Craftsman 917259530 tractor Parts

For Craftsman model 917259530, the model and serial numbers are on the identification plate under the seat. Lift the seat and copy both numbers exactly; we use the model number to match the correct parts diagrams and the serial number to confirm the right production version.

Where to find the model and serial number plate

Check these common spots on a Craftsman front-engine lawn tractor:

• On a plate or sticker on the frame directly under the seat
• Under the seat pan (underside of the seat area)
• Near the rear fender area close to the seat mounting points
• Occasionally on the frame rail near the seat support bracket

For the exact location and how the plate is labeled on your tractor, use the owner's manual.

How to write the number so parts match

Use these tips so you get the right Craftsman riding mower parts (belts, blades, mandrel parts, steering parts):

• Record the full model number with no missing digits (example: 917259530)
• Copy letters and numbers exactly (some models include letters)
• Write down the serial number too; it helps confirm the correct parts list
• If the label is dirty, wipe it gently so every character is readable
• Keep the numbers in a safe place for future maintenance and tune-ups

Quick reference

What you need	What it’s used for	Example for this tractor
Model number	Finds the correct parts diagrams and part numbers	917259530
Serial number	Confirms the correct production version	(from the plate under the seat)

Why it matters

Craftsman tractors often have multiple versions that look similar but use different deck, belt, or steering components. Using the exact model number helps us match parts like the ground drive belt, blade drive belt, and deck components correctly.

Ordering parts once you have the model number

After you confirm the model number, you can order parts from the parts list for model 917259530, or search by model number on Sears PartsDirect.

Last updated: February 2026

For the Craftsman lawn tractor model 917259530, we use 4-cycle engine oil; SAE 10W-30 is the most common all-temperature choice, and SAE 5W-30 is a strong pick for colder starts. Confirm the exact oil type and capacity in the owner's manual.

Recommended oil by temperature

Use this as a practical guide for typical 4-cycle riding mower engines:

Outdoor temperature	Recommended oil grade	Notes
Below 32°F	SAE 5W-30	Easier cranking and faster lubrication in cold weather
32°F to 100°F	SAE 10W-30	Best all-around choice for most mowing seasons
Consistently hot conditions	SAE 30	Common for warm weather, but less flexible for cool starts

How to check and change oil the right way

We recommend these basics to protect the engine and avoid messy spills:

• Park on a level surface and let the engine cool.
• Disconnect the spark plug wire before servicing.
• Check the oil level before each mow; top off only to the full mark.
• Change oil on schedule (more often in dusty conditions or heavy mowing).
• Clean up any oil spills and keep grass and debris off the engine.

Why it matters

Correct oil viscosity helps the engine stay lubricated during startup and under load. That reduces wear, helps control operating temperature, and supports consistent power when the mower deck is engaged.

Parts and supplies tip

If you are stocking up for seasonal maintenance, we recommend reviewing the maintenance section in the owner's manual and ordering what you need from the parts list for model 917259530, or searching by model on Sears PartsDirect.

Last updated: February 2026

Craftsman model 917259530 was made across a production run, so the exact year is identified by the serial number and date of purchase recorded for your tractor. We recommend using the identification plate under the seat and confirming details in the owner's manual.

How to find the exact year for your 917259530

Use these model-specific checks (they are the fastest way to pin down the build timeframe):

• Lift the seat and locate the model/serial plate (the manual states it is under the seat).
• Write down the serial number exactly as shown.
• Check your date of purchase (the manual provides a space to record it).
• Compare the serial number format to the identification section in the manual.
• If the tractor has had major repairs, verify the plate matches the tractor frame (not a swapped hood or deck).

Where the year information is recorded

The owner documentation for this Craftsman tractor is designed to track the purchase date and identification details.

Item	Where to look	What it tells you
Model number	Plate under the seat	Confirms you have 917259530
Serial number	Plate under the seat	Used to determine production batch/year
Date of purchase	Your receipt or the manual record	Confirms when the unit was originally sold

Why it matters

The exact production year affects parts lookups and service procedures, especially for deck and drive components such as the ground drive belt and blade drive belt routing. When you match by serial number, you avoid ordering a belt, mandrel, or pulley that looks similar but fits a different revision.

Parts you may commonly match by serial number

If you are ordering maintenance or deck-drive items, matching by serial number helps ensure correct fit:

• Lawn tractor ground drive belt, 1/2 x 82-in 532140294
• Lawn tractor drive belt 532144200
• Husqvarna lawn tractor mandrel assembly 532130794

For additional parts beyond the list for this model, search by model number on Sears PartsDirect.

Last updated: February 2026