Kenmore Elite 79551083011 refrigerator Parts

Most Kenmore Elite refrigerators, including model 79551083011, typically last 10 to 15 years with normal household use and basic maintenance. Keeping airflow clear, doors sealing tightly, and temperatures stable helps the sealed system and compressor run less and last longer; see the 79551083011 use and care guide for care and operating tips.

Typical lifespan and what affects it

A refrigerator’s life is mostly determined by how hard the compressor has to work and how well the cabinet holds temperature.

• Maintenance: cleaning dust from condenser areas and keeping vents clear reduces run time.
• Door seal condition: a leaking gasket forces longer run cycles.
• Room temperature: hotter kitchens increase compressor run time.
• Usage habits: frequent door openings and warm food loads add heat.
• Power quality: repeated outages or surges can stress electronics.

What “normal” operation looks like

Your manual notes that modern refrigerators can run a lot, especially in warm conditions; at normal room temperatures, it’s common for the compressor to run about 40% to 80% of the time, and more when it’s hot or after loading groceries. That run time by itself does not mean the refrigerator is failing.

What you notice	Usually normal	Worth checking
Compressor runs longer after shopping	Yes	Only if it never cools down
Runs more in summer or warm rooms	Yes	If cabinet temps drift
Runs often with frequent door openings	Yes	If doors do not seal

Maintenance steps that extend life

• Vacuum dust from accessible condenser areas and grills.
• Keep the refrigerator level so doors close fully.
• Avoid blocking interior air vents with food packages.
• Set temperatures to recommended ranges (fresh food around 37°F, freezer around 0°F).
• Replace the water filter on schedule if you use the dispenser; a clogged filter can reduce flow and strain the water system (example: Kenmore refrigerator water filter 9990 5231JA2006E).

Why it matters

A refrigerator that runs less to maintain temperature experiences less wear on the compressor and sealed system, which are the most expensive components to repair.

Last updated: January 2026

The exact cubic-foot capacity for Kenmore Elite model 79551083011 is listed on the model’s specification information in the 79551083011 owner's manual. This Use & Care Guide covers multiple 795.5107 and 795.5108 variations, so we use the manual and the model/serial label inside the fresh food compartment to match the correct capacity.

How to find the capacity for model 79551083011

Use these quick checks to get the right number for your exact unit:

• Check the product label inside the refrigerator compartment (typically on the right-hand side) for the full model and serial information.
• Look in the specifications section of the 79551083011 owner's manual for “capacity” or “total capacity.”
• If your manual lists several similar models, match the exact model number and any suffixes shown on the label.
• If you are comparing refrigerators, remember that “total capacity” includes both fresh food and freezer sections.
• If you are planning a filter or water line setup, confirm your water system requirements in the manual as well.

Why the manual matters for this model

The Use & Care Guide shown for this Kenmore Elite side-by-side refrigerator explicitly covers multiple related models (795.5107 and 795.5108 series). That means capacity can vary by version even when the model numbers look similar, so the manual is the most reliable place to confirm the cubic feet for 79551083011.

Quick reference: what “cubic feet” means

Term	What it refers to	Why you care
Total capacity (cu. ft.)	Combined refrigerator + freezer interior volume	Helps you compare sizes and storage space
Refrigerator capacity	Fresh food section volume	Impacts shelf and drawer storage
Freezer capacity	Freezer section volume	Impacts ice storage and frozen food space

Related tip if you are checking size for installation

Capacity (cubic feet) is different from exterior dimensions. If you are measuring for fit, use the installation and leveling guidance in the 79551083011 owner's manual and measure your opening (width, height, depth) separately.

Why it matters: Knowing the correct cubic-foot capacity helps you compare replacement refrigerators, plan food storage, and confirm you are buying the right accessories for your exact Kenmore Elite 79551083011 configuration.

Last updated: January 2026

Kenmore Elite was introduced as a premium Kenmore line in the late 1990s (commonly cited as 1999). For your specific Kenmore Elite refrigerator model 79551083011, the most accurate way to identify its age is to use the serial number and the date-coding guidance in the 79551083011 owner's manual.

How to find the manufacture date for model 79551083011

We recommend using the serial number on the refrigerator’s rating label, then matching it to the date-code format described for your unit.

Common places to check for the rating label:

• Inside the fresh food compartment on a side wall
• Along the door frame when the door is open
• Behind the base grille area
• On the back exterior panel

What “came out” means (and why the serial number matters)

“Kenmore Elite” is a product line name, not a single release-year model. Kenmore Elite refrigerators were produced across many years and factories, so the model number alone does not reliably tell the exact year.

Quick comparison

What you’re trying to date	Best identifier to use	What it tells you
Kenmore Elite product line	Brand history	Approximate introduction timeframe
Your refrigerator (79551083011)	Serial number date code	Actual manufacture period
Your unit’s service history	Purchase/installation records	When it was put into use

Why it matters

Knowing the manufacture year helps us match the correct refrigerator parts (like a water inlet valve, thermistor, or control board), choose compatible upgrades, and troubleshoot issues more accurately.

If you’re also tracking filter replacement intervals, the Kenmore refrigerator water filter 9990 5231JA2006E is a common maintenance item for this model family.

Last updated: January 2026

Common problems on the Kenmore Elite 79551083011 side-by-side refrigerator include not cooling well, running too much, doors not closing completely, unusual noises or vibration, and ice or water issues (taste, odor, slow dispensing). Many fixes start with cleaning condenser coils, confirming door seal and leveling, and checking control settings in the 79551083011 owner's manual.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: dirty condenser coils, doors not sealing, blocked air vents, or a fan or sealed-system issue.
• Compressor runs a lot: warm room, frequent door openings, large food load, dirty coils, or doors not fully shut.
• Vibration or rattling: refrigerator not level or floor is uneven; leveling legs need adjustment.
• Doors will not close: unit not level, food packages blocking, or bins and shelves out of position.
• Bad-tasting or smelly ice: old ice, unwrapped foods, mineral-heavy water, or a filter that needs replacement.

Quick checks we recommend before replacing parts

1. Set expectations after power-up: cooling can take up to 24 hours after plugging in or major temperature changes.
2. Clean the condenser coils: dirty coils reduce heat transfer and make the compressor work harder.
3. Confirm doors seal and close: push doors firmly shut; reposition bins, shelves, and food packages.
4. Level the refrigerator: correct leveling reduces noise and helps doors close properly.
5. Address taste and odor: discard the first batches after installation, dump old ice, and replace the water filter if needed.

Parts that commonly relate to these issues

Symptom	Part to consider	What it affects
Bad taste or odor in water/ice	Kenmore refrigerator water filter 9990 5231JA2006E	Filtration for dispenser and icemaker
No water or weak water flow	Refrigerator water inlet valve	Water supply into the refrigerator
Ice dispensing problems	Auger motor	Moves ice through the dispenser

Why it matters

Most “big” refrigerator complaints are caused by airflow, door sealing, or maintenance issues. Fixing those first protects food temperatures, reduces energy use, and prevents the compressor from running longer than necessary.

Last updated: January 2026