How many cubic feet is my Kenmore refrigerator by model number?
Your Kenmore side-by-side refrigerator model 10650264990 has its exact capacity (cubic feet) listed on the model and serial number label inside the fresh food compartment; that label is the most accurate way to confirm the correct spec for your specific unit.
Where to find the cubic feet rating (fastest methods)
- Check the model and serial number label on the inside wall of the refrigerator compartment.
- Look in the specifications section of the 10650264990 owner's manual.
- If the label is hard to read, write down the full model number and serial number first, then compare to the manual specs.
What the label typically shows
Most Kenmore refrigerators list key specs together on the rating plate. You will usually see:
- Model number and serial number
- Electrical rating information
- Refrigerant and system information
- Capacity listed as total, or broken out as refrigerator and freezer cubic feet
Why the model number alone is not always enough
Kenmore model numbers can share a similar prefix (for example, many start with 106), but capacity can vary by configuration and production variation. The rating plate and the 10650264990 owner's manual match the specs to your exact build.
Quick comparison: best ways to confirm capacity
| Method | Accuracy | What you need |
|---|---|---|
| Rating plate inside fridge | Highest | Flashlight, model and serial label access |
| Owner's manual specs | High | Model number 10650264990 |
| Estimating by interior measurements | Medium | Tape measure and time |
Why it matters
Knowing the correct cubic feet helps when you are comparing replacement shelves and bins, planning food storage, or troubleshooting cooling performance expectations for a side-by-side refrigerator.
If you need replacement parts while you are checking specs, we list model-matched parts for 10650264990 on this page, and you can also search by model number on Sears PartsDirect.
Last updated: February 2026
How to read Kenmore model numbers?
Kenmore model numbers are read left to right: the first three digits identify the manufacturer series (for example, 106 is a Whirlpool-built Kenmore), and the remaining digits identify the specific design and feature variations. For model 10650264990, the 106 prefix is the key identifier.
Where to find the model number on this refrigerator
On Kenmore side-by-side refrigerators like 10650264990, the model and serial number label is typically located on the inside wall of the refrigerator compartment. We recommend recording the full model and serial number for parts lookup and service reference in your owner's manual.
Quick checklist
- Open the fresh food (refrigerator) door
- Look along the inside side walls (often upper area)
- Write down the full model number and serial number
- Keep the numbers with your purchase date for future reference
How to interpret the number (simple breakdown)
Here is a practical way to read most Kenmore model numbers.
| Section | Example from 10650264990 | What it tells you |
|---|---|---|
| Manufacturer prefix | 106 | Who built the unit (Whirlpool-built Kenmore) |
| Model/feature digits | 50264990 | The specific platform, configuration, and feature set |
Why it matters for parts and troubleshooting
Using the full model number prevents ordering the wrong part when similar Kenmore refrigerators use different door bins, water system parts, or ice maker components.
Examples of parts that can vary by model
- Ice maker design and mounting style (see ice maker assembly - refrigerator ice maker by whirlpool 4317943)
- Water inlet valve style and electrical connector (see refrigerator inlet valve W10408179)
- Water filter housing and tubing routing (see refrigerator water filter housing WP2186443)
- Door gasket profile and color
- Dispenser components and control panel layout
Ordering tip
When you search parts, always enter the complete model number 10650264990 first; then match the part by name and ID from the parts list, or search by model on Sears PartsDirect.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common Kenmore refrigerator problems are warm temperatures (airflow or defrost issues), water leaks, ice maker or dispenser trouble, and unusual noises. On Kenmore model 10650264990, many fixes start with basic care steps in the 10650264990 owner's manual and checking a few high-failure parts.
Most common symptoms and what usually causes them
- Not cooling or weak cooling: dirty condenser coils, blocked vents, evaporator fan or defrost system problems
- Water under the refrigerator: defrost drain issues, water line leaks, or dispenser drip
- Ice maker not making ice: water supply problem, inlet valve issue, ice maker failure
- Water dispenser slow or dripping: clogged filter, air in lines after filter change, or valve issues
- Noisy operation: normal operating sounds, dirty coils making the compressor work harder, or airflow restrictions
Quick checks we recommend first (fast, no parts guessing)
- Confirm doors close and seal fully; poor sealing can cause long run times and temperature swings.
- Clean condenser coils; dirty coils reduce heat transfer and make the motor work harder.
- Give it time after changes; after installation or major adjustments, allow 24 hours to cool completely.
- For dispenser drips: hold the glass under the chute 2 to 3 seconds after releasing the lever.
- For slow water flow: remove the filter temporarily and test flow; if flow improves, replace the filter.
Parts that commonly solve these problems on model 10650264990
| Problem area | What fails most often | Example part on this model |
|---|---|---|
| Ice maker not producing ice | ice maker module or assembly | Ice maker assembly - refrigerator ice maker by whirlpool 4317943 |
| No water to ice maker/dispenser | water inlet valve not opening fully | Refrigerator inlet valve W10408179 |
| Defrost-related cooling issues | defrost thermostat (bi-metal) not closing | Refrigerator defrost bi-metal WPW10225581 |
| Dispenser light out | bulb burned out | Dispenser bulb WP22002263 |
Why it matters
Catching airflow, sealing, and water-supply problems early helps prevent heavy frost buildup, long compressor run times, and repeat ice maker or dispenser failures. Routine cleaning and correct filter use also keep water flow steady.
If you need to order parts for Kenmore 10650264990, use the parts list for this model or search by model number on Sears PartsDirect.
Last updated: February 2026





