Kenmore 79570332411 bottom-mount refrigerator Parts

For a Kenmore refrigerator, the model number is the full identifier you use to match the correct parts and documentation; for this unit, it’s 79570332411. You’ll typically find the model tag inside the fresh food compartment or freezer, often on an interior wall or near the lower drawers (see the 79570332411 owner's manual).

Where to find the model number label

Check these common locations on Kenmore bottom-mount refrigerators:

• Inside the refrigerator compartment on a side wall
• Inside the refrigerator compartment behind or near the lower crisper drawers
• Inside the freezer compartment on an interior wall
• Along the door frame when the door is open
• Near the front base area behind the kick plate or lower grille

How to read the model number correctly

Use the model number exactly as printed on the label.

• Copy every digit and letter in order (no spaces)
• Use the full model number, not a shortened version
• If there’s a serial number, keep it separate; it is not used to look up most replacement parts
• If the label is worn, take a clear photo and zoom in to confirm characters

Model number vs. serial number (quick comparison)

Item	What it’s used for	Example format
Model number	Finding correct parts diagrams and part compatibility	79570332411
Serial number	Manufacturing date and production tracking	Varies by unit

Why it matters

Kenmore model numbers determine which exact components fit your refrigerator, such as the water filter, ice maker, door gasket, or control parts. Using the wrong model number can lead to ordering a part that looks similar but will not mount, seal, or connect correctly.

Last updated: February 2026

A bad compressor in your Kenmore 79570332411 bottom-mount refrigerator usually shows up as poor or no cooling even though the unit has power, along with repeated clicking (start attempts) or the compressor running hot and continuously. Before condemning the compressor, we verify airflow, condenser cleanliness, and the start components.

Quick symptoms that point to a compressor problem

• Refrigerator and freezer both warm or slowly warming over time
• Compressor area is very hot to the touch after running (normal warmth is expected; excessive heat is not)
• Repeated clicking every few minutes (often the start relay cycling)
• Compressor is silent and never starts even though interior lights and controls work
• Compressor runs almost nonstop but temperatures never reach set points

What to check first (common look-alikes)

These checks often identify a simpler fix than replacing a sealed-system component:

• Condenser coil condition: dust and pet hair can cause high temps and poor cooling; clean the coil and confirm the condenser fan is running
• Airflow inside the cabinet: blocked vents, overpacked shelves, or frost buildup can mimic compressor trouble
• Door sealing: warm air leaks force long run times; inspect gaskets for gaps and tears
• Start device: a failed relay can cause clicking and no start; consider the refrigerator compressor start relay EBG60663230
• Temperature sensing/control issues: a bad sensor can cause incorrect run behavior; check the refrigerator temperature sensor 6500JB2002X

Fast diagnosis guide (what the symptoms usually mean)

What you notice	Most likely cause	What we do next
Clicking, compressor not running	Start relay/overload issue	Test/replace start device first
Compressor runs, both sections warm	Sealed system or compressor inefficiency	Check airflow, coil, then sealed-system signs
Compressor very hot, shuts off	Overheating or locked rotor	Verify condenser fan/coil, then electrical tests
No compressor sound, lights work	Control, relay, or compressor	Confirm power to compressor circuit

Why it matters

The compressor is the heart of the cooling system; misdiagnosing it can lead to unnecessary cost. Checking the condenser coil, door seal, and start relay first helps us rule out the most common, lower-cost causes of “not cooling” on bottom-mount refrigerators.

Model-specific help

Your 79570332411 owner’s manual includes a troubleshooting guide section that helps narrow down cooling and operation problems before parts replacement.

Last updated: February 2026

For Kenmore model 79570332411, the correct replacement water filter is ADQ36006102; on our parts list it appears as Genuine Kenmore Refrigerator Water Filter 9690 (part number ADQ36006102). After installing the new filter, flush about 2.5 gallons to clear air and carbon fines (per the 79570332411 owner's manual).

How to confirm you are buying the right filter

Use these checks to avoid ordering the wrong cartridge:

• Match the refrigerator model number to 79570332411 (from the model and serial label inside the fresh food section)
• Match the filter part number to ADQ36006102
• Verify the filter style and locking method match what you remove
• If you are temporarily running without a cartridge, use the bypass plug (do not leave the housing empty)
• Replace the filter about every 6 months, or sooner if flow drops or taste and odor return

Quick match table

What you have	What to order for 79570332411	When to use
Installed water filter cartridge	Genuine Kenmore refrigerator water filter 9690 AGF80300801 (ADQ36006102)	Normal operation with filtration
No cartridge available temporarily	Refrigerator water filter bypass ABN73019101	Short-term use so the housing is not left open

After you replace the filter (important)

We recommend following the manual’s flush procedure so the dispenser runs clear and steady:

• Dispense 2.5 gallons total (about 5 minutes of run time)
• Do it in cycles: 30 seconds ON, 60 seconds OFF
• Discard the first few glasses if the refrigerator was just installed or the dispenser sat unused

Why it matters

Using the correct filter for Kenmore 79570332411 protects water flow to the dispenser and ice maker, helps reduce taste and odor issues, and prevents leaks caused by a mismatched cartridge or an empty filter housing.

Last updated: February 2026

For most households, a bottom-mount freezer like Kenmore model 79570332411 is better for everyday convenience because the fresh-food section sits at eye level; a top-mount freezer is often better if you want the simplest layout and typically lower purchase cost. For model-specific use and setup details, follow the 79570332411 owner's manual.

Quick comparison (what you will notice day to day)

Feature	Top-mount freezer	Bottom-mount freezer (like 79570332411)
Fresh food access	You bend more often	Most-used items are easier to reach
Freezer access	Easier for frequent freezer use	You bend more for freezer items
Organization	Usually simpler shelves/bins	Often better drawer-style storage
Efficiency (typical)	Often slightly better	Can be comparable; depends on usage and features

When a top-mount freezer is the better choice

• You use the freezer more than the refrigerator
• You want a straightforward design with fewer moving parts
• You prefer lighter doors and simpler storage bins
• You are replacing an older top-freezer and want a similar layout

When a bottom-mount freezer is the better choice

• You access fresh food many times per day (most households do)
• You want less bending for refrigerator shelves, crisper drawers, and the water dispenser
• You like freezer drawers that help keep frozen foods from getting buried
• You want easier door closing and alignment after installation (bottom-mount models are sensitive to leveling)

Setup tip that matters for either style

A refrigerator that is not level can feel “worse” than it really is: doors may not close smoothly, seals can leak cold air, and temperatures can drift. In our manual for this model, we call out leveling the cabinet and keeping the front slightly higher than the rear to help the doors close properly.

What to do

• Place the refrigerator on a solid, well-supported floor
• Adjust the front leveling legs to stabilize the cabinet
• Confirm doors close on their own from a partially open position
• Recheck alignment after the unit has run and settled

Why it matters

Choosing the right freezer style affects daily ergonomics, food visibility, and how consistently the doors seal. A good seal and proper leveling help your Kenmore refrigerator maintain stable temperatures and reduce unnecessary run time.

Last updated: February 2026