Frigidaire FGHS2355PF6B refrigerator Parts

On the Frigidaire FGHS2355PF6B, most “error” messages are cleared by correcting the condition (door ajar, high temp, ice chute/flapper jam) and then resetting the alarm from the dispenser controls. Use the steps in the FGHS2355PF6B owner's manual to match the message to the correct reset action.

Quick reset steps (most common)

• Close both doors firmly; make sure nothing is holding the door open.
• If “Door Ajar” is showing, press SET (some control versions use MUTE ALARM) to reset the alarm.
• If the display shows a flapper or ice chute alarm, remove the jammed ice, then press SET to reset.
• If “HIGH TEMP DETECTED” is showing, press MUTE ALARM to silence it; the indicator stays on until temperatures drop back below the alarm threshold.
• If you want to return the control panel to factory defaults, select DEFAULT SETTINGS and press and hold SET for 3 seconds.

What you are resetting (and what you are not)

Many Frigidaire side-by-side models use the display for alarms and status indicators, not a single universal “error code reset.” Here is what typically happens after you press the reset key:

Display message or indicator	What it means	What clears it
Door ajar	Door open too long	Close door, then press SET or MUTE ALARM
Flapper / chute alarm	Ice chute door held open by ice	Remove jam; alarm resets, then press SET if needed
High temp detected	Compartment temp too warm	Press MUTE ALARM to silence; light clears after temp recovers
Water filter / air filter status	Maintenance reminder	Press and hold the filter button for 3 seconds to reset status

Why it matters

Resetting the display without fixing the cause (warm temps, a door not sealing, or a dispenser jam) usually makes the message come back. Clearing the alarm after the issue is corrected helps you confirm the refrigerator is back to normal operation.

If the message relates to filters (common confusion)

If you are trying to clear a “Replace” reminder (not an error), reset the filter status after installing the correct filter:

• Water filter: press and hold the WATER FILTER button for 3 seconds
• Air filter: press and hold the AIR FILTER button for 3 seconds

For the correct replacement, use the refrigerator water filter ULTRAWF.

Last updated: February 2026

Yes. We look up Frigidaire parts by model number so you get parts that fit your exact refrigerator; for FGHS2355PF6B, matching by model helps you choose the correct water filter, air filter, door gasket, and dispenser parts without guessing.

How to look up parts by model number (FGHS2355PF6B)

• Find the model number on the refrigerator’s rating plate (often inside the fresh food compartment or on a side wall).
• Enter the full model number exactly as shown: FGHS2355PF6B.
• Use the parts diagrams to identify the section you need (dispenser, doors, shelves, cooling system).
• Match the part by description and ID, then confirm it matches your symptom.
• Cross-check replacement steps and access panels in the FGHS2355PF6B owner's manual.

Common FGHS2355PF6B parts customers search by model

Here are examples of model-matched parts for this refrigerator:

• Refrigerator water filter ULTRAWF for water and ice taste, flow, and filter-change intervals
• Refrigerator door air filter EAFCBF for odor control inside the fresh food compartment
• Refrigerator door gasket (gray) 241786015 for warm spots, moisture, or frost from air leaks
• Refrigerator temperature sensor 240597220 for temperature swings or inconsistent cooling

Quick “part type” guide

If your issue is	Part type to look up by model	Example from this model
Bad-tasting water or slow dispenser	Water filter	ULTRAWF
Odors in fresh food section	Air filter	EAFCBF
Frost, sweating, or poor sealing	Door gasket	241786015
Warm fridge or freezer, noisy airflow	Fan components	5308000010

Why it matters

Model-number lookup prevents fit and compatibility problems. Even within the same Frigidaire side-by-side series, filter housings, dispenser modules, and door parts can vary, so using FGHS2355PF6B keeps the repair accurate.

Last updated: February 2026

On the Frigidaire FGHS2355PF6B refrigerator, EF (often shown as SY EF or 5Y EF) points to a problem in the evaporator fan circuit, which can stop proper airflow and cause warm temperatures. We focus troubleshooting on the fan, wiring, and the main control.

What to check first (quick, safe steps)

• Power reset: unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Listen for the evaporator fan: it should run when the compressor is running and the freezer door switch is closed.
• Check for airflow blockage: make sure packages are not pressed against the rear freezer panel or vents.
• Look for frost buildup on the freezer back wall (a heavy frost pattern can indicate an airflow/defrost issue).
• Inspect door sealing: a poor seal can increase frost and restrict airflow over time.

Parts commonly involved

If the code returns after a reset, these are the most common repair paths:

What’s failing	What you’ll notice	Typical fix
Evaporator fan issue	Little or no airflow from freezer vents, warmer fresh food section	Inspect fan area; replace damaged fan components
Wiring/connector issue	Fan runs intermittently, code appears randomly	Reseat connectors; repair harness damage
Control problem	Fan has power issues even when not iced up	Diagnose control outputs; replace board if needed

For evaporator fan-related symptoms and testing steps, use how to fix your evaporator cooling fan.

Why it matters

The evaporator fan moves cold air through the freezer and into the fresh food compartment. When the fan circuit fails, temperatures rise, food can spoil faster, and frost can build up, which makes the problem worse.

Where to find model-specific guidance

Use the FGHS2355PF6B owner’s manual for control display behavior, alarm indicators, and “before you call” checks that match your exact refrigerator.

Last updated: February 2026

Your Frigidaire model number (FGHS2355PF6B) identifies the exact refrigerator design, feature set, and parts configuration so we can match the correct filters, shelves, electronics, and door components. It also helps identify finish and production variations that affect which replacement parts fit.

What you can learn from a Frigidaire model number

Model numbers are Frigidaire’s “ID tag” for your refrigerator. They commonly point to:

• Product type and series (for example, side-by-side vs. other styles)
• Feature package (dispenser, ice maker, filtration, control style)
• Finish or color code (often embedded as a letter in the model number)
• Engineering revision (small changes that can affect part fit)
• Parts compatibility (the most important reason to use the full model number)

For FGHS2355PF6B, using the full model number is the best way to ensure you get the right water filter, air filter, door gasket, and control parts.

Where to find the model number on the refrigerator

Check these common locations:

• Inside the fresh food compartment on a side wall
• Near the crisper area or lower liner
• On a label behind a drawer or bin
• On the cabinet frame near the door opening

If you are ordering parts, match the model number exactly, including all letters and numbers.

Why it matters when ordering parts

Even small model-number differences can change which parts fit. Here are common examples on this FGHS2355PF6B platform:

Item you are replacing	Why the model number matters	Example part for this model
Water filter	Filter type and housing style vary by series	Refrigerator water filter ULTRAWF
Air filter	Door filter style varies by design	Refrigerator door air filter EAFCBF
Door gasket	Door size and profile vary by revision	Refrigerator door gasket (gray) 241786015

Quick tip for faster troubleshooting

If your display is flashing or you see a performance message, the model number helps match the correct diagnostic info and control system version. Use the FGHS2355PF6B owner’s manual for model-specific operation and troubleshooting steps.

Why it matters

Using the exact model number prevents wrong-part returns, reduces downtime, and helps you target the right repair (for example, filtration, airflow, or dispenser issues) the first time.

Last updated: February 2026