GE PZS22MSKPHSS refrigerator Parts

The most common problem we see with GE refrigerators like model PZS22MSKPHSS is a cooling complaint (warm fresh food section, soft ice, or temperature swings). The usual causes are restricted airflow, dirty condenser coils, or a weak evaporator fan that cannot move cold air properly.

Most common symptoms customers report

• Fresh food section too warm but freezer seems OK
• Freezer temperature fluctuates, ice cream gets soft
• Loud humming or rattling from the freezer area (fan noise)
• Frost buildup on the back wall of the freezer
• Ice maker slows down or stops making ice

Quick checks that fix many “not cooling” calls

1. Check airflow: Make sure vents inside both compartments are not blocked by food packages.
2. Clean the condenser area: Dust buildup reduces heat removal and causes poor cooling.
3. Listen for the evaporator fan: When the compressor is running, you should typically hear a steady fan sound from the freezer side.
4. Look for frost patterns: Heavy frost often points to a defrost system problem.
5. Confirm door sealing: A leaking gasket lets warm, moist air in and drives frost and temperature issues.

Parts that commonly relate to cooling problems on PZS22MSKPHSS

Problem pattern	Common suspect	Example part for this model
Warm temps, fan noisy or not running	Evaporator fan motor	Motor dc evap fan asm WR60X10307
Frost buildup, poor airflow	Defrost heater	Refrigerator defrost heater WR51X10055
Temps inaccurate or erratic	Temperature sensor	GE profile refrigerator temperature sensor WR55X10025

Why it matters

Cooling issues are the root cause behind many other complaints, including food spoilage, excess frost, and ice maker performance problems. Restoring proper airflow and heat removal usually stabilizes temperatures quickly.

For dispenser and ice maker related complaints (freezing, clogs, slow ice), our GE-specific DIY help is a good next step: how to disassemble the ice and water dispenser on a GE refrigerator. If you need to order parts beyond the list for PZS22MSKPHSS, search by model number on Sears PartsDirect.

Last updated: February 2026

To reset the ice maker in your GE PZS22MSKPHSS side-by-side refrigerator, we recommend a simple power reset: turn the ice maker off (or unplug the refrigerator) for about 1 minute, then restore power and allow up to 24 hours for normal ice production to resume.

Quick reset steps (safe and effective)

• Turn the ice maker switch to OFF (or unplug the refrigerator).
• Wait 60 seconds.
• Turn the ice maker back ON (or plug the refrigerator back in).
• Confirm the freezer is set to 0°F to 5°F.
• Dump old ice and make sure the bin seats fully.
• Wait 3 to 24 hours for the first full batch, depending on temperature and usage.

If it still will not make ice

Most “no ice” complaints are not a control reset issue; they are temperature, water supply, or a stuck mechanism.

Check these common causes

• Freezer too warm: If the freezer is above 5°F, the ice maker may pause.
• Water supply issue: Kinked line, closed shutoff valve, or low house water pressure.
• Clogged filter: A restricted filter can slow or stop fill.
• Frozen fill tube: Ice blockage prevents water from entering the mold.
• Ice maker mechanism failure: The module can stop mid-cycle.

Parts that commonly solve “no ice” on this model

If troubleshooting points to a failed component, these are common replacements for GE PZS22MSKPHSS:

Symptom	Most likely part to check	What it does
No water entering ice maker	Refrigerator water inlet valve WR57X30890	Opens to send water to the ice maker and dispenser
Slow fill or weak dispenser flow	GE refrigerator water filter XWFE	Filters water; restriction reduces flow
Ice maker dead or inconsistent cycling	Mech ice mak WR30X10093	Harvests ice and controls the ice-making cycle

Why it matters

A reset only clears a temporary stall. If the freezer temperature, water inlet valve, or water filter is the real problem, the ice maker will stop again until the underlying cause is fixed.

For step-by-step GE-specific guidance, we also recommend our DIY article: common refrigerator ice maker problems and solutions. If you need to order parts beyond the ones listed for this model, search by model number on Sears PartsDirect.

