Craftsman BIT/SOCKETS wrench Parts

Yes. You can order individual Craftsman sockets, but availability depends on the exact socket drive size and measurement system you need (SAE vs. metric) for your Craftsman BIT model. We recommend matching the socket size and drive to your ratchet and fastener before ordering.

• Drive size: 1/4-inch, 3/8-inch, or 1/2-inch drive
• Socket size system: SAE (inch) or metric (mm)
• Socket type: shallow vs. deep
• Point count: 6-point (better grip) vs. 12-point (more access angles)
• Finish and markings: laser-etched or stamped size markings

Using the correct individual socket size and drive helps protect fasteners, improves torque transfer, and reduces the chance of stripping a bolt head, especially on rusted or high-torque applications.

1. Identify the drive size on your ratchet.
2. Measure the fastener head (or test-fit carefully).
3. Search by model and description on Sears PartsDirect to find the closest match.

Last updated: February 2026

Yes. Many Craftsman hand tools are still replaced at no charge when they fail under the applicable warranty; the key is matching your specific tool type and era to the correct warranty terms and then following the current claim process for Craftsman model BIT.

In most cases, “free” refers to a replacement tool (or equivalent) provided under warranty; it does not mean every broken tool qualifies automatically.

Common factors that affect eligibility:

• Tool category (hand tool vs. power tool vs. accessory)
• Warranty type (full lifetime, limited lifetime, limited term)
• Proof of purchase requirements for some items
• Normal wear vs. defect/failure
• Availability of the exact tool (an equivalent may be substituted)

Use this checklist before you start a claim so you do not lose time:

• Identify the exact tool (socket, ratchet, BIT, wrench, etc.) and any markings
• Note the failure mode (cracked socket, stripped drive, broken ratchet pawl)
• Take clear photos of the tool and the damaged area
• Gather any receipt or order details you have (helpful even when not required)
• Keep the broken tool until the claim is completed

Because policies and fulfillment methods vary by tool line, the most consistent approach is to follow the current warranty instructions and submit the information they request.

Craftsman warranties are tied to the specific product line, not just the brand name. Confirming the tool type and warranty terms first helps you avoid delays and ensures you request the correct remedy.

For help identifying the correct model information to use when searching parts and support resources, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

You can buy replacement parts for your Craftsman model BIT by searching the model-based parts listing on Sears PartsDirect. Using the exact model number helps match the correct BIT, socket, ratchet, or accessory so you get the right fit and drive size.

When you shop by model number (like BIT), you narrow results to parts that are intended to fit that specific Craftsman tool or kit.

• Confirm the model number exactly as shown on the tool, case, or packaging
• Match the drive size you need (1/4-inch, 3/8-inch, 1/2-inch)
• Match the BIT style (Phillips, Torx, hex, square) and length
• Check whether you need a single replacement or a full set
• Verify compatibility with any adapters or extensions you already use

Even for “BIT/SOCKETS” style products, small differences matter.

Ordering the correct Craftsman replacement part protects fasteners, improves torque transfer, and helps prevent tool damage. It also saves time by reducing returns and reorders.

Last updated: February 2026

Today, Craftsman sockets are made for the Craftsman brand owned by Stanley Black & Decker; production is sourced through multiple manufacturers and typically varies by product line and where the set is sold. For the most accurate origin, check the country-of-origin marking on the socket or packaging.

Country-of-origin can change between sets and even between sizes in a kit, so we recommend checking the markings directly.

• Look for a stamped or etched “Made in …” on the socket body
• Check the package label for country of origin and any “global materials” wording
• Compare markings across the same set (some kits mix sources)
• Note the drive size and series (1/4-in, 3/8-in, 1/2-in; impact vs chrome)
• Keep the model identifier handy when shopping for compatible accessories (for this page: Craftsman model BIT)

In recent years, many Craftsman socket sets have been produced globally, often in Asia, with some lines assembled or finished in North America depending on the specific product run.

Knowing who makes a specific Craftsman socket set is less important than matching the specifications that affect fit and performance: drive size, SAE vs metric, 6-point vs 12-point, and whether you need impact-rated sockets for an impact wrench.

If you are shopping for parts or accessories and want to be sure you are using the right identifier, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026