Samsung RF26J7500SR/AA-02 refrigerator Parts

On the Samsung RF26J7500SR, the water filter is typically installed inside the fresh food (refrigerator) compartment, either between the crisper drawers at the bottom center or in the upper right area, depending on the exact configuration. The quickest way to confirm your exact location is in the RF26J7500SR owner's manual.

How to find it fast (what to look for)

• Open both refrigerator doors and look for a round twist-in filter head.
• Check the bottom center area just above or between the crisper drawers.
• If you do not see it there, check the upper right corner inside the refrigerator section.
• Look for a small label or arrow showing “LOCK/UNLOCK” or a twist direction.
• If your filter is hard to turn, use a dry cloth for grip (do not use tools).

Do you “have a filter” if you do not see one?

Most RF26J7500SR units use a cartridge-style internal filter. If you do not see a cartridge installed, you may still have the filter housing and simply need to install a replacement.

Here is a quick check:

What you see	What it usually means	What to do next
A round cap/housing but no cartridge	Filter is missing or removed	Install a new filter and flush water
A cartridge already installed	Filter is present	Replace on schedule and reset filter light
No housing in either location	Configuration varies	Confirm layout in the manual

Replacement part that fits this model

For this model, a common replacement is the refrigerator water filter DA29-00019A. After installing a new filter, dispense and discard several gallons of water to clear air and carbon fines.

Why it matters

A correctly installed refrigerator water filter helps protect the water inlet valve and improves taste and flow. A missing or clogged filter can cause slow dispensing and can contribute to ice maker fill problems.

Last updated: February 2026

No. Samsung model RF26J7500SR is a bottom-mount refrigerator (French door style with a freezer drawer on the bottom), not a side-by-side. For the exact configuration and feature set for your unit, use the RF26J7500SR owner's manual.

How to tell bottom-mount vs side-by-side

A quick visual check confirms the style:

• Bottom-mount (this model): two fresh-food doors on top, freezer drawer on the bottom
• Side-by-side: two tall doors that run top-to-bottom; freezer is typically on the left
• Top-freezer: one refrigerator door with a smaller freezer door above
• Single-door: one full-height door (freezer may be internal)

What “bottom-mount” means for parts and troubleshooting

Bottom-mount designs commonly use separate airflow and ice/water components that can affect symptoms like warm temperatures, slow ice production, or dispenser issues.

If you’re troubleshooting	Common area to check	Example part for this model
Not making ice or poor ice quality	Ice maker and ice path	Refrigerator ice maker assembly DA82-02701A
Water tastes/flows poorly	Filter and water supply	Refrigerator water filter DA29-00019A
Fresh-food section warming	Evaporator cover/fan area	Refrigerator fresh food evaporator cover and fan assembly DA97-12608B

Why it matters

Refrigerator style affects how cold air moves, where ice is made, and which assemblies fit. Confirming RF26J7500SR is bottom-mount helps you choose the correct Samsung parts (like the water filter, ice maker assembly, and evaporator fan components) and follow the right diagnostic steps.

Last updated: February 2026

For the Samsung RF26J7500SR refrigerator, the correct replacement water filter listed for this model is the refrigerator water filter DA29-00019A. Use this exact filter to maintain proper water flow, taste, and dispenser/ice maker performance.

How to confirm you are buying the right filter

We recommend matching the filter by part number, not by a “fits many models” description.

• Match the part number to DA29-00019A
• Replace the filter on schedule (most households: about every 6 months)
• If water flow is slow, replace the filter first before troubleshooting the valve or lines
• After installing, flush several gallons of water to clear air and carbon fines
• Reset the filter indicator using the steps in the RF26J7500SR owner's manual

Quick compatibility check

What to match	What you should see	Why it matters
Filter part number	DA29-00019A	Ensures correct fit and sealing
Installation style	Twist-in cartridge (typical for this Samsung platform)	Prevents leaks and bypass
Symptoms after install	Normal flow, no leaks, clear water	Confirms proper seating

Why it matters

Using the correct Samsung filter helps prevent leaks at the filter head, avoids restricted water flow to the dispenser, and supports consistent ice production. If the filter is incorrect or not fully seated, you can get slow dispensing, odd taste, or air spurts.

Last updated: February 2026

If your Samsung RF26J7500SR isn’t making ice, the most common causes are a shutoff water supply, a frozen or blocked fill path, the ice maker being turned off or jammed, or a cooling/airflow problem that keeps the ice maker compartment too warm. Use the checks below, then follow the RF26J7500SR owner's manual for the model-specific reset and test steps.

Quick checks we recommend first

• Confirm the ice maker is turned ON and the ice bin is seated fully.
• Make sure the freezer is cold enough; most refrigerators make ice reliably when the freezer is around 0°F.
• Check the household water shutoff valve is fully open.
• Inspect the water line behind the refrigerator for kinks, pinches, or leaks.
• Dump old ice and look for a clump that can block the bin or auger.
• If the dispenser water flow is weak, replace the refrigerator water filter haf-qin/exp.

What to check based on the symptom

Symptom	Most likely cause	What to do next
No ice at all, water dispenser also weak	Restricted water supply or clogged filter	Replace filter, verify shutoff valve, check line for kinks
Ice maker has ice but won’t dispense	Ice clump, bin issue, chute sealing issue	Empty bin, break up clumps, inspect door/chute area
Ice maker cycles but cubes are small/hollow	Low water flow	Replace filter, check inlet valve and supply pressure
Ice maker area is warm or frost builds up	Fan/defrost/airflow issue	Check for blocked vents, listen for fan operation

Parts that commonly fix “no ice” on this model

These are frequent culprits when basic checks do not restore ice production:

• Refrigerator water inlet valve DA62-04027A (no or low water fill)
• Refrigerator ice maker assembly DA82-02701A (won’t cycle or harvest)
• Refrigerator temperature sensor DA32-10104N (incorrect temperature feedback)

Why it matters

An ice maker depends on two things: steady water flow and freezer-level temperatures. A clogged water filter, a pinched supply line, or poor airflow in the ice maker compartment can stop ice production even when the refrigerator seems to cool normally.

Last updated: February 2026