 36350627000)

Symptom	Common related part	What it affects
Slow water flow, bad taste/odor	Refrigerator water filter MWFP	Water quality and dispenser/ice maker flow
Frost on back wall, warm fridge	Refrigerator defrost heater WR51X10029	Melts frost off the evaporator
Frost buildup, defrost not cycling	Refrigerator defrost timer WR9X489	Controls defrost intervals
Ice dispenser not dispensing	Refrigerator solenoid WR62X23154	Opens/closes dispenser door or mechanism

Why it matters

These symptoms usually get worse over time. For example, restricted airflow or heavy frost forces longer run times, which can lead to temperature swings and food spoilage. Replacing a clogged filter on schedule also helps protect the water inlet valve and ice maker from low-flow problems.

Tips that prevent repeat problems

• Replace the water filter on schedule (about every 6 months).
• Clean condenser coils at least once a year.
• Push the refrigerator straight in and out to avoid damaging the water line.
• After water line work, dispense water for a couple minutes to purge trapped air.

Last updated: February 2026

Most Kenmore refrigerators, including model 36350627000, typically last 12 to 15 years with normal household use. Consistent cleaning, good airflow around the cabinet, and fixing cooling or water issues early are the biggest factors that help you reach (or beat) that range.

What affects refrigerator lifespan most

A refrigerator’s life is usually determined by how hard the sealed system and fans have to work, plus how well the doors seal.

• Keep condenser areas clean so heat can dissipate properly
• Maintain steady temperatures (avoid frequent warm-ups from long door openings)
• Make sure doors close and seal fully (no gaps, no sagging)
• Address frost buildup early (defrost system problems strain cooling)
• Keep the unit level so doors align and close correctly
• Replace wear items on schedule (filters, bulbs, dispenser components)

Maintenance checklist we recommend

Use these habits to reduce compressor run time and prevent common failures.

• Vacuum dust from vents and accessible coils (where applicable)
• Leave space for ventilation behind and above the refrigerator
• Set typical temps: 37°F to 40°F fresh food; 0°F freezer
• Don’t overload shelves; allow air to circulate
• If equipped with a water filter, replace it about every 6 months

Common “end-of-life” symptoms vs. fixable issues

Some symptoms point to a simple part replacement; others suggest major cooling-system wear.

Symptom	Often fixable with parts/adjustment	More likely major wear
Warm fridge, freezer OK	Yes (airflow, fan, defrost)	Sometimes
Heavy frost on freezer back wall	Yes (defrost heater/thermostat/timer)	No
Water dispenser flow slows	Yes (filter or inlet valve)	No
Loud grinding or no airflow	Yes (evaporator fan motor)	No
Not cooling at all	Sometimes	Yes (sealed system/compressor)

Why it matters

When a refrigerator runs warmer than normal or has restricted airflow, the compressor and evaporator fan run longer. That extra run time increases wear and can shorten the overall lifespan.

Model-specific notes for 36350627000

Your 36350627000 manual calls out a replaceable filtration cartridge and recommends replacing it every six months (or sooner if water flow drops). Following those intervals helps protect the dispenser and ice maker water path from restriction.

• Reference the 36350627000 owner's manual for your model’s care, operating, and filter instructions
• If you need the filter used with this refrigerator’s filtration system, we list the refrigerator water filter MWFP

Last updated: February 2026

Kenmore model numbers are read left to right; the first three digits identify the manufacturer source, and the remaining digits narrow down the design series and specific variation. For your Kenmore refrigerator model 36350627000, the 363 prefix is the key identifier we use to match the correct parts list and documentation in the 36350627000 owner's manual.

Where to find the model number on a refrigerator

Most Kenmore side-by-side refrigerators list the model and serial on a rating label. Common locations include:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food section near the temperature controls
• Along the door frame (hinge side)
• Behind the toe grille or lower kickplate area
• On the back panel near the lower section

How the number is typically structured

Kenmore model numbers usually follow this pattern:

Section	Example	What it tells us
Manufacturer prefix	363	Who built the unit for Kenmore
Base model / platform	50627	Core design family
Variation / engineering digits	000	Feature and production variation

Why it matters when ordering parts

Using the full model number (all digits) prevents mismatches because small variations can change the correct fit for items like a water filter, ice maker parts, or defrost components.

• Use the complete model number, not just the first 3 digits
• Match the model number exactly as printed (including any leading zeros)
• Use the parts list for 36350627000 when selecting components
• Confirm the part description and placement before ordering

Quick example using a common part

If you are shopping for filtration parts, the manual for this model references the Kenmore filtration cartridge and replacement interval; you can also match the filter by part listing such as the refrigerator water filter MWFP when it applies to your configuration.

Why it matters

Kenmore used multiple manufacturers over the years; the prefix is the fastest way to route you to the right diagrams, part numbers, and repair instructions for your exact refrigerator.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 36350627000, the model number is printed on the appliance identification label (the same label that lists the serial number). On most units, you will find this label inside the fresh food compartment, typically along the side wall near the temperature controls.

Where to look first (fast checklist)

• Open the fresh food (refrigerator) door and look along the inner side walls
• Check near the temperature control housing at the top of the fresh food section
• Look around the crisper drawer frame area (label is often on the cabinet wall nearby)
• Check the door jamb area (the cabinet frame the door seals against)
• If you still do not see it, remove items from the top shelf area and re-check the upper corners

What the label usually includes

The ID label typically lists both the model number and serial number together. Use the model number exactly as shown when ordering parts or looking up diagrams.

Item on label	What it’s used for	Example format
Model number	Matching the correct parts list and diagrams	36350627000
Serial number	Identifying production details for service history	Letters and numbers

Why it matters

Kenmore side-by-side refrigerators can look similar across multiple model series, but parts like a water filter, door hinge, or ice maker components can vary by model. Using the exact model number helps us match the correct replacement parts and avoid returns.

Helpful tip for parts and maintenance

Once you confirm your model number, keep the care and feature locations handy in the owner's manual. It also covers common feature locations and setup details (such as clearances and leveling rollers) that can affect door closing and cooling performance.

Last updated: February 2026