Kenmore Elite 79045013101 electric range Parts

To reset your Kenmore Elite electric range model 79045013101, restore the control to a known good state by turning power off at the breaker for about 1 minute, then turning it back on and re-setting the clock. For model-specific control behavior, follow the 79045013101 owner's manual.

Quick reset options (try in this order)

• Power reset (most reliable): Switch the range circuit breaker OFF for about 60 seconds, then ON.
• Control panel reset: If the keypad is unresponsive after a power reset, cancel any active cooking mode, then reprogram the clock and settings.
• After a self-clean: If the oven is still hot, wait for it to cool; the door lock and controls can stay limited until temperatures drop.

What to check after the reset

After power is restored, we recommend verifying basic operation the same way installers do:

• Set Bake to 350°F and confirm the lower element heats.
• Set Broil and confirm the upper element heats.
• If your model has convection, start Conv. Bake/Roast and confirm the fan runs (it typically stops when the door opens).
• Confirm all knobs and controls return to OFF when you are done.

Symptom after reset	Most common cause	What to do next
Display is blank	No power to range	Check breaker, cord connection, and house power
Oven heats wrong	Temperature sensing issue	Test/replace the range oven temperature sensor 5304504897
Keypad works but oven will not heat	Control or wiring issue	Inspect connections; check harness and terminals

Why it matters

A reset clears minor control glitches and restores normal operation after a power interruption. If heating performance is still off after a reset, the temperature sensor and wiring are the first places we check because they directly affect bake and broil accuracy.

Last updated: February 2026

Yes. The Kenmore Elite 79045013101 is part of Kenmore’s higher-end “Elite” lineup, which typically sits above standard Kenmore models and focuses on upgraded cooking features, styling, and overall performance for an electric range. For model-specific features and options, use the installation guide.

What “high end” means for this Kenmore Elite range

In the Kenmore family, “Elite” generally indicates a more premium tier. In practical terms, that usually shows up as better feature sets and more refined design compared with entry-level ranges.

Common “Elite” expectations include:

• More advanced oven functions (often convection-related)
• More precise temperature control and cooking modes
• Higher-quality fit and finish (control panel, door trim, handle)
• More robust electrical and safety design (proper grounding, anti-tip setup)

Quick checklist: is it the right tier for you?

Use this as a simple way to decide if “Elite” matches what you want.

If you care most about...	Kenmore Elite 79045013101 is typically a good fit when...
Baking consistency	You want steadier oven temperatures and better control
Features	You use specialized modes beyond basic bake and broil
Appearance	You want a more premium look and control layout
Long-term serviceability	You prefer a model with strong parts support and documentation

Why installation details matter on higher-end slide-in ranges

Premium slide-in ranges depend on correct fit, leveling, and electrical connection to perform correctly. The installation instructions for this style of range call out key requirements like a 30-inch minimum opening, a flat and level countertop around the cutout, and anti-tip bracket engagement.

Before you judge performance, we recommend:

• Confirm the range is level (front-to-back and side-to-side)
• Verify the anti-tip bracket is installed and engaged
• Make sure the power cord is not pinched and the terminal block connections are secure
• Match the cabinet and countertop cutout width to the specified opening

Parts that support “premium performance” when symptoms show up

If cooking results seem off, these model-compatible parts are common fixes:

• Range oven temperature sensor 5304504897 (helps correct inaccurate oven temps)
• Range convection fan assembly 318398203 (supports convection airflow)

Why it matters

“High end” is not only about looks; it is about consistent cooking results, safer installation, and features you will actually use. Correct setup and the right replacement parts keep the range performing like it should.

Last updated: February 2026

On the Kenmore Elite 79045013101 electric range, the model number is printed on the serial plate. You can find that plate on the oven front frame behind the oven door on some versions, or behind the drawer on others; check the installation guide.

Where to look on the range

Check these common serial plate locations for model 79045013101:

• Open the oven door; look on the front frame around the oven opening
• Pull out the lower drawer (storage or warmer drawer); look behind the drawer area
• Use a flashlight and look for a sticker or metal plate labeled “Model” and “Serial”
• Write down the full model number and serial number exactly as shown

Quick steps to find it fast

1. Turn the range controls to OFF.
2. Open the oven door and inspect the front frame.
3. If you do not see the plate, slide out the bottom drawer and look behind it.
4. Record the model and serial number for parts lookup and service.

What the serial plate typically shows

Item on plate	What it’s used for
Model number	Matching the correct Kenmore parts diagrams and replacement parts
Serial number	Identifying the production run for service and compatibility
Lot number/letter (if listed)	Helps narrow down exact configuration

Why it matters

Kenmore ranges can have small design changes within the same series. Using the exact model number from the serial plate helps us match the right parts (like a control panel, wire harness, or oven temperature sensor) to your specific 79045013101.

Last updated: March 2026