Kenmore 79042543316 electric range Parts

For Kenmore electric range model 79042543316, we reset the oven control board by power-cycling the range (breaker OFF, then back ON). If you need a deeper reset, this model also supports restoring factory default settings using the keypad sequence shown in the 79042543316 owner's manual.

Reset options (start with the simplest)

• Power cycle reset (recommended first): Turn the oven OFF, switch the range circuit breaker OFF for 5 minutes, then turn it back ON.
• Factory default reset (keypad): Press and hold 7 until the acceptance tone sounds (about 6 seconds), then press START.
• After a power outage: Turn the oven OFF; when power returns, reset the clock and any oven function settings.

Step-by-step: power cycle reset

1. Turn the oven OFF.
2. Switch the range breaker OFF (or remove the fuse).
3. Wait 5 minutes.
4. Restore power.
5. Set the clock and test Bake.

Step-by-step: restore factory default settings

Use this when the control is acting “glitchy” or settings were changed and you want to return to defaults.

1. Make sure the oven is idle.
2. Press and hold 7 for about 6 seconds (until you hear the acceptance tone).
3. Press START.

Reset type	What it does	What you may need to redo
Power cycle	Clears temporary control glitches	Clock, any timed settings
Factory default reset	Restores user options to defaults (including temperature offset back to 0)	Clock, preferences (12/24 hr, tones), any custom offsets

Why it matters

A reset clears temporary electronic control issues and returns the oven to predictable default behavior. If the oven still shows error codes or heats incorrectly after resetting, the problem is often in a component the control monitors, such as the range oven temperature sensor 5304504897 or the control itself.

Last updated: January 2026

On Kenmore electric range model 79042543316, the model and serial number plate is attached to the left side of the oven frame. You can typically see it when you open the oven door (and on some models, by pulling out the storage or warmer drawer). See the 79042543316 owner's manual for the exact label location and what the plate looks like.

Where to look on the range

Check these common spots in this order:

• Open the oven door and look along the left side of the oven frame (front edge).
• If your range has a storage or warmer drawer, pull the drawer out and look at the frame area.
• Use a flashlight and look for a silver or white rating plate with the model and serial number.
• Wipe grease or dust off the frame edge; the label can blend into the finish.

What the model/serial plate includes

The rating plate usually lists:

• Model number (for example, 79042543316)
• Serial number
• Electrical ratings (voltage/amps)
• Manufacturer information

Quick ID checklist

Use this to confirm you found the right information.

Item	What it looks like	Why you need it
Model number	A long number starting with 790	Ensures parts fit your exact Kenmore range
Serial number	Letters and numbers	Helps date the unit and match revisions
Electrical rating	240V info	Helps confirm correct wiring and installation

Why it matters

We use the model number to match the correct parts diagrams and compatible replacements for your Kenmore range. Even small model variations can change parts like the bake element, control panel, or temperature sensor.

Last updated: January 2026

A Kenmore electric range like model 79042543316 typically lasts 13 to 15 years with normal household use. Lifespan depends most on heat stress, cleaning habits (especially the cooktop), and whether key heating and control parts are kept in good working order.

What affects lifespan the most

• Heating components: frequent high-heat baking/broiling can shorten element life.
• Electronic controls: power surges and heat behind the control panel can stress the control board.
• Door sealing and insulation: heat loss makes the oven work harder and can overheat nearby components.
• Cooktop care: scratches and burned-on spills can lead to premature surface issues.
• Wiring connections: loose or overheated terminals can cause intermittent power problems.

Common “wear-out” parts (and what they do)

These parts often determine whether a range feels “old” even when the cabinet is still solid:

Part	What you may notice when it’s failing	Example part for this model
Bake element	Slow preheat, uneven baking, no bake heat	Range bake element 5304521880
Broil element	Weak broil, no top heat	Range broil element 5304521498
Oven temperature sensor	Oven runs hot/cold, temperature swings	Range oven temperature sensor 5304504897
Oven control board	Dead display, erratic temps, functions not responding	Range oven control board 5304503492

How to help your range reach (or beat) the average

• Keep the oven door sealing tightly and clean the gasket area gently.
• Avoid slamming the oven door; it stresses hinges and alignment.
• Clean spills promptly to reduce smoke, odors, and heat cycling.
• Use cookware that matches the surface element size to reduce overwork.
• Follow the care and cleaning guidance in the owner's manual.

Why it matters

Knowing the typical 13 to 15 year lifespan helps you decide whether a repair (like replacing a bake element, sensor, or control board) is a smart investment for your 79042543316 versus planning for replacement.

Last updated: March 2026