Kenmore 79036933904 gas range Parts

A Kenmore gas range like model 79036933904 typically lasts 15 years with normal household use and basic maintenance. Keeping burners clean, using correct flame size, and addressing ignition or heating issues early helps you get the full expected lifespan.

Typical lifespan and what affects it

Most ranges reach their expected life when these conditions are consistent:

• Regular cleaning of burner heads, caps, and grates to prevent poor combustion
• Proper flame size (flame should not extend past the pan edge)
• Avoiding accessories that cause incomplete combustion (such as stove top grills on sealed burners)
• Prompt repair of common wear items (igniters, sensors, light bulbs)
• Correct installation and routine care as outlined in the owner's manual

Quick maintenance checklist (high impact)

These steps reduce strain on the oven burner system and surface burners:

• Wipe spills quickly so ports and igniter areas do not get clogged
• Confirm each surface burner lights fully, then adjust down from LITE
• Use flat-bottom pans sized to cover the burner area
• Keep the oven cavity and door area clean so heat and airflow stay consistent
• Replace a weak oven igniter if the oven takes a long time to light (common aging symptom)

Common “life-shortening” symptoms and likely fixes

Symptom	What it often points to	Example part for this model
Oven won’t ignite or takes 60+ seconds to light	Weak igniter	Frigidaire range oven burner igniter 5303935066
Oven temperature swings or bakes unevenly	Failing temperature sensor	Range oven temperature sensor 5304504897
Surface burner clicks but won’t light reliably	Ignition system issue	Range spark module 5304505695

Why it matters

A gas range can run for years past the average, but delayed ignition, uneven heating, or poor burner flame wastes fuel and increases wear on key components. Fixing small ignition and temperature-control problems early is usually the difference between a 10-year range and a 15-year range.

Last updated: February 2026

Kenmore model numbers are built in sections that identify who made the appliance and which design family it belongs to. For Kenmore gas ranges like model 79036933904, the prefix is the key piece we use to match the correct parts list and documentation in the owner's manual.

What the Kenmore model number sections mean

Most Kenmore model numbers follow a pattern like this:

• Prefix (first 3 digits): identifies the original manufacturer (for this range, 790)
• Core model digits (next group): identifies the base design series
• Suffix digits (last group): identifies feature or production variations within that series

Why the prefix matters for parts

The prefix helps ensure you get parts that fit your exact platform (burner system, oven controls, wiring harness routing, and gas valve style). Even small suffix changes can affect items like burner caps, igniters, or control panels.

Where to find the model and serial number on the range

For Kenmore 79036933904, the identification plate is typically located in one of these places:

• On the oven front frame behind the oven door (common location)
• On the drawer side frame (some versions)
• On a serial plate that also lists burner ratings and fuel/pressure information

We recommend recording both the model number and serial number before ordering parts or scheduling service.

Quick examples (how we use the number)

What you’re doing	What to use	Why it matters
Ordering replacement parts	Full model number (79036933904)	Ensures correct fit and compatibility
Checking fuel setup details	Serial plate info	Confirms gas type and regulator adjustment
Looking up operating features	Use and care information	Matches control functions and settings

Why it matters

Using the full Kenmore model number prevents mismatched parts and wasted time, especially on gas-range components where fit and fuel setup are critical.

Last updated: February 2026

Your Kenmore gas range model number is printed on the serial plate (model and serial tag). On Kenmore model 79036933904, that plate is typically on the oven front frame behind the oven door, or on the drawer side frame, depending on the exact configuration. See the installation guide for the official label locations.

Where to look on a Kenmore 79036933904

Check these common spots first:

• Open the oven door and look along the front frame (the face frame around the oven opening)
• Look behind the oven door on the oven front frame (some versions place the plate there)
• Pull out the bottom storage drawer and check the drawer side frame
• If the drawer is hard to remove, check the frame edges you can see with the drawer partially open
• Write down both the model and serial numbers exactly as shown

What the serial plate tells you (and why it matters)

The serial plate is more than a label. It helps us match the correct Kenmore gas range parts and specifications for your exact unit.

On the serial plate	Why you need it
Model number	Ensures the correct parts diagrams and compatible replacement parts
Serial number	Helps identify production details when parts vary by revision
Fuel and pressure info	Confirms how the range was set up from the factory

Tips for reading the label accurately

• Use a flashlight; the plate is often in a shadowed area
• Take a clear photo before copying it down
• Match every digit; Kenmore model numbers are easy to misread
• If the label is greasy, wipe gently with a damp cloth and mild soap, then dry

Why it matters

Using the exact model number prevents ordering the wrong igniter, burner parts, or control components for your range. Once you confirm the model, you can confidently choose parts that fit and function correctly.

Last updated: February 2026

Kenmore is a brand name sold by Sears; the Kenmore 790.3693 series (including model 79036933904) is commonly associated with Frigidaire/Electrolux-built ranges. For confirmation details tied to your exact unit, we recommend checking the identification information and documentation in the owner's manual.

How to confirm the manufacturer on your specific range

Use these quick checks on your Kenmore 79036933904 gas range:

• Look for the serial plate; it lists the model and serial number and is the best reference for identification.
• Compare the model format; 790. model prefixes are widely recognized as Frigidaire/Electrolux sourced.
• Check the parts used on the range; many replacement parts for this model cross to Frigidaire-style components.
• Match the manual part number and revision info to your paperwork for consistency.

What “made by” means for parts and repairs

Even when another manufacturer builds the appliance, Kenmore-branded models still use Kenmore model-based parts lookup. For repairs, the most important thing is matching parts to 79036933904, not the badge on the front.

Examples of common parts that fit this model

Repair symptom	Common part to check	Example part on this page
Oven will not heat or heats slowly	Oven igniter	Frigidaire range oven burner igniter 5303935066
Oven temperature seems inaccurate	Oven temperature sensor	Range oven temperature sensor 5304504897
Surface burners will not spark	Spark module	Range spark module 5304505695

Why it matters

Knowing who built the range helps when you are comparing design style and troubleshooting patterns, but the model number is what ensures correct fit for parts like an igniter, gas valve, or temperature sensor.

Last updated: February 2026