Kenmore Elite 10651183113 refrigerator Parts

For Kenmore Elite model 10651183113, the capacity is typically listed in the 25 to 30 cubic feet range for a standard-depth side-by-side refrigerator. For the exact cubic-foot rating for your specific unit, we recommend confirming it in the 10651183113 owner's manual.

How to confirm the exact capacity

Use one of these quick checks to get the precise cubic-foot number for your refrigerator:

• Look in the specifications section of the 10651183113 owner's manual
• Check the model and serial tag inside the fresh food compartment (often on a side wall)
• Search the product description on your original sales receipt or product listing
• Compare your interior layout (shelf and bin configuration) to the manual diagrams

What “cubic feet” means (and what it does not)

Cubic feet is the total interior storage volume, not the usable space after shelves, bins, and the ice maker are installed.

Measurement	What it tells you	What it helps with
Total capacity (cu. ft.)	Overall interior volume	Comparing refrigerator sizes
Fresh food capacity	Refrigerator-side volume	Meal planning and grocery storage
Freezer capacity	Freezer-side volume	Frozen food storage planning

Why it matters

Knowing the correct cubic-foot capacity helps us match the right accessories and maintenance parts (like an air filter) and helps you compare performance expectations for cooling and storage.

If you are also tracking odors or airflow issues, replacing the refrigerator air filter W10311524 is a common maintenance step on this Kenmore Elite platform.

Last updated: January 2026

On a Kenmore Elite refrigerator, we find the model number on the appliance’s rating label, most often inside the fresh food compartment on a side wall or inside the door area. For model 10651183113, the label is typically in an easy-to-see spot once you open the doors; confirm the exact location using the 10651183113 owner's manual.

Common places to check first

• Inside the refrigerator compartment on the left or right interior wall
• On the ceiling of the fresh food compartment near the light housing
• Inside the door opening (door jamb area) near the hinges
• Behind the lower crisper drawers (on the back wall)
• On or behind the front kick plate (toe grille)

What to look for on the label

The rating label usually includes several identifiers. Use the model number to match parts and diagrams.

Label item	What it’s used for	Example format
Model number	Correct parts lookup and diagrams	106.51183113 or 10651183113
Serial number	Production date tracking and service history	Letters and numbers
Electrical ratings	Verifying power requirements	Volts/amps

Tips to avoid mix-ups when ordering parts

• Copy the model number exactly as printed (include dots if shown).
• If the label shows a 3-digit prefix (like 106), keep it; it identifies the manufacturing source.
• Match the model number before choosing common replacements like an ice maker or valve.
• If you’re troubleshooting dispenser or ice issues, use the model number to confirm the correct refrigerator ice maker WPW10251076 or refrigerator water inlet valve WPW10341320.

Why it matters

Kenmore model numbers can look similar, and a single digit difference can change the correct door bins, control boards, ice maker style, or water inlet valve. Using the exact model number prevents wrong-part returns and repeat repairs.

Last updated: January 2026

On Kenmore Elite model 10651183113, an ice maker usually stops making ice because water is not reaching the ice maker, the freezer is not cold enough to freeze properly, or the ice maker is switched off or jammed. We recommend checking the water supply first, then airflow and temperature, then the ice maker components.

Quick checks (fastest fixes first)

• Confirm the ice maker is turned ON (bail arm up means OFF on many units).
• Make sure the freezer is set cold enough; most side-by-sides make ice best around 0°F.
• Verify the household shutoff valve is fully open and the supply line is not kinked.
• Look for a frozen or blocked fill tube where water enters the ice maker.
• Dump old cubes and clear any clumps that can stall the ejector.

Water supply problems (most common)

If the dispenser water flow is weak or the ice maker never refills, focus on the inlet side.

• Check for a pinched water line behind the refrigerator.
• If you have good house water pressure but no fill to the ice maker, the dual water valve can be the cause.
• For this model, common valve options include refrigerator water inlet valve WPW10341320 and refrigerator water inlet valve WPW10238100.

What to look for

Symptom	Most likely area	What we do next
No ice and no water at dispenser	House supply, filter, valve	Confirm pressure and valve operation
Water dispenses but no ice	Ice maker fill circuit, fill tube, valve ice side	Check fill tube for freezing, test valve
Small cubes or hollow cubes	Low water flow	Check for restrictions and pressure

Cooling and airflow checks

Even with perfect water flow, the ice maker will stop if the freezer cannot hold temperature.

• Listen for the evaporator fan; poor airflow can warm the ice maker area.
• Check for heavy frost on the back freezer panel (defrost issue).
• If you suspect a defrost problem, a common component is the refrigerator defrost bi-metal WPW10225581.

Why it matters

Ice production depends on three things working together: steady water flow, freezer temperature, and airflow across the evaporator. Fixing the root cause prevents repeat clogs, slow ice, and warm-freezer symptoms.

Model-specific reference

Use the 10651183113 owner’s manual for the exact ice maker on/off method, temperature recommendations, and any diagnostic steps specific to your control setup.

Last updated: January 2026

Yes. For Kenmore Elite model 10651183113, the most reliable reset is a hard reset: unplug the refrigerator (or switch off the breaker) for about 5 minutes, then restore power and allow 24 hours for temperatures to fully stabilize. See the 10651183113 owner's manual for any model-specific button resets.

Reset options (from easiest to most targeted)

• Hard reset (recommended): Unplug for ~5 minutes, then plug back in.
• Breaker reset: Turn the refrigerator circuit breaker off for ~5 minutes, then back on.
• Control panel reset (feature-specific): Some functions (like filter indicators) reset by pressing and holding a specific key combination.
• After a power outage: Restore power, confirm the display is responsive, then recheck temperature settings.

What to check right after a reset

• Confirm the interior lights and display come back on.
• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Make sure air vents are not blocked by food packages.
• Listen for the evaporator fan and compressor to run within a few minutes.
• If you have dispenser issues, verify the dispenser is not locked and the door is fully closed.

Common symptoms and what a reset can (and cannot) fix

Symptom	Reset may help	Usually needs troubleshooting/parts
Display frozen or unresponsive	Yes	If it returns quickly, suspect control issues
Filter light won’t clear	Sometimes	Use the manual’s filter reset steps
Not cooling after reset	Rarely	Often airflow, defrost, fan, or sealed system
Ice maker not making ice	Sometimes	Water supply, valve, ice maker module

If water dispensing or ice production is inconsistent after a reset, a failing inlet valve is a common cause; for this model, see refrigerator water inlet valve WPW10341320 as a matched replacement part.

Why it matters

A reset clears minor control glitches, but it does not correct mechanical problems like frost buildup, weak airflow, or water supply restrictions. Using the correct reset method helps you avoid unnecessary part replacement and gets you back to stable temperatures faster.

Last updated: January 2026