Kenmore 10658536700 side-by-side refrigerator Parts

For your Kenmore 10658536700 side-by-side refrigerator, the most reliable way to confirm cubic feet is to read the rating plate inside the fresh food compartment; it lists the refrigerator’s total volume (capacity) in cubic feet or liters. Use the 10658536700 owner's manual to help locate the label.

Where to find the cubic feet (capacity) label

Look for a model and serial rating plate (a sticker or metal tag) in one of these common spots:

• On an inside side wall of the refrigerator (fresh food) section
• Behind or beside the crisper drawers
• Near the ceiling of the fresh food compartment
• Along the door frame area (visible when the door is open)

If the label is missing: calculate cubic feet from interior measurements

If the rating plate is damaged or unreadable, we use a quick volume calculation.

• Measure interior height, width, and depth in inches (ignore door bins and curved corners)
• Multiply: H x W x D = cubic inches
• Divide by 1,728 to convert cubic inches to cubic feet
• Round to the nearest tenth for a practical estimate

Quick reference table

What you have	What to do	What you get
Rating plate “Total volume” or “Cu. Ft.”	Read the number directly	Exact capacity for your unit
Interior measurements (inches)	(H x W x D) ÷ 1,728	Close estimate
Liters on the label	Liters ÷ 28.3	Cubic feet

Why it matters

Knowing cubic feet helps us match the right refrigerator water filter, shelves, and storage bins, and it also helps when comparing replacement parts and organizing airflow space for better cooling performance.

Parts that often get matched by model (not by cubic feet)

Even if you do not know the capacity, ordering by model number 10658536700 is the most accurate approach. Common examples include:

• Genuine Kenmore refrigerator water filter EDR3RXD1
• Refrigerator inlet valve W10408179
• Refrigerator ice maker WPW10190965

You can order replacement parts from the parts list for model 10658536700, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; your Kenmore 10658536700 falls in that common size range. For the exact cabinet width and required clearances for your specific unit, use the measurements and spacing guidance in the 10658536700 owner's manual.

Typical width ranges (what you can expect)

Side-by-side refrigerators are built in a few common widths; the exact width depends on capacity and whether the unit is standard-depth or counter-depth.

• Common overall width: 32 to 36 inches
• Most common “standard” size: about 33 inches or 36 inches
• Counter-depth models: often near 36 inches, but shallower front-to-back
• Door swing space matters: you need extra room beyond the cabinet width

Don’t forget clearance; it changes the real space you need

Even if you know the cabinet width, installation space must include ventilation and door-swing clearance. Our manual guidance for this style of refrigerator calls for:

• 1/2 inch space on each side and at the top for ventilation
• 2 inches minimum on the hinge side when next to a fixed wall (so doors can swing open)
• Extra space at the back if you have an ice maker water line

Quick clearance checklist

What you’re measuring	What to include	Why it matters
Cabinet width	Refrigerator body only	Fits between cabinets/walls
“Fits in opening” width	Cabinet width + side clearances	Prevents overheating and rubbing
Door swing space	Extra room near a wall	Lets bins and drawers open fully

How to measure your refrigerator width accurately

Use a tape measure and check more than one spot.

• Measure across the front cabinet (not the doors/handles)
• Measure at the top and bottom (floors can be uneven)
• If you are fitting into cabinetry, measure the opening width in 3 places
• Plan for the 1/2 inch ventilation space on both sides

Why it matters

Width affects more than “will it fit.” Proper spacing helps airflow around the condenser area, prevents door alignment issues, and reduces the chance of doors hitting a wall or not opening far enough to remove shelves and bins.

If you are also planning water and ice hookups, you can order common water-system parts for this model, such as the refrigerator inlet valve W10408179, from the parts list for 10658536700 or search by model on Sears PartsDirect.

Last updated: February 2026

You can find the model number for your Kenmore side-by-side refrigerator on the model and serial tag, which is typically inside the fresh food (refrigerator) compartment on a side wall near the crisper drawers. For Kenmore model 10658536700, the exact tag location and how it’s labeled is shown in the owner's manual.

Common places to check on a Kenmore side-by-side

Look in these spots first (use a flashlight and wipe dust or condensation off the label):

• Inside the refrigerator section on the left or right wall near the crisper drawers
• On the ceiling of the refrigerator compartment near the light housing
• Behind the lower toe grille (kick plate) at the front
• On the hinge-side door frame (open the door and check the frame edge)
• Inside the freezer compartment on a side wall (less common, but possible)

What the tag looks like (and what to write down)

The tag usually lists both a model number and a serial number. Record both before ordering parts.

What to capture	Example format	Why it matters
Model number	106.58536700 or 10658536700	Ensures parts match your exact design
Serial number	Letters and numbers	Helps confirm production range for some parts
Type/ratings	Voltage, amps	Useful for electrical troubleshooting

Why it matters

Kenmore model numbers (especially the 106 prefix family) can look very similar, but small design changes affect parts like the refrigerator ice maker, water filter cap, or inlet valve. Using the exact model number helps us match the correct replacement part the first time.

Ordering parts once you have the model number

After you confirm the model number, you can order parts from the parts list for model 10658536700, or search by model on Sears PartsDirect.

Last updated: February 2026

Water leaking from your Kenmore 10658536700 side-by-side refrigerator is usually caused by a clogged defrost drain (water backs up and spills into the fresh food section) or a problem in the water supply circuit (loose tubing or a leaking valve connection). Use the 10658536700 owner's manual to locate access points and follow safe shutoff steps.

Quick checks we recommend first

• Look for a sheet of ice or standing water on the freezer floor; this points to a defrost drain issue.
• Check the water line connection at the lower rear of the refrigerator for drips.
• Inspect the compression nut and sleeve at the valve inlet for seepage.
• Verify the shutoff valve is fully open and not leaking at the packing nut.
• If the leak happens only when dispensing water or making ice, focus on the water circuit.

Most common causes (and what to do)

1) Defrost drain clogged or frozen

When the defrost cycle melts frost, water should flow through the drain to the drain pan. If the drain is blocked by ice or debris, water can overflow and leak.

What to do

• Unplug the refrigerator.
• Clear visible ice around the drain opening (warm water flushes often help).
• Clean the drain opening and confirm water flows freely to the drain pan.

2) Water line or valve connection leaking

The manual’s water line instructions call out checking for leaks and tightening any connections that seep, including at the valve inlet.

What to do

• Turn OFF the main water supply.
• Dry all fittings, then turn water back ON and watch for fresh drips.
• If the valve body itself leaks or won’t seal, replace the inlet valve.

Parts that commonly solve water leaks on this model

Symptom	Likely area	Part to consider
Leak at back near supply line	Water valve or fittings	Refrigerator inlet valve W10408179
Ice maker or dispenser issues plus leaking	Water supply circuit	Refrigerator inlet valve W10408179

Why it matters

Even a small leak can lead to ice buildup, warm temperatures from restricted airflow, and floor damage. Fixing the source early also helps the ice maker and water dispenser work consistently.

If you need to order parts for Kenmore 10658536700, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026