Kenmore 79090212012 electric range Parts

Your Kenmore stove’s model number is printed on the appliance data plate; on Kenmore ranges it’s commonly found around the oven door frame, inside the storage drawer opening, or on the back panel. For this parts page, the model is 79090212012; confirm yours matches before ordering parts.

Where to look on a Kenmore range

Check these common locations first:

• Along the oven door frame (open the oven door and look around the frame)
• Inside the bottom storage drawer opening (pull the drawer out)
• On the back of the range (rear panel label)
• Under the cooktop (only if your cooktop lifts up)
• Near the power cord/terminal block access area (rear access cover area)

What the model number looks like

Kenmore model numbers are typically a long number string. Many Kenmore ranges start with a 3-digit prefix that identifies the manufacturer series (for example, 790 is common on Kenmore ranges).

Use this quick check:

What you see on the label	What it means	What to do next
A full number like 79090212012	Model number	Use it to match parts and manuals
“MOD”, “Model”, or “Model No.” before the number	Label heading	Copy the full number exactly
Extra letters or smaller numbers	Serial/revision codes	Record them, but order parts by model number

Why it matters before you buy parts

We use the model number to match the correct wiring, element style, and control components for your exact Kenmore electric range. Even small model differences can change fit and electrical connections.

If you’re verifying parts for 79090212012, these are examples of model-matched parts you might see listed:

• Range bake element 316075103 (common for “oven not heating” symptoms)
• Frigidaire range oven temperature sensor 316490000 (common for temperature issues)
• Universal/multiflex (frigidaire) range terminal block 5303935271 (common for power connection repairs)

Use the documentation to confirm label location and specs

For model-specific diagrams and identification details, use the 79090212012 installation guide and the 79090212012 manual.

Last updated: February 2026

To reset a Kenmore 79090212012 electric range oven, we recommend doing a hard power reset: turn the range off at the household breaker for 1 to 5 minutes, then restore power and re-set the clock. This clears many control glitches and restores normal operation.

Quick reset steps (safe, no tools)

• Turn OFF the range circuit breaker (or remove the range fuse).
• Wait at least 1 minute (up to 5 minutes is fine).
• Turn the breaker ON.
• Set the clock and test Bake and Broil.
• If the display is blank or the oven still will not heat, stop and move to the checks below.

If the oven still will not work after a reset

A reset will not fix a failed heating circuit or a wiring issue. These checks help you narrow it down:

• Oven will not heat but surface burners work: suspect a failed bake circuit (often the bake element) or temperature sensing issue.
• Oven heats unevenly or temperature is off: suspect the sensor or a weak element.
• Control shows an error code: use the model-family error code guidance to identify the failure.

Helpful model-family reference: Kenmore 790 self-cleaning range error codes

Common parts related to “won’t heat” symptoms

If the reset does not help and the oven will not heat, these are common repair parts for this model family:

Symptom	Most common suspect	Example part for this model
No bake heat	Bake element open/burned	Range bake element 316075103
Temperature swings, over/underheats	Oven temperature sensor out of range	Frigidaire range oven temperature sensor 316490000
No broil heat	Broil element failed	Frigidaire range broil element 316203200

Why it matters

Resetting restores the electronic control to a known good state after a power interruption or keypad glitch. If the problem returns immediately, it usually points to a component issue (element, sensor, wiring, or control) rather than a one-time software hiccup.

For electrical connection and safety details (including terminal block cautions), follow the installation guide.

Last updated: February 2026

A Kenmore electric range like model 79090212012 typically lasts 13 to 15 years with normal household use. Lifespan depends most on heat stress to the oven elements, door seal condition, and whether electrical connections stay tight and corrosion-free.

What affects lifespan the most

• Heating components: bake and broil elements cycle at high temperatures and wear over time.
• Temperature accuracy: a drifting sensor can cause longer heat cycles and extra strain.
• Door sealing: heat loss from a worn gasket makes the oven run longer.
• Electrical supply and connections: loose terminal block connections can cause overheating and failures.
• Cleaning habits: heavy spills and harsh cleaners can damage finishes, knobs, and seals.

Parts that commonly wear first (and what they do)

Symptom	Likely wear item	Example part for 79090212012
Oven not heating or heats unevenly	Bake element	Range bake element 316075103
Oven temperature off by 25 to 50 degrees	Oven temperature sensor	Frigidaire range oven temperature sensor 316490000
Heat escaping, longer preheat times	Oven door seal	Frigidaire range oven door seal 316405000

How to help your range reach the full lifespan

• Keep the oven door closing firmly; replace a flattened gasket promptly.
• Avoid slamming the oven door; it stresses hinges and can distort sealing surfaces.
• Wipe spills after the range cools to prevent baked-on residue and smoke.
• If you ever move the range, reinstall the anti-tip bracket and confirm clearances per the installation guide.
• If you smell hot wiring or see flickering power, stop using the range and have the electrical connection inspected.

Why it matters

A range that is heating efficiently and sealing properly runs fewer total minutes per bake cycle; that reduces element fatigue, improves cooking results, and helps the control and wiring last longer.

Last updated: March 2026