Kenmore 79046582502 electric range Parts

To reset your Kenmore electric range model 79046582502, turn the range off and cycle power at the home breaker for a few minutes, then restore power and re-set the clock. This clears many temporary electronic control glitches and restores normal operation.

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off on the control.
• Switch the range circuit OFF at the breaker (or remove the fuse).
• Wait 3 to 5 minutes.
• Switch the breaker ON.
• Set the clock and test Bake and Broil functions per the 79046582502 installation guide.

A power reset helps when the electronic oven control is “stuck” after a power flicker or keypad confusion.

Use the code to guide the next step. Many Kenmore ranges in the 790 family use specific fault-code sets.

• Write down the exact code (letters and numbers).
• Reset power once; if the code returns, troubleshoot the code.
• Use our Kenmore 790 range 4-digit error codes reference to match the code to likely causes.

If the range powers up but heating is inconsistent, a reset will not correct a failed sensor or heater.

• If baking temperatures swing widely, check the frigidaire range oven temperature sensor 316217002.
• If the oven light does not work (but the range has power), check the bulb and socket.
• If a surface element cuts in and out, inspect the element prongs and receptacle for heat damage.

A proper reset is a fast, safe first step that clears control-board logic issues without disassembling the range. If the problem returns immediately, the repeat symptom points to a specific circuit (sensor, element, wiring, or control).

Last updated: January 2026

On the Kenmore electric range model 79046582502, the F11 code typically points to a stuck or shorted key (touchpad) or a problem in the oven control circuit. The range may beep continuously or act like a button is being pressed even when you are not touching the control.

• Press CANCEL/OFF once; if the beeping stops briefly but returns, the keypad is likely sticking or shorting.
• Power reset: turn the range breaker OFF for 5 minutes, then turn it back ON.
• If the code returns immediately after power is restored, focus on the keypad/control area.
• If the control panel is wet or greasy, let it dry completely and clean with a lightly damp cloth (no spray directly on the panel).
• If the oven was recently cleaned, make sure no cleaner residue is bridging keys.

F11 is most often triggered when the control senses an invalid key signal for too long. Common causes include:

• A stuck membrane key (physical wear, contamination, or moisture)
• Corrosion or debris causing an electrical short at the keypad ribbon connection
• A failing electronic oven control (EOC) or a poor connection between the keypad and control

On this model, the keypad is often integrated with the overlay/control area. If the keypad itself is the issue, these parts are commonly checked or replaced:

If your overlay is worn, bubbled, or unresponsive, replacing the range control overlay 316419353 is a common fix.

A stuck-key condition can make the oven turn on unexpectedly, lock you out of settings, or keep the alarm beeping. Addressing F11 quickly helps prevent nuisance shutdowns and protects the control from repeated fault cycling.

For model-specific control features and reset guidance, follow the troubleshooting section in the 79046582502 owner's manual. You can also match the exact fault format using the Kenmore 790 range 4-digit error codes reference.

Last updated: January 2026

A Kenmore electric range like model 79046582502 typically lasts 13 to 15 years with normal home use. Regular cleaning, correct installation, and replacing wear items (like an oven light bulb) on time helps you reach that lifespan; see the 79046582502 owner's manual for care guidance.

• Heat stress from frequent high-temp baking, broiling, or self-clean cycles
• Power quality (loose connections or voltage issues can damage controls)
• Door seal condition (heat leaks make the oven work harder)
• Spills and corrosion on elements, drip pans, and wiring
• Ventilation and leveling (poor airflow can overheat components)

• Wipe up spills quickly; baked-on spills trap heat and can damage finishes.
• Avoid slamming the oven door; it stresses hinges and the door seal.
• Use cookware that matches the burner size to reduce element cycling.
• Replace wear items promptly, such as the range oven light bulb 316538904 if it burns out.
• Follow installation and leveling steps in the installation guide to prevent overheating and vibration issues.

Knowing the expected 13 to 15 year lifespan helps you decide whether to repair or replace. If your 79046582502 is within that range, replacing common parts (elements, sensor, light bulb, door seal) often restores reliable cooking for years.

Last updated: March 2026