Kenmore 59675519400 refrigerator Parts

For Kenmore refrigerator model 59675519400, the fastest way to identify the correct water filter is to use the full model number from the ID tag inside the fresh food compartment, then match it in the parts list or the filter section of the 59675519400 owner's manual. This prevents buying a filter that will not fit or seal.

• Find the model/serial tag inside the refrigerator (usually on a side wall or near the crisper area).
• Confirm the model number is 59675519400 (use all digits).
• Check the filter location on your unit (inside fresh food compartment, base grille, or rear housing).
• Look up the filter by model number in the parts list or manual.
• If your refrigerator has low water flow, verify your home water pressure before blaming the filter.

This Kenmore refrigerator is designed to run with 35 to 100 PSI water pressure; 35 PSI minimum is recommended for refrigerators with water filters. Low pressure can cause slow dispensing and poor ice production.

• Make sure the old filter is fully removed (some styles twist and pull).
• Inspect the filter head for cracks or debris.
• If you recently installed a saddle valve, replace it with a proper shutoff valve (saddle valves can restrict flow).
• After any water-line work, monitor for leaks for several hours.

Using the correct filter for 59675519400 protects the filter housing seal, helps maintain proper water flow, and reduces the chance of leaks or weak ice production caused by restriction or low pressure.

Last updated: January 2026

On Kenmore refrigerator model 59675519400, the bottom area is commonly called the machine compartment (or compressor compartment). It houses key cooling components like the compressor and condenser area, and it often sits behind a lower rear cover and above a drain pan.

The machine compartment is where the refrigerator rejects heat and powers the sealed cooling system.

• Compressor (the pump that moves refrigerant)
• Condenser coil area (releases heat)
• Condenser fan area (on many models)
• Electrical start components and wiring
• Drain pan (catches defrost water for evaporation)

For model-specific cabinet clearances and access notes, use the 59675519400 owner's manual.

Knowing the correct name helps when ordering parts, following troubleshooting steps, or checking airflow clearance. For example, the manual calls out leaving space behind the machine compartment cover for proper air circulation.

If you are diagnosing a no-cool or clicking issue, these model-matched parts are commonly involved:

• Refrigerator compressor W10160407
• Refrigerator overload release W10613606

Last updated: January 2026

For Kenmore refrigerator model 59675519400, the cost to replace a shelf depends on the exact shelf assembly you need (glass shelf, slide-out shelf, or a frame/rail). We price it by the specific part number; once you identify the correct shelf part, you can see the exact current price.

Use the model’s parts diagram to identify the shelf by location (upper fresh food shelf, crisper cover, door bin, etc.), then match the part number to the listing.

• Find the shelf section in the diagrams (fresh food shelves, crisper area, or door storage)
• Match the shelf style and trim color to the diagram callout
• Confirm whether you need the full shelf or only a support/rail
• Use the part number to check the current price and availability
• Compare the cost of a complete assembly vs. individual pieces

For shelf removal and reinstallation steps (including spillproof shelf handling and crisper top removal), follow the 59675519400 owner’s manual.

If you are actually replacing the crisper cover frame component (not the glass shelf itself), one related model-matched part is the refrigerator crisper drawer shelf frame WP67003854.

Using the correct shelf part for Kenmore model 59675519400 keeps airflow and storage stable. A mismatched shelf can sit unevenly, crack again, or interfere with door closing and temperature consistency.

Last updated: January 2026