Whirlpool ED25TEXHN00 side-by-side refrigerator Parts

For your Whirlpool ED25TEXHN00 side-by-side refrigerator, you can find cubic feet (storage capacity) by calculating the interior volume of the fresh food and freezer compartments in inches, then converting to cubic feet by dividing by 1,728.

1. Empty enough space to measure accurately. Remove bulky bins if needed.
2. Measure the usable interior of each compartment (not the exterior cabinet):
   • Width (left to right)
   • Depth (front to back)
   • Height (bottom shelf area to the top usable area)
3. Calculate each compartment’s volume in cubic inches:
   • width × depth × height
4. Convert to cubic feet:
   • cubic inches ÷ 1,728 = cubic feet
5. Add the two results (refrigerator + freezer) for total capacity.

• Measure usable space; shelves, ducts, and fixed housings reduce real storage.
• Use inches for all measurements so the conversion stays consistent.
• If the compartment has a hump or fixed tower, measure the largest rectangular usable area, then subtract obvious blocked sections.

Cubic feet helps you compare refrigerator sizes, plan kitchen fit and food storage, and choose compatible accessories (like bins and shelves) for your ED25TEXHN00.

If you are troubleshooting cooling or airflow issues that affect usable storage (frost buildup, warm sections), use our Whirlpool refrigerator error codes guide to narrow down common problems.

Last updated: February 2026

The most common Whirlpool refrigerator problem is poor cooling caused by an airflow issue, especially when the evaporator fan is not moving cold air through the fresh food and freezer sections. On Whirlpool ED25TEXHN00, we start troubleshooting by checking fan airflow, frost buildup, and temperature control operation.

• Refrigerator section is warm but freezer is closer to normal
• Temperature swings (food freezes in the fridge or warms up unexpectedly)
• Unusual fan noise, rattling, or no fan sound at all
• Frost or ice buildup on the freezer back panel
• Ice maker performance drops because the freezer is not consistently cold

1. Confirm vents are clear: Do not block return vents with packages.
2. Listen for the evaporator fan: It typically runs when the compressor is running (door switch may need to be pressed to hear it).
3. Check for heavy frost: A solid frost sheet points to a defrost system problem.
4. Verify temperature settings: Make sure controls were not bumped warmer.
5. Clean condenser area: Dust buildup reduces cooling and can mimic fan problems.

If the fan is running but you have frost buildup or unstable temperatures, these model-matched parts are common solutions:

A failed evaporator airflow or defrost component forces the compressor to run longer, raises food-safety risk, and can lead to ice buildup that blocks air passages. Fixing the root cause restores normal circulation and steadier temperatures.

Last updated: February 2026

Your Whirlpool refrigerator’s model number is printed on the appliance’s rating label; on many side-by-side units like model ED25TEXHN00, it’s typically inside the fresh food compartment on a side wall, ceiling area, or near the crisper (salad) drawers.

• Inside the refrigerator section on the left or right interior wall
• On the ceiling area inside the fresh food compartment
• Around the crisper frame or just behind/above the crisper drawers
• On the hinge-side door jamb area (open the door and check the frame)
• Behind the toe grille or lower front kickplate area (less common)

Most Whirlpool rating labels include:

• Model number (example format: ED25TEXHN00)
• Serial number (unique to your unit)
• Electrical ratings (volts/amps)
• Sometimes a type code or manufacturing info

Whirlpