How many cubic feet is a Kenmore model 2539280213 freezer?
The exact cubic-foot capacity for Kenmore upright freezer model 2539280213 is listed on the model’s rating label and in the specifications section of the 2539280213 owner's manual. Use those sources for the official number, then apply the manual’s “per cubic foot” loading guidance.
Where to find the exact capacity
Check these locations on your Kenmore 2539280213:
- The model and serial number plate inside the freezer cabinet (upright models are commonly on the upper left interior wall)
- The specifications or product data section in the 2539280213 owner's manual
- Any original sales receipt or product literature that came with the freezer
How to use cubic feet once you have it
The owner’s guide uses capacity to help you avoid overloading the freezer when adding unfrozen food.
- Freeze about 3 lb of fresh food per cubic foot at one time
- Spread packages evenly throughout the cabinet
- Allow about 4 hours of run time before loading unfrozen food
Quick calculation table
| What you know | What to do | Example |
|---|---|---|
| Capacity in cu. ft. | Multiply by 3 lb | 18 cu. ft. x 3 = 54 lb |
| Pounds to freeze | Divide by 3 lb | 45 lb ÷ 3 = 15 cu. ft. |
Why it matters
Using the correct cubic-foot rating helps you plan safe freezing loads, shorten recovery time after loading, and maintain stable temperatures so food freezes quickly and stays solid.
Last updated: January 2026
Is there a reset button on a Kenmore upright freezer?
Kenmore upright freezers such as model 2539280213 typically do not have a dedicated “reset” button. Most reset-type issues are handled by power-cycling the freezer and confirming the temperature control and alarm settings described in the 2539280213 owner's manual.
What to try first (safe reset steps)
- Unplug the freezer (or switch off the breaker) for 5 minutes.
- Plug it back in and set the temperature control to the normal starting point (many Kenmore uprights are factory pre-set around mid-range, often “4”).
- Allow several hours for temperatures to stabilize after any adjustment.
- If the alarm is sounding or the temp light is blinking, press the TEMP ALARM OFF button to silence the buzzer.
- After a power outage or warm condition, allow a full cool-down period of about 4 hours before judging performance.
If the freezer still will not cool or seems “stuck”
A “reset” symptom is often a cooling or defrost issue. These checks narrow it down:
- Listen for the evaporator fan running; no airflow can cause warm temps.
- Check for heavy frost on the back interior panel (common sign of a defrost problem).
- Make sure the door closes and seals fully; a poor seal causes moisture, frost, and warm temps.
- Confirm the freezer is level; an unlevel cabinet can prevent the door from sealing correctly.
Common parts related to “reset” complaints
| Symptom | Likely system | Example part for 2539280213 |
|---|---|---|
| Heavy frost, warming | Defrost system | Upright freezer defrost timer 5304518034 |
| Door won’t seal, frost buildup | Door sealing | Freezer door gasket 5304507199 |
Why it matters
Power-cycling clears minor control glitches, but temperature stability depends on proper airflow, a tight door seal, and a working defrost system. Getting those right prevents food thawing and repeat alarm conditions.
Last updated: January 2026
Where to find model number on upright freezer?
On Kenmore upright freezer model 2539280213, the model and serial number plate is located on the upper left wall inside the freezer compartment. Write the numbers down exactly as shown; we use them to match the correct parts and diagrams in the 2539280213 owner's manual.
Where to look first (upright freezer)
Start with the most common spot, then work outward:
- Upper left interior wall (inside the freezer cabinet)
- Side wall inside the freezer near the front opening
- Ceiling area inside the freezer (some upright designs)
- Behind the lower kick plate or toe grille (if equipped)
- Rear exterior panel near the bottom
What to record from the plate
For this specific freezer, the model number you want is the full number 2539280213 (not a shortened prefix). The plate also lists a serial number.
| Item on the plate | What it looks like | What we use it for |
|---|---|---|
| Model number | 2539280213 | Correct part fit and diagrams |
| Serial number | Letters and numbers | Identifies production run/version |
| Purchase date (optional) | Month/year you bought it | Service history reference |
Why it matters
Kenmore upright freezers can use different door gaskets, thermostats, and defrost components depending on the exact model and production run. Using the full model number helps prevent ordering the wrong replacement part.
Quick tip before ordering parts
- Take a clear photo of the plate so every digit is readable
- Copy the model number exactly, including all digits
- Use the model number when selecting parts such as the freezer door gasket 5304507199
Last updated: January 2026





