Owner’s manual
Error Codes
How many cubic feet is my Kenmore Elite refrigerator?
Your Kenmore 79551026010 side-by-side refrigerator is typically in the 25 to 27 cubic feet range for this style and cabinet size. For the exact capacity rating for your specific unit, we recommend confirming it in the 79551026010 owner’s manual.
How to confirm the exact capacity on your model
We use the model-specific documentation first because capacity can vary by sub-variant and configuration.
- Check the specifications section in the 79551026010 owner’s manual
- Look for the model and capacity on the rating label (usually inside the fresh food compartment)
- Compare the model number on the label to your paperwork to ensure it matches 79551026010
- If you have adjustable bins or an in-door ice system, note that usable space can feel smaller than the rated cubic feet
Rated capacity vs usable space (what you will notice day to day)
| Measurement | What it means | What you will notice |
|---|---|---|
| Rated cubic feet | Manufacturer’s total interior volume | Used for comparing models |
| Usable storage space | Space left after shelves, bins, ice maker | What actually fits |
| Freezer vs fresh food split | How the total volume is divided | Impacts frozen food capacity |
Why it matters
Knowing the correct cubic feet helps when you are comparing replacement refrigerators, planning kitchen fit, and choosing accessories like storage bins and water filtration schedules.
Last updated: January 2026
What size is Kenmore refrigerator model 79551026010?
The Kenmore side-by-side refrigerator model 79551026010 is a full-size unit; most side-by-side refrigerators in this class are roughly 33 to 36 inches wide, 30 to 34 inches deep, and 66 to 70 inches tall. For the exact cabinet and door-swing dimensions for your unit, use the 79551026010 owner's manual.
How to get the exact measurements that matter
When we talk about “size,” we recommend confirming these measurements because they affect fit, airflow, and door clearance:
- Overall width (cabinet and doors)
- Overall height (to top of hinge cover)
- Overall depth (with handles, without handles, and with doors open)
- Required clearance (sides, top, and back for ventilation)
- Door swing clearance (space needed to fully open doors and drawers)
Quick sizing guide (typical ranges)
These ranges help you plan before you measure your kitchen opening.
| Measurement | Typical range for side-by-side refrigerators | Best way to confirm |
|---|---|---|
| Width | 33 to 36 in. | Measure across the widest point |
| Height | 66 to 70 in. | Measure floor to top hinge area |
| Depth | 30 to 34 in. | Measure with handles installed |
How to measure your refrigerator correctly
Use a tape measure and record to the nearest 1/8 inch.
- Measure width at the front (doors) and at the back (cabinet)
- Measure height from floor to the highest point (often the hinge cover)
- Measure depth from the wall to the front of the handle
- Check leveling legs; changing height slightly can affect door alignment
- Confirm you have room to pull the unit out for service and water line access
Why it matters
Accurate dimensions prevent installation problems like doors hitting walls, poor airflow that can reduce cooling performance, and difficulty connecting the water line for the ice maker and dispenser.
Last updated: January 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore model 79551026010 side-by-side refrigerators, we find the model and serial number on the identification label inside the fresh food (refrigerator) compartment, on the right-hand side wall. Use that label when ordering parts or scheduling service; it lists both numbers together.
How to find it quickly
- Open the refrigerator (fresh food) door.
- Look along the right interior wall of the refrigerator compartment.
- Check near the front edge where the door gasket seals.
- Use a flashlight if the label is in shadow.
- Write down both the model number and serial number exactly as shown.
What the label is used for
The model and serial label helps us match the correct Kenmore parts, diagrams, and troubleshooting steps for your exact build.
| You need | Why it matters | Example use |
|---|---|---|
| Model number | Identifies the design and parts list | Ordering a door gasket or water inlet valve |
| Serial number | Identifies production details | Confirming compatible revisions of a control board |
Why it matters
Many Kenmore refrigerators share similar styling, but internal components (like the dispenser system, icemaker, or control boards) can vary by model and production run. Using the label inside the refrigerator compartment prevents ordering the wrong part.
Helpful references
- See the location details in the 79551026010 owner's manual.
Last updated: January 2026
