Whirlpool GS395LEHS5 gas range Parts

For a Whirlpool gas range like model GS395LEHS5, the model number is printed on a rating label attached to the range body. On many Whirlpool freestanding ranges, you can find it by pulling out the bottom warming drawer and looking on the frame behind it.

Check these common label locations (in order):

• Behind the warming drawer or storage drawer (on the frame or side rail)
• On the oven door frame area (visible when you open the oven door)
• On the lower front frame behind the broiler door (if your range has one)
• On the back panel of the range (you may need a flashlight)

1. Make sure the range is cool.
2. Pull the warming drawer straight out until it stops.
3. Lift the front slightly and continue pulling to remove the drawer.
4. Look for a white or silver sticker on the frame behind the drawer.

The label usually includes both a model and serial number. Record both so we can match the correct Whirlpool parts.

Whirlpool ranges often have similar-looking versions with different igniters, door glass, or burner components. Using the exact model number helps ensure you get the right replacement part the first time.

If you are still not seeing the label, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Yes. Whirlpool is a solid, widely trusted brand for gas stoves; for the Whirlpool GS395LEHS5 gas range, you can expect dependable everyday cooking performance and good long-term parts support when normal wear items need replacement.

A good gas range brand consistently delivers safe ignition, stable burner flames, and reliable oven heat over years of use. With Whirlpool ranges like GS395LEHS5, we typically see strong ownership value because common service parts remain available.

• Burner ignition consistency: burners click and light quickly without repeated attempts
• Even flame pattern: steady blue flame (minor yellow tips can happen with air or cleaning issues)
• Oven lighting and heat stability: bake and broil ignite reliably and maintain temperature
• Door seal and heat retention: gasket seals well so the oven holds heat efficiently
• Parts availability: key wear parts are replaceable instead of replacing the whole range

If performance drops, it is often a single part, not the whole stove.

Brand quality shows up most after a few years: consistent cooking results, fewer nuisance failures, and the ability to repair practical items (igniters, gaskets, valves) without replacing the entire gas range.

• Turn off power at the breaker before accessing wiring or ignition parts
• Shut off the gas supply if you smell gas; ventilate the area
• Use the correct OEM part for your exact model number GS395LEHS5

Last updated: February 2026

A Whirlpool gas range like model GS395LEHS5 typically lasts about 15 years with normal household use and basic maintenance. Keeping burners clean, ensuring steady ignition, and addressing small issues early helps you reach (and often exceed) that expected lifespan.

Most gas ranges fall into a similar life range, but real-world results depend on usage and upkeep.

• Average life expectancy: ~15 years
• Heavy use (daily high-heat cooking): often shorter
• Light to moderate use: often longer
• Hard water, grease buildup, and poor ventilation: can shorten life
• Prompt repairs (ignition, gas flow, door seal): extend life

These steps reduce strain on key components like igniters, burner heads, and the oven cavity seal.

• Clean spillovers quickly so ports do not clog and flames stay even.
• Keep burner heads seated correctly after cleaning.
• Avoid slamming the oven door; it stresses hinges and can compromise sealing.
• Watch for delayed ignition or repeated clicking; fix ignition issues early.
• Replace worn seals to keep heat in and reduce long bake times.

When a range feels “old,” it is often one or two serviceable parts causing the trouble.

• Weak or no oven ignition: consider the range oven igniter WP8054129.
• Uneven flames or poor burner performance: inspect/clean the burner head WP4455981.
• Heat leaking around the oven door: replace the door gasket W11542153.

A gas range that lights reliably and seals heat properly cooks more evenly, preheats faster, and puts less stress on components. That directly improves performance and helps your Whirlpool GS395LEHS5 reach its full service life.

Last updated: February 2026

For a Whirlpool GS395LEHS5 gas range, we typically recommend a 3/4-inch rigid gas supply pipe to the range location; on LP (propane) systems, 1/2-inch minimum piping is commonly used. The correct size also depends on total BTU load and the length of the run.

• Natural gas: 3/4-inch rigid pipe to the range location
• LP (propane): 1/2-inch minimum piping or tubing is commonly acceptable
• Longer runs: upsizing is often needed to prevent low gas flow
• Final connection: many installs use a flexible connector sized to match the appliance and shutoff valve
• Shutoff valve: install an accessible manual shutoff valve in the same room as the range

Gas line sizing is based on distance and total demand (range plus any other appliances on the same branch). Use this quick guide to decide what to verify before installation:

If the supply line is undersized, the oven burner and surface burners can light slowly, produce weak flames, or struggle to maintain temperature. Correct sizing helps the igniter, regulator, and burner valves deliver steady heat.

If you are troubleshooting poor ignition or inconsistent flame (after confirming proper gas supply), these model-matched parts are commonly involved:

• Range oven igniter WP8054129
• Surface igniter WP8523793
• Regulator WPW10293048
• Burner valve WP9757218

Last updated: February 2026

When the cooktop burners work but the oven on your Whirlpool GS395LEHS5 does not, the most common cause is a failed oven ignition system (especially the oven igniter) or a problem in the oven gas safety circuit. Start with basic gas and power checks, then focus on the bake/broil ignition.

• Confirm the range has power (clock/display on, interior light works).
• Make sure the gas shutoff valve is fully open.
• Try both BAKE and BROIL; note whether you hear clicking or see any glow.
• If the oven is in a self-clean lock condition, let it cool fully and retry.
• If you smell gas without ignition, stop and ventilate; turn the oven off.

• Range oven igniter WP8054129 (commonly used for broil ignition on many Whirlpool ranges)
• Spark module WPW10331686 (if multiple ignition functions are failing)
• Regulator WPW10293048 (if gas flow issues affect oven operation)

The oven uses a separate ignition and safety setup than the surface burners. A cooktop burner can light even when an oven igniter is too weak to open the oven gas valve reliably, so the stovetop working does not rule out an oven ignition failure.

Last updated: February 2026