GE GFE29HMDCES bottom-mount refrigerator Parts

For your GE GFE29HMDCES bottom-mount refrigerator, we recommend ordering replacement parts by matching the full model number and then selecting the exact part from the parts list for your unit; this helps ensure fit and compatibility before you check out through Sears PartsDirect.

• Confirm the model number on the rating label: GFE29HMDCES
• Identify the symptom (no ice, warm fridge, leaking water, etc.)
• Choose the matching part from the model’s parts list
• Compare the part ID and part name to what you need
• Order the part and keep your receipt for your records

If you are ordering for water, ice, or cooling issues, these are frequently used parts for GE GFE29HMDCES:

• Refrigerator water filter RPWFE for reduced water flow or filter replacement
• Refrigerator ice maker assembly WR30X28731 for no ice or poor ice production
• Refrigerator water inlet valve WR57X10098 for dispenser or ice maker water supply problems
• Refrigerator evaporator fan motor WR60X25858 for warm temperatures or weak airflow

Your GFE29HMDCES owner's manual includes maintenance guidance such as water filter replacement intervals (commonly every 6 months, or sooner if flow drops). Using the manual steps helps avoid ordering a part when a reset or maintenance step solves the issue.

GE refrigerators often use multiple versions of similar components (filters, valves, controls) across close model families. Ordering by the exact model number and matching the part ID reduces returns and gets your refrigerator back to proper cooling, ice production, and water dispensing faster.

Last updated: February 2026

The five main parts that make a refrigerator cool are the compressor, condenser, expansion device, evaporator, and a temperature-sensing control (often a thermistor or temperature sensor). In your GE GFE29HMDCES bottom-mount refrigerator, these parts work together to move refrigerant and maintain stable fresh food and freezer temperatures.

These are the components that create and control cooling:

• Compressor: pumps refrigerant through the sealed system and drives the cooling cycle.
• Condenser: releases heat from the refrigerant (often through a condenser coil) so it can condense back to a liquid.
• Expansion device: drops refrigerant pressure so it can get cold before entering the evaporator.
• Evaporator: absorbs heat from inside the refrigerator as refrigerant boils/evaporates.
• Temperature sensor/control: monitors temperature and signals the control board to run the compressor and fans as needed (example part: refrigerator temperature sensor WR55X10025).

Many customers also include these because they directly affect performance and everyday use:

• Evaporator fan (moves cold air through compartments)
• Defrost system (heater and thermostat/sensor to prevent frost buildup)
• Door gaskets and door alignment hardware (prevents warm air leaks)
• Water filter and inlet valve (for dispenser and ice maker models)

When you know the “big 5,” troubleshooting gets faster: cooling complaints usually trace back to airflow (fan), defrost issues (ice blocking the evaporator), or temperature sensing/control problems. For model-specific safety and service guidance, follow the GFE29HMDCES owner's manual.

If you need to order replacement parts for GE GFE29HMDCES, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

For a GE GFE29HMDCES bottom-mount refrigerator, control board replacement typically runs about $250 to $600 total: roughly $150 to $400+ for the board plus $100 to $200+ labor if you hire service. DIY replacement can reduce the total by avoiding labor.

Control board cost varies by which board is failing (main control board vs. user interface) and whether the repair is DIY or professional.

• Part cost: commonly $150 to $400+ for many GE refrigerator boards
• Labor cost: commonly $100 to $200+ (service call plus installation)
• Total typical range: $250 to $600
• Extra costs to plan for: diagnostic fee, taxes, and shipping (if applicable)

This model has multiple electronic components that can be involved in “control board” type problems. Two common examples are:

• Main control board: Refrigerator main board assembly WR55X46805
• Display/control panel electronics: Refrigerator user interface WR55X11144

If you are pricing the repair, matching the symptom to the correct part is the biggest factor in avoiding an unnecessary board purchase.

Before replacing a board, we recommend these quick checks because they often point to a simpler fix (or confirm the board is the likely cause):

• Verify the outlet has power and the cord is firmly seated
• Check for loose connectors at the board and user interface (after unplugging)
• Look for cooling symptoms that suggest airflow/defrost issues instead of a board
• If your model shows a fault code, use GE refrigerator error codes to narrow the failure
• Review access and handling notes in the owner's manual before opening panels

A “control board” diagnosis is expensive compared to many refrigerator parts. Spending a few minutes confirming symptoms can prevent replacing the wrong component and can reduce repeat service calls.

If you need to order the correct board for your GFE29HMDCES, use the parts list for this model first; for broader model-based searching, use Sears PartsDirect.

Last updated: February 2026

The most common problem we see with GE refrigerators like model GFE29HMDCES is a cooling complaint (warm fresh food section, soft ice cream, or temperature swings). The usual causes are restricted airflow, dirty condenser coils, or a failing evaporator fan that cannot move cold air through the compartments; check the GFE29HMDCES owner's manual for model-specific checks and settings.

• Fresh food warm, freezer OK: airflow blockage, damper/duct issue, or evaporator fan problem
• Both sections warm: condenser coils dirty, compressor not running correctly, or control issue
• Frost buildup on freezer back wall: defrost system problem (heater, sensor, or thermostat)
• Temps fluctuate: temperature sensor or main control board issue
• Ice maker or dispenser acts up: filter restriction, air in the water line, or inlet valve issue

1. Confirm doors close fully and vents are not blocked by food packages.
2. Set temperatures to normal targets and give the unit 24 hours to stabilize.
3. Clean condenser coils and make sure the grille area has good airflow.
4. Listen for the evaporator fan (a steady fan sound when the doors are closed).
5. If water flow is slow, replace the filter and purge the dispenser.

If basic checks point to a component problem, these parts are common fixes for GFE29HMDCES:

Cooling problems usually get worse over time: restricted airflow and dirty coils force longer run times, which can lead to food spoilage and heavier frost buildup. Catching the cause early helps restore stable temperatures and protects the sealed system.

For broader part lookup by model number, we also support searching on Sears PartsDirect.

Last updated: February 2026