Kenmore 10657024602 side-by-side refrigerator Parts

For Kenmore model 10657024602, the most reliable way to get cubic feet is to look up the capacity in the specifications section of the owner's manual. Model numbers can hint at size, but they are not a consistent, accurate “capacity code” across Kenmore refrigerators.

Fast ways to find the cubic feet (best to least reliable)

• Check the specifications in the owner's manual for model 10657024602.
• Look for the rating plate (model and serial tag) inside the fresh food compartment or freezer; many units list capacity or key specs there.
• Measure interior space and calculate an estimate (useful if the label is missing).
• Use the model number to confirm you are viewing the correct parts and documentation for 10657024602.

How to estimate cubic feet if you must

If you cannot access the specs, you can estimate capacity from interior measurements.

1. Measure usable interior dimensions (in inches): width, depth, height.
2. Multiply: width x depth x height = cubic inches.
3. Convert to cubic feet: cubic inches ÷ 1728 = cubic feet.

Quick conversion table

What you have	What to do	Result
Interior inches (W x D x H)	Multiply to get cubic inches	Total cubic inches
Cubic inches	Divide by 1728	Approx. cubic feet

Why model numbers are not a dependable capacity lookup

Kenmore model numbers (including the 106 prefix family) identify a design series and configuration, but the remaining digits do not consistently map to a single published cubic-foot value. The same “pattern” can appear across different trims and revisions.

Related maintenance tip (helps performance)

If you are checking capacity because storage seems tight due to poor cooling or ice buildup, confirm airflow and defrost performance. Common service parts for this model include the refrigerator evaporator fan motor WP2315549 and the refrigerator defrost heater WP2323198.

Last updated: February 2026

On a Kenmore refrigerator, the SY EF code points to a problem in the evaporator fan circuit (the fan that moves cold air through the refrigerator and freezer). On model 10657024602, this typically means the fan is not running correctly, is blocked by ice, or the control is not sensing the fan signal.

What to check first (fast, no parts)

• Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• Listen for the evaporator fan: with the doors closed, you should normally hear a steady fan sound from the freezer side.
• Look for frost or ice buildup on the freezer back wall; heavy frost often indicates an airflow or defrost issue.
• Check door sealing: a leaking gasket can cause excess frost that interferes with the fan.
• Confirm vents are not blocked by food packages; blocked vents reduce airflow and can trigger fan-related errors.

Likely causes and the most common fixes

SY EF is most often caused by one of these conditions:

Likely cause	What you may notice	Typical fix
Ice blocking the evaporator fan	Buzzing, rubbing noise, weak cooling	Defrost the freezer, correct the cause of icing
Failed evaporator fan motor	No fan sound, warm refrigerator section	Replace the fan motor
Wiring/connection issue	Intermittent error, fan cuts in and out	Inspect harness and connectors
Defrost system problem	Heavy frost returns quickly	Diagnose defrost heater/thermostat/control

If you need the replacement fan motor for this model, use the exact part listed for Kenmore 10657024602: refrigerator evaporator fan motor WP2315549.

Why it matters

The evaporator fan is what distributes cold air. When it stops or gets blocked, the freezer may still feel cold near the evaporator, but the refrigerator side often warms up, food spoils faster, and frost can build up quickly.

Helpful reference

For model-specific component locations and access steps, use the 10657024602 owner's manual. If you are ordering parts beyond the ones shown here, search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657024602, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment. Check the label first before ordering parts or using troubleshooting steps in the 10657024602 owner's manual.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door and look along the cabinet walls near the front edge.
• Check the side wall around the crisper drawer area.
• Look near the top interior wall by the upper shelves.
• If you do not see it in the refrigerator section, check the freezer compartment side walls.
• Write down the model number and serial number exactly as shown.

What the label helps you do

Having the correct model number lets us match the right Kenmore parts and diagrams for your exact configuration (ice maker, water filter base grille style, door color, and shelving layout).

Common tasks that depend on the exact model

• Choosing the correct refrigerator water filter and cap
• Matching an ice maker assembly
• Identifying the correct water inlet valve for dispenser and ice maker
• Confirming door gasket style and color

Parts that often require an exact model match

What you are replacing	Example part for this model	Why the model number matters
Water filter	Genuine Kenmore refrigerator water filter EDR3RXD1	Filter fit and base grille housing vary by design
Ice maker	Refrigerator ice maker 2198597	Mounting and wiring can differ
Water inlet valve	Refrigerator inlet valve W10408179	Correct ports and electrical connector must match

Why it matters

Using the model number from the label prevents ordering the wrong part and helps us use the correct Kenmore 106-series troubleshooting and maintenance information. If you are ordering beyond the parts list for this model, search by model number on Sears PartsDirect.

Last updated: February 2026

Water leaking from the bottom of your Kenmore side-by-side refrigerator 10657024602 usually comes from defrost water backing up (a clogged or frozen defrost drain) or a leak in the dispenser or ice maker water supply. Start with the defrost drain because it commonly overflows to the floor.

Quick checks (fastest way to narrow it down)

• Unplug the refrigerator before removing panels or working near wiring.
• Check the freezer floor for a thin ice sheet or standing water (points to a frozen drain).
• Look under the unit for an overfilled drain pan.
• Inspect the water line behind the refrigerator for kinks, cracks, or rubbing.
• If the puddle appears after dispensing water, note that 1 to 2 drops after dispensing is normal.

Fix the most common cause: clogged or frozen defrost drain

During defrost, meltwater should run through the drain to the drain pan. When the drain hole or tube is blocked by ice or debris, water backs up inside the cabinet and leaks out at the bottom.

• Thaw ice in the drain trough using warm water (not boiling).
• Clear the drain hole and tube with a flexible brush or pipe cleaner.
• Pour a small amount of warm water into the drain to confirm it flows freely.

If the leak is tied to the water system (dispenser or ice maker)

The use and care information for this model notes water filter issues can affect flow; a clogged or misinstalled filter can contribute to dispenser problems.

Where you see water	Most likely source	What to do first
Freezer floor then onto kitchen floor	Defrost drain	Thaw and clear the drain
Drips at dispenser area	Filter or valve seep	Flush system, check filter seating
Water behind refrigerator	Supply line or inlet valve	Inspect line, fittings, valve

Relevant parts for this model include the refrigerator inlet valve W10408179 and the refrigerator water filter EDR3RXD1.

Why it matters

Stopping the leak prevents ice buildup, airflow restrictions that hurt cooling, and damage to flooring and cabinets.

For model-specific access and safety steps, follow the 10657024602 owner’s manual. To order parts, use the parts list for your model or search by model number on Sears PartsDirect.

Last updated: February 2026