CONFIRM THE PART FITS
Part Information
This defrost heater (part number WR51X10029) is for refrigerators.
Defrost heater WR51X10029 melts frost from the evaporator fins during the automatic defrost cycle.
Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $37.61 |12% OFF Phone Price : $42.61
- $36.07 |12% OFF Phone Price : $41.07
- $49.99
- $89.86 |5% OFF Phone Price : $94.86
- $176.24 |5% OFF Phone Price : $186.24
- $135.08 |7% OFF Phone Price : $145.08
- $12.76 |14% OFF Phone Price : $14.76
- $54.06 |8% OFF Phone Price : $59.06
- $10.55 |16% OFF Phone Price : $12.55
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #TFS28PPDABS GE side-by-side refrigerator | TFS28PPDABS | Freezer section |
Model #TFX30PBDAWW GE side-by-side refrigerator | TFX30PBDAWW | Freezer section |
Model #36358772894 Kenmore side-by-side refrigerator | 36358772894 | Freezer section |
Model #36359522994 Kenmore side-by-side refrigerator | 36359522994 | Freezer section |
Model #TFM28PFBEAA GE side-by-side refrigerator | TFM28PFBEAA | Freezer section |
Model #TPS24PPBEBS GE side-by-side refrigerator | TPS24PPBEBS | Freezer section |
Model #TFT30PRBEAA GE side-by-side refrigerator | TFT30PRBEAA | Freezer section |
Model #36358472896 Kenmore side-by-side refrigerator | 36358472896 | Freezer section |
Model #TFX30PPBECC GE side-by-side refrigerator | TFX30PPBECC | Freezer section |
Model #TPX24PPDAWW GE side-by-side refrigerator | TPX24PPDAWW | Freezer section |
Reviews
Almost the exact replacement, easy to install
Replaced the harness, almost the exact same harness, the wires were slightly shorter than the originals, did not make the install difficult, had to wire tie the wires to other wires because that were not long enough to go into the wiring clip that the originals went into.
Tbore, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not a difficult install
After you get past the point of thawing the ice on the coils it was a very simple install.
MrDarci, Nixa, MO
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour