KitchenAid KFGG504KPS0 gas range Parts

Yes. KitchenAid makes gas ranges, and your KitchenAid KFGG504KPS0 is a gas range model. If you are shopping for parts or confirming compatibility, matching the full model number is the fastest way to ensure the correct fit and finish.

Check these common identifiers on KitchenAid gas ranges like model KFGG504KPS0:

• A gas supply line connection at the back of the range
• Surface burners that ignite with a spark (clicking) and a visible flame
• An oven burner that lights with an igniter (glow bar) instead of an electric bake element
• A rating label with the full model number (KFGG504KPS0)

If you are troubleshooting ignition or burner lighting, these are common gas-range components we see involved:

KitchenAid makes both gas and electric ranges, and parts are not interchangeable across fuel types. Using the exact model number KFGG504KPS0 helps us match the correct igniters, spark module, knobs, and gas components for safe, reliable operation.

Last updated: February 2026

If your KitchenAid gas range model KFGG504KPS0 oven is not heating, the most common cause is a weak or failed bake ignition system: the igniter may not glow hot enough to open the gas valve and light the burner. A failed spark/ignition control can also prevent ignition.

• Confirm the oven is set to BAKE (not BROIL) and the temperature is above room temp.
• Look through the oven bottom vents (if visible) for an igniter glow during preheat.
• If you smell gas but get no heat, stop and turn the oven off; ventilate the area.
• If the cooktop burners light normally but the oven does not, focus on the oven igniter/burner circuit.
• If nothing on the range responds, check the home breaker and outlet power.

For KFGG504KPS0, the bake ignition system is often serviced with the range oven igniter WPW10324262 or the range oven burner igniter WPW10333842. If you have widespread ignition problems (multiple burners clicking or not sparking correctly), the spark module (red) WPW10475149 is a common suspect.

• Power off the range at the breaker before inspecting wiring or parts.
• During a bake start, watch for igniter glow within about 30 to 90 seconds.
• If it glows but never lights, the igniter can be too weak even if it looks “on”.
• Inspect harness connections for heat damage; repair as needed (see how to repair broken or damaged wires video).
• If you use a meter, test components with the range unplugged (see how to use a multimeter to test electrical parts video).

A weak igniter can allow long preheat times, temperature swings, or no ignition at all. Fixing the ignition system restores safe, consistent burner lighting and proper oven temperature control.

Last updated: February 2026

On the KitchenAid gas range model KFGG504KPS0, a blank or dead display is usually caused by a power supply issue to the control, a loose connection at the console, or a failed electronic control board. Start with power checks, then inspect wiring and the control components.

• Confirm the range is plugged in firmly and the outlet has power.
• Reset the circuit breaker (or replace a blown fuse) and try again.
• If the display comes back briefly, heat or vibration may be affecting a weak connection.
• If the cooktop igniters click but the display is dead, the issue is typically in the console power/control path.
• If nothing works at all, focus on incoming power and wiring.

Turn off power at the breaker before removing any panels.

• Check for a loose ribbon cable or plug connection between the user interface area and the main control.
• Look for pinched wires, heat discoloration, or corrosion at connectors.
• If connections look good and power is present, the electronic control is the most likely failure point.

If you determine the control is not powering up or is unresponsive, the correct replacement for this model is the cntrl-maxwel W11088878.

The display is part of the range’s electronic control system; when it loses power or the control board fails, you can lose oven operation, timing functions, and error reporting. Fixing the root cause prevents repeat failures and protects wiring from overheating.

When you need to confirm power and continuity safely, follow the steps in how to use a multimeter to test electrical parts video.

Last updated: February 2026

A KitchenAid gas range like model KFGG504KPS0 typically lasts 13 to 15 years with normal household use. With consistent cleaning, correct burner operation, and timely replacement of wear parts (especially ignition parts), many ranges reach 15 to 20 years.

Most gas ranges age based on heat exposure, cooking frequency, and how hard the ignition and control system works.

• Heavy daily cooking shortens life more than occasional use
• Spills and boilovers accelerate corrosion and burner issues
• Weak ignition can strain gas valves and cause delayed lighting
• Overheating behind the console can stress electronics
• Prompt repairs prevent small failures from becoming major ones

On KFGG504KPS0, ignition and spark components are frequent “wear points.” If the oven or burners start lighting slowly, clicking constantly, or failing to ignite, replacing the failing part early helps extend overall range life.

These habits reduce stress on the igniter, spark system, and controls.

• Keep burner caps and ports clean and fully seated
• Wipe up spills quickly, especially sugary or acidic spills
• Avoid flooding the cooktop with cleaner or water
• Make sure the range stays level (prevents uneven cooking and door stress)
• Use cookware that matches burner size to reduce excess heat on surfaces

A gas range can run for many years, but ignition and control issues often show up before the cabinet or oven cavity wears out. Replacing a failing igniter or spark module early is usually the difference between a quick fix and ongoing no-heat or no-ignite problems.

Last updated: February 2026

A brief gas odor on your KitchenAid gas range model KFGG504KPS0 right as a burner or the oven ignites is normal and should fade within a few seconds. If the smell continues after ignition, or you smell gas when the range is off, treat it as a leak and stop using the range.

• Turn all burner knobs to OFF.
• Open windows and doors to ventilate the kitchen.
• Do not light matches, use lighters, or operate electrical switches.
• If the odor is strong or persistent, shut off the gas supply valve to the range.
• If you cannot quickly stop the odor, contact your gas supplier or a qualified technician.

In KFGG504KPS0 ranges, ongoing gas odor usually points to an ignition problem (gas flowing but not lighting quickly) or a gas connection issue.

• Weak oven ignition can delay lighting and let gas build up briefly (often tied to a failing igniter such as the range oven igniter WPW10324262).
• A burner that clicks but lights slowly can be related to the spark system (the spark module (red) WPW10475149 is one component in that circuit).
• Loose fittings or damaged lines can allow gas to escape (inspect visible connections; do not disassemble gas tubing yourself).

A short odor during ignition is expected, but a continuing smell means unburned gas may be present. Fixing delayed ignition protects your home and also helps the oven and surface burners heat more consistently.

Last updated: February 2026