Kenmore 11062712100 electric dryer Parts

If your Kenmore electric dryer model 11062712100 won’t run at all, or it runs but won’t heat, a blown thermal fuse or thermal cut-off is a top suspect. We confirm it by unplugging the dryer and checking the fuse for continuity with a multimeter; no continuity means it has failed.

Quick symptoms to look for

• Dryer will not start even though the door is closed and a cycle is selected
• Dryer runs but produces no heat (the drum tumbles, clothes stay damp)
• Heat stops mid-cycle and the dryer won’t restart until it cools
• You find restricted airflow issues (lint screen or venting problems)
• House power checks out (on many electric dryers, heat loss can also happen if one house fuse trips)

How we test it (safe, reliable method)

1. Unplug the dryer (electric shock hazard).
2. Access the thermal fuse or thermal cut-off location listed in the 11062712100 owner’s manual.
3. Remove at least one wire from the fuse terminal.
4. Set a multimeter to continuity (or lowest ohms).
5. Test across the fuse terminals.

What the meter reading means

Meter result	What it means	Next step
Beep or near 0 ohms	Fuse is good	Keep troubleshooting airflow, heat circuit, or controls
No beep or OL/infinite	Fuse is blown	Replace the fuse (and fix the overheating cause)

Parts that commonly apply on this model

On Kenmore 11062712100, overheating is often tied to airflow restriction; when replacing a failed safety device, we also address venting and related heat-limit parts.

• Dryer thermal cut-off fuse kit 279816 (includes the thermal cut-off components used in the heat safety circuit)
• Check the lint screen and exhaust duct for blockage (restricted air movement is a common no-heat cause)
• Consider related temperature controls if overheating repeats, such as the operating thermostat or high-limit thermostat

Why it matters

A thermal fuse or thermal cut-off is designed to stop heat (and sometimes stop the dryer from running) when temperatures get unsafe. Replacing the fuse without correcting poor airflow can cause the new fuse to fail again quickly.

Last updated: February 2026

To find the exact model of a dryer, we look for the model and serial number plate on the cabinet, then copy the model number exactly as printed. For Kenmore model 11062712100, the manual notes the model and serial numbers are on the Model and Serial Number Plate.

Where to look on the dryer

Most Kenmore electric dryers place the model/serial plate in one of these spots:

• Inside the door opening on the front panel (door jamb area)
• On the cabinet frame just behind the door
• On the back panel of the dryer
• Inside the lower front access area (less common)

If you have the paperwork, use it as a backup, but we always match the number on the dryer itself.

What to write down (and why)

Record these items exactly as shown on the plate:

• Model number (example: 11062712100)
• Serial number (helps date and version the unit)
• Date of purchase (useful for service history)

The 11062712100 owner's manual also recommends keeping a product record with the model and serial numbers for future reference.

Quick check: model number vs. serial number

Item	What it does	Used for
Model number	Identifies the exact dryer design	Correct parts diagrams and compatible parts
Serial number	Identifies your specific unit	Production run details, service records

Why it matters

Kenmore model numbers can look similar across different dryers, but small differences change which parts fit (for example, a belt, heating element, or door switch). Using the exact model number helps us match the right replacement part the first time.

Last updated: February 2026

On Kenmore electric dryer model 11062712100, the model and serial information (used to identify the correct replacement parts) is printed on the model and serial number plate, typically found when you open the dryer door. Use that information when ordering parts or requesting service; see the 11062712100 owner's manual.

What to look for on the label

The plate usually lists several identifiers. The most useful ones for parts lookup are:

• Model number (for example, 11062712100)
• Serial number (helps confirm production series)
• Electrical ratings (voltage/amps, helpful for diagnosing heat issues)
• Sometimes a type or manufacturing code

Where to check (most common spots)

For Kenmore 110-series dryers like 11062712100, check these locations in order:

• Door opening area: along the door frame or just inside the opening
• Behind the door: on the cabinet front near the lint screen housing
• Rear panel: occasionally the plate is on the back of the cabinet

Model number vs. part number (quick comparison)

What it is	What it identifies	Example from this model page
Model number	The exact dryer version	11062712100
Part number	A specific replacement component	8066065 (drum belt)
Part ID	Sears PartsDirect identifier for the part page	341241

Why it matters

Kenmore dryers share many similar-looking parts across different model numbers. Using the model number from the plate helps us match the correct components (for example, the dryer drum belt 341241) and avoid ordering a belt, thermostat, or heating element that does not fit.

Last updated: February 2026