KitchenAid KGSA906PSS00 gas range Parts

Most KitchenAid gas ranges, including model KGSA906PSS00, last 13 to 15 years with normal household use. Consistent cleaning, proper burner flame, and avoiding overheating the oven cavity help you reach the high end of that range; see the KGSA906PSS00 owner's manual for care guidance.

Typical lifespan and what affects it

A gas range’s life is usually limited by heat-related wear on ignition parts, controls, and door seals, not the metal cabinet.

• Daily cooking and high-heat baking shorten life faster than light use
• Spills and boilovers that get into burner heads and valves accelerate corrosion
• Weak ignition (slow light, clicking) increases stress on igniters and spark parts
• Poor leveling can strain the door hinges and affect baking performance
• Skipping routine cleaning can cause uneven flames and soot

Quick care checklist to extend range life

Use these habits to reduce wear on burners, the oven, and the control system:

• Clean burner caps and ports regularly; keep them dry before reassembly
• Wipe up acidic spills (tomato, vinegar, sugar) as soon as the range is cool
• Keep the oven door gasket area clean so the door seals tightly
• Avoid lining the oven bottom with foil (it can trap heat and damage surfaces)
• Confirm the range is level; replace a damaged leveling leg such as level foot WPW10058460 if needed

What “normal” looks like (lifespan guide)

Usage pattern	Expected lifespan	Notes
Light (few meals/week)	15 years	Less heat cycling on igniters and controls
Average (daily cooking)	13 to 15 years	Typical household wear
Heavy (multiple meals/day)	10 to 13 years	Faster wear on ignition and oven components

Why it matters

Knowing the typical lifespan helps you decide whether to repair or replace when issues show up (for example, slow oven ignition, uneven baking, or burner flame problems). If your KGSA906PSS00 is within its expected life, replacing common wear parts is often the most cost-effective path.

Last updated: February 2026

On the KitchenAid KGSA906PSS00 gas range, the main “gas stove” parts are the cooktop surface burners and grates, the control panel and knobs that regulate gas flow and ignition, and the oven components such as the bake burner, broil burner, racks, door gasket, and oven light switch (see the KGSA906PSS00 owner’s manual).

Common gas range part names (cooktop vs. oven)

Here are the most common names customers use when searching for parts:

• Surface burner (burner head, burner base, burner cap) and grate
• Ignition parts (spark igniter, spark module, electrode)
• Gas control parts (surface burner valve, gas valve, gas pressure regulator)
• Oven heat parts (bake burner, broil burner)
• Oven door parts (door gasket, hinges, door latch)
• Convenience parts (oven light bulb, racks, storage drawer)

Parts you can actually replace on KGSA906PSS00

Some parts are commonly replaced when you have weak ignition, uneven flames, or oven heating issues:

• Cooktop burner head: Range burner head WP4455981
• Oven ignition: Range oven igniter WP8054129
• Oven temperature sensing: Wall oven temperature sensor WPW10131825
• Gas conversion (natural gas to LP): Range lp conversion kit 9757426

Quick “name to symptom” guide

What you call it	What it does	Common symptom when it fails
Burner head / cap	Shapes the flame on the cooktop	Uneven flame, yellow tips, poor simmer
Igniter / electrode	Lights the gas	Clicking but no flame, delayed ignition
Oven igniter	Lights the oven burner	Oven won’t heat or heats slowly
Temperature sensor	Helps regulate oven temperature	Overheats, underheats, temp swings

Why it matters

Using the correct part name helps you match the right diagram and order the right replacement. It also speeds up troubleshooting because “burner head,” “igniter,” and “gas valve” point to very different fixes.

Last updated: February 2026

On the KitchenAid gas range model KGSA906PSS00, the model number is on the model and serial rating plate located on the oven frame behind the storage drawer panel. Pull the storage drawer out to view the label and copy the full model and serial number.

How to find it (quick steps)

• Turn the range off and let it cool.
• Pull the storage drawer straight out; lift slightly if it stops on the rails.
• Look at the oven frame behind the drawer opening.
• Find the model and serial rating plate.
• Write down the full model number (KGSA906PSS00) and the serial number.

What you should see on the label

The rating plate typically includes identification details you will need for parts and service.

Label item	What it’s used for
Model number	Matching the correct KitchenAid parts diagrams and parts
Serial number	Identifying production details for service and support
Gas type and ratings	Confirming installation and fuel requirements

Why it matters

Using the exact model number helps us match the correct burner, igniter, and control parts for your KGSA906PSS00 gas range. Even small model variations can change which parts fit.

Helpful reference

For the exact label location and installation clearance notes, use the KGSA906PSS00 installation guide.

Last updated: February 2026