Craftsman 917273111 tractor Parts

For your Craftsman lawn tractor model 917273111, the fastest way to find the right replacement parts is to match your symptom or repair area to the correct parts diagram, then confirm the exact part number and fit notes in the 917273111 owner's manual. This helps you avoid ordering look-alike parts that do not fit.

• Locate your model number 917273111 on the tractor ID tag and match it exactly.
• Use the parts diagram for the system you are repairing (mower deck, steering, drive, engine, electrical).
• Compare the diagram callout to the part listing and confirm the part number and description.
• Check related hardware that is commonly replaced at the same time (nuts, clips, bearings).
• If the issue is electrical (no crank, PTO not engaging), identify the switch or interlock component before ordering.

If you already know what area you are working on, these are examples of parts that are commonly searched for this tractor:

Craftsman tractors often have similar-looking components across different model numbers. Using the exact 917273111 diagrams and manual prevents fit issues and reduces repeat repairs.

If the engine clicks or spins but will not start, confirm the battery and safety interlocks first; then move to ignition and fuel checks. The riding lawn mower engine clicks but doesnt turn over video is a good starting point for that symptom.

Last updated: February 2026

On a Craftsman riding mower like model 917273111, we look up the model number by finding the model and serial tag on the tractor itself, then matching that exact number when ordering parts or checking specifications in the 917273111 owner's manual.

On most Craftsman front-engine lawn tractors, the ID tag is typically in one of these spots:

• On the frame under the seat (lift the seat and look down at the frame rails)
• On the underside of the seat pan
• Near the rear fender area under the seat
• Occasionally on the frame near the engine compartment (less common)

Use the model number exactly as printed (including dots or dashes if shown on the tag). For this tractor, the manual identifies it as 917.273111, and parts listings commonly show it as 917273111.

• Enter the full model number when searching for parts diagrams
• Use the serial number to confirm production range when comparing similar models
• Keep a photo of the tag for future maintenance and repairs

Craftsman tractors often share similar looks across multiple years, but parts like belts, steering components, and electrical switches can vary by model. Using the exact model number helps ensure you get the correct diagrams, specifications, and replacement parts the first time.

Last updated: February 2026

On a Craftsman riding tractor like model 917273111, the serial number format depends on the manufacturer and the specific ID tag used on your tractor. We use the ID tag to determine the build date and to match the correct parts list; the most reliable method is to compare the serial number and product number locations shown in the 917273111 owner's manual.

Before decoding anything, record the information exactly as shown on the tractor’s ID tag.

• Model number: 917273111
• Serial number: copy all digits and letters (include dashes)
• Product number (if listed separately)
• Engine model and type (engine has its own ID plate)
• Date code stickers on the frame or under the seat (if present)

Craftsman tractors have been built by different manufacturers over the years, so the “month-day-year” pattern is not universal. Use this as a quick reference, then confirm by matching your tag style in the manual.

Serial numbers help us avoid wrong-part issues when there are mid-year changes to items like belts, steering parts, and electrical switches. For example, if you are diagnosing an electrical no-start or PTO issue, having the correct identification helps match the right switch and wiring layout.

If you are troubleshooting a starting problem while you are gathering tag info, use riding lawn mower engine clicks but doesnt turn over video for a fast, step-by-step check.

Last updated: February 2026

Craftsman riding mowers and lawn tractors use engines from several manufacturers depending on the model and production year. For the Craftsman 917273111 tractor, our 917273111 owner's manual identifies it as a 22.0 HP electric-start garden tractor, but it does not name the engine brand in the excerpted specifications.

Across Craftsman riding equipment, you will commonly see engines supplied by:

• Briggs & Stratton
• Kohler
• Kawasaki
• Other OEM suppliers used in specific model years

The fastest way is to read the engine’s own ID label, since the tractor model number and the engine model number are different.

• Lift the hood and look for an engine data plate or sticker on the blower housing or valve cover
• Record the engine model, type, and code (or serial number)
• Match that information when ordering tune-up parts (spark plug, air filter, fuel filter)
• Use the tractor’s parts diagrams to confirm chassis and deck parts by tractor model number

Engine brand determines the correct maintenance parts and specs (for example, spark plug type and oil capacity). The 917273111 manual lists key operating specs like SAE 10W-30 above 32°F, SAE 5W-30 below 32°F, and a Champion RC12YC spark plug, which are useful starting points when servicing the tractor.

Last updated: February 2026

Craftsman lawn tractor model 917273111 is a front-engine garden tractor with electric start; the exact engine make and model is identified by the engine ID tag on your tractor. Use the 917273111 owner's manual for the model-specific operating and maintenance specs.

Use the engine’s identification label to match the correct tune-up and repair parts.

• Lift the hood and locate the engine ID tag (often on the blower housing, valve cover, or near the starter)
• Write down the engine model, type, and code exactly as shown
• Use that ID to match the correct air filter, spark plug, and fuel system parts
• Confirm your tractor model number is 917273111 (the engine can differ across close variants)
• Keep the engine ID with your records for future service

The owner’s manual is the right source for tractor-level specs and service intervals; the engine ID tag is the right source for the engine’s manufacturer and displacement.

Many Craftsman riding mowers share similar frames and decks, but engine families vary. Using the engine ID prevents ordering the wrong ignition or fuel parts; for example, fuel delivery issues can involve the husqvarna lawn tractor fuel tank 532151346 after you confirm spark and compression.

Last updated: February 2026

For Craftsman lawn tractor model 917273111, the mower deck uses a 46-inch deck belt; the parts list shows deck belt 144959 and an alternate belt 139573 for this deck. Use the belt number that matches your deck routing and pulley setup shown in the 917273111 owner's manual.

Your 917273111 deck can use more than one belt depending on the exact deck configuration and routing. The manual’s mower deck diagram is the fastest way to confirm which belt matches your tractor.

• Confirm your deck size is 46 in. (the manual lists a 46" deck weldment)
• Compare your belt routing to the diagram before ordering
• Replace a belt that is cracked, glazed, stretched, or slipping
• Inspect idler pulleys and spindle pulleys while the belt is off
• Clean packed grass from the belt path to prevent premature wear

• Measure the old belt only as a backup; worn belts measure longer than new
• Verify the belt is a deck belt, not the ground drive belt
• Check for bent belt keepers or misaligned idlers that can throw the belt
• If the belt keeps coming off, inspect the PTO engagement and deck lift hardware

Using the correct belt for the 46-inch deck keeps blade speed correct, improves cut quality, and prevents repeated belt failures caused by incorrect length or routing.

Last updated: February 2026

Craftsman model 917273111 is identified by its model number, not a build year. For this tractor, the owner documentation and parts breakdowns are organized under model 917.273111, but the manufacture date is typically found on the product ID tag (serial/date code) rather than in the model number itself. Use the 917273111 owner's manual to locate the ID tag and confirm the date code format.

On most Craftsman front-engine lawn tractors, the year is determined from the serial number or date code on the tractor’s ID label, not from the 917-prefix model number.

Check these common ID tag locations:

• Under the seat pan or on the seat deck
• On the frame rail near the engine
• Near the rear fender area
• On the left or right side of the chassis
• Near the steering column support

Once you locate the ID tag, look for wording like “Serial”, “S/N”, “Date”, or a stamped code. Craftsman date formats vary by production run, so we recommend matching the code style to the format shown in the 917273111 owner's manual.

Using the correct year from the ID tag helps ensure you get the right parts when there are mid-year design changes (for example, steering components, belts, or electrical switches) even within the same Craftsman tractor series.

Last updated: February 2026