Last updated: February 2026

GE side-by-side refrigerators are a solid choice for everyday use because they typically deliver reliable cooling, easy access to both fresh food and freezer sections, and convenient dispenser features. For your GE PZS22MSKPHSS, long-term satisfaction usually comes down to keeping airflow clear, changing the water filter on schedule, and addressing ice and water issues early.

What “good” usually means for a side-by-side

A good side-by-side refrigerator balances consistent temperatures, usable storage, and low-maintenance operation.

• Temperature stability: Keeps fresh food near 37°F and freezer near 0°F.
• Organization: Adjustable shelves and door bins help fit tall items.
• Ice and water convenience: In-door dispensing is practical but needs routine care.
• Noise level: Fans and the ice maker can be noticeable during normal cycling.
• Serviceability: Common wear items (filters, valves, sensors) are replaceable.

Common strengths and common complaints (and what to do)

Area	What owners often like	What can cause frustration	Practical fix/maintenance
Cooling	Even temps, good food preservation	Warm spots from blocked vents	Keep vents clear; avoid overpacking
Ice maker	Convenient, steady production	Slow/noisy ice, clumping	Dump old ice; check fill and chute door
Water dispenser	Filtered water on demand	Slow flow, odd taste	Replace filter; purge air after changes
Frost control	Automatic defrost	Frost buildup if airflow is restricted	Check door seal; don’t block returns

Parts that often solve the most common “not so good” moments

If performance is slipping, these model-compatible parts are frequently involved:

• Slow water flow or no ice: refrigerator water inlet valve WR57X30890
• Bad taste/odor or reduced flow: GE refrigerator water filter XWFE
• Temperature swings or odd readings: GE profile refrigerator temperature sensor WR55X10025
• Frost buildup and warm freezer: refrigerator defrost heater WR51X10055
• Ice chute not sealing (frost, leaks, clumping): refrigerator dispenser ice chute door kit WR17X11653

For ordering, use the parts list for GE PZS22MSKPHSS on this page, or search by model number on Sears PartsDirect.

Why it matters

Side-by-side refrigerators depend on steady airflow and a healthy ice and water system. Small issues like a restricted vent, a worn chute door, or a partially clogged filter can make an otherwise “good” refrigerator feel unreliable.

Last updated: February 2026

GE AutoFill pitchers are typically a removable, refrigerator-specific accessory; the exact capacity and physical dimensions depend on the pitcher design used with that dispenser system. For GE model PZS22MSKPHSS, we match dispenser and water-system parts by model so you can identify what your refrigerator actually uses.

What to check on your refrigerator first

Before shopping by “AutoFill pitcher,” confirm what water system you have on the PZS22MSKPHSS.

• Look for a removable pitcher docked in the door or dispenser area
• Check whether you have a standard water dispenser only (no pitcher)
• Identify the filter type installed in the filter housing
• Note whether water dispenses normally from the door

How to identify the correct water components by model

On a side-by-side like the GE PZS22MSKPHSS, water delivery is usually built around the filter, inlet valve, and reservoir. If your goal is better flow or better-tasting water, these parts are the ones that matter most.

• Start with the filter: GE refrigerator water filter XWFE
• If flow is weak or intermittent, check the valve: refrigerator water inlet valve WR57X30890
• If water is slow after sitting, inspect the tank: refrigerator water reservoir assembly WR17X11440

Capacity conversions (for any pitcher you measure)

If you measure your pitcher by filling it and want quick conversions:

Ounces	Cups	Quarts	Liters
48 oz	6	1.5	1.4
60 oz	7.5	1.9	1.8
64 oz	8	2.0	1.9

Why it matters

Pitcher size affects how often you refill, but dispenser performance is controlled by filtration and water supply. A restricted filter or a weak inlet valve can make any pitcher seem like it “fills wrong” even when the pitcher is fine.

You can order replacement parts for your GE PZS22MSKPHSS from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026