Owner’s manual
Error Codes
Does KitchenAid make a 33 inch wide refrigerator?
Yes. KitchenAid makes 33-inch wide refrigerators in multiple configurations (commonly French door and bottom freezer). Your KitchenAid KSRJ25FXMS02 is a side-by-side model, and 33-inch width is a common “narrower standard” size used when cabinet space is limited.
We recommend measuring your opening and comparing it to the refrigerator’s published dimensions (including doors and handles) before you buy.
- Measure the cabinet opening width at the front and back
- Allow clearance for door swing and handle depth
- Check height clearance to the top cabinet or soffit
- Confirm depth clearance for doors to open fully
- Plan airflow space behind and above the refrigerator
Most 33-inch models are designed to fit a 33-inch cabinet opening, but the actual refrigerator width can vary slightly by model and trim.
| What you’re measuring | Typical range for “33-inch” class | Why it varies |
|---|---|---|
| Cabinet opening | 33 in | Standard kitchen cutout size |
| Refrigerator case width | About 32 3/4 to 33 in | Hinges, trim, leveling feet |
| Width with doors/handles | Wider than the case | Handle style and door design |
For model-specific dimension and clearance guidance, use the KSRJ25FXMS02 owner's manual.
A refrigerator that is even slightly too wide can bind in the opening, reduce airflow (hurting cooling performance), or prevent doors from opening far enough to slide out shelves and bins.
If your KSRJ25FXMS02 has a water dispenser or ice maker, keeping filtration current helps protect water flow and taste. Our step-by-step guide, how to replace the water filter in a KitchenAid refrigerator, walks through the process.
Last updated: January 2026
What is the most common problem with a KitchenAid refrigerator?
For KitchenAid side-by-side refrigerators like model KSRJ25FXMS02, the most common issues we see are ice maker and water dispenser problems and cooling complaints (warm fridge, frost buildup, or noisy operation). These symptoms often trace back to airflow, defrost, or water-supply components and basic maintenance.
- Ice maker stops making ice or makes small/hollow cubes
- Water dispenser flow is slow or tastes off
- Refrigerator section warms up while freezer seems OK
- Frost builds up on the freezer back wall
- Unusual fan noise or rattling from the freezer area
- Confirm temperatures: set freezer near 0°F and fresh food near 37°F (typical targets for most refrigerators).
- Replace the water filter if flow is slow or taste is off; a clogged filter can also reduce ice production. See refrigerator water filter EDR3RXD1.
- Listen for the evaporator fan in the freezer; if airflow is weak or noisy, cooling performance drops. (Related parts include refrigerator evaporator fan WPW10236142 and refrigerator evaporator fan blade WP2169142.)
- Check for defrost trouble: heavy frost usually points to a defrost system issue (heater, thermostat, or control). One common component is refrigerator defrost bi-metal thermostat WPW10225581.
- Inspect the water supply: kinked line, low house pressure, or a failing valve can cause weak dispensing and poor ice fill. A common part is refrigerator water inlet valve WPW10179146.
| Problem area | Typical symptom | Common next step |
|---|---|---|
| Water filter / water supply | Slow water, small cubes, no ice | Replace filter; purge air; verify supply |
| Evaporator fan / airflow | Warm fridge, uneven temps, noise | Check fan operation; clear ice obstruction |
| Defrost system | Frost buildup, warm fridge, fan hitting ice | Diagnose heater/thermostat/control |
| Controls / sensors | Temps swing, intermittent cooling | Check settings; diagnose control circuit |
Ice maker and cooling problems can look “random,” but they usually come from one system affecting another. For example, restricted airflow or frost buildup can warm the fresh-food section, and restricted water flow can reduce both dispensing and ice production.
- Use the KSRJ25FXMS02 manual for control settings, temperature guidance, and model-specific component locations.
- For step-by-step filter help, follow how to replace the water filter in a KitchenAid refrigerator.
Last updated: January 2026
How do I find the model number on my KSRJ25FXMS02?
The model number for your KitchenAid side-by-side refrigerator is printed on the appliance’s model and serial tag. On most KitchenAid side-by-side models like KSRJ25FXMS02, that tag is inside the fresh food (refrigerator) compartment along the side wall or near the top.
- Open the refrigerator (fresh food) door and check the left and right interior walls
- Look near the ceiling of the fresh food compartment, behind the top shelf area
- Check around the crisper drawer frame area (sometimes the tag is lower)
- If you do not see it, check the freezer compartment side wall
- Look for a label that says Model and Serial
The tag is usually a white or silver sticker or plate with multiple lines of text.
| You’ll see | What it means | Why you need it |
|---|---|---|
| Model number | Identifies the exact refrigerator version | Ensures diagrams and parts match your unit |
| Serial number | Identifies your specific build | Helps confirm production series for correct parts |
| Electrical ratings | Volts/amps | Useful for service and troubleshooting |
- Write the model number exactly as shown (letters and numbers)
- Take a clear photo of the tag before ordering parts
- If the label is worn, use a flashlight and view from an angle to make the print stand out
KitchenAid refrigerators often have similar-looking doors, shelves, and controls across multiple models. Using the exact model number (KSRJ25FXMS02) prevents ordering the wrong items such as a refrigerator water filter EDR3RXD1 or electronic control.
For model tag location details and parts identification, use the KSRJ25FXMS02 owner's manual.
Last updated: March 2026
