Owner’s manual
Error Codes
How many cubic feet is my Kenmore Elite refrigerator?
Your Kenmore side-by-side refrigerator model 10657079601 is typically in the 25 to 27 cubic feet range for this style and model family. For the exact capacity rating for your specific unit, check the model specifications section in the 10657079601 owner's manual.
We recommend using the manual first because it lists the official specifications for your exact model.
- Look for a section labeled Specifications, Product data, or Capacity
- Check both total capacity and the split between refrigerator and freezer
- If your unit has a water filter or ice maker, those features do not change the rated cubic feet, but they can reduce usable space
- If the manual lists capacity in liters, convert to cubic feet (see table below)
| If the manual shows | That equals about |
|---|---|
| 700 L | 24.7 cu ft |
| 730 L | 25.8 cu ft |
| 760 L | 26.8 cu ft |
Knowing the cubic feet helps us match the right replacement parts and accessories (like shelves, bins, and water filters) and it also helps when comparing energy use and storage needs across Kenmore refrigerator models.
Last updated: January 2026
What are the most common issues with 10657079601?
The most common issues we see with the Kenmore 10657079601 side-by-side refrigerator involve ice and water dispensing problems, warming temperatures from airflow or defrost trouble, and door sealing or closing issues. Many of these symptoms trace back to a few serviceable parts and basic maintenance checks.
- No ice or small cubes: restricted water supply, a failing ice maker, or a weak inlet valve
- Water dispenser slow or not dispensing: clogged filter, frozen reservoir, or inlet valve issue
- Frost buildup on the back freezer wall: defrost system problem (heater or defrost thermostat)
- Fridge warm but freezer cold: evaporator fan not moving air, iced-over evaporator, or control issue
- Doors not closing well or warm air leaks: worn gasket, misaligned hinges, or a worn door cam
- Confirm the temperature settings and allow 24 hours after changes (typical targets: 0°F freezer, 37°F fresh food).
- Replace the water filter if flow is weak or taste is off; a clogged filter is a top cause of dispenser complaints.
- Look for frost patterns on the freezer back panel; heavy frost often signals a defrost failure.
- Listen for the evaporator fan in the freezer; it should run when the compressor is running and the door switch is closed.
- Inspect door seals for gaps, tears, or areas that do not grip paper when the door is closed.
| Symptom | Common part to check | What it does |
|---|---|---|
| No ice / slow fill | Refrigerator inlet valve W10408179 | Opens to send water to the ice maker and dispenser |
| No ice | Refrigerator ice maker 2198597 | Cycles and harvests ice cubes |
| Slow water / bad taste | Genuine Kenmore refrigerator water filter EDR3RXD1 | Filters water; restriction increases as it loads with sediment |
| Frost buildup | Refrigerator heater WP2323198 | Melts frost off the evaporator during defrost |
| Frost buildup | Refrigerator defrost bi-metal WPW10225581 | Senses evaporator temperature to control defrost |
Ice, water, and airflow problems can cascade: restricted water flow reduces ice production, and defrost or fan issues reduce cooling efficiency and can lead to food spoilage. Catching the early signs helps prevent bigger repairs.
For the correct diagnostic steps, wiring/connector locations, and access panels for Kenmore 10657079601, follow the troubleshooting and component location details in the 10657079601 owner's manual.
Last updated: March 2026
What is the code Sy Ef on a Kenmore refrigerator?
On Kenmore model 10657079601 side-by-side refrigerators, the SY EF code points to a freezer evaporator fan problem (the fan that moves cold air through the freezer and into the fresh food section). The most common causes are ice buildup blocking the fan, a failed fan motor, or a wiring/control issue.
- Listen for the fan: open the freezer door and press the door switch; you should hear the evaporator fan running.
- Look for frost or ice on the freezer back wall; heavy frost often means a defrost system issue that can stop the fan.
- Check airflow: weak airflow at freezer vents usually matches an evaporator fan fault.
- Power reset: unplug the refrigerator for 5 minutes, then restore power and watch for the code returning.
- Confirm control settings: make sure temperatures are near 0°F freezer and 37°F refrigerator as a baseline.
If the fan is noisy, not spinning, or intermittent, replacement is common. If the fan runs but frost keeps returning, the defrost system is the next place to look.
| Symptom | Most likely cause | Common repair direction |
|---|---|---|
| No fan sound, warm freezer | Failed fan motor or wiring | Test/replace fan motor, inspect harness |
| Fan hits ice, grinding noise | Ice buildup around fan | Defrost, then address defrost failure |
| Heavy frost on back wall | Defrost heater or bi-metal issue | Check heater and defrost thermostat |
| Temps drift, code returns | Control issue | Verify sensors/controls per manual |
Helpful model-matched parts to consider:
- Refrigerator evaporator fan motor WP2315549
- Refrigerator defrost heater WP2323198
- Refrigerator defrost bi-metal WPW10225581
The evaporator fan is what distributes cold air. When it fails (or gets blocked by ice), the freezer warms up, the refrigerator side often warms too, and food quality and ice production drop quickly.
Use the troubleshooting and temperature control sections in the 10657079601 owner's manual to match symptoms (noise, frost pattern, temperature behavior) to the right repair path.
Last updated: January 2026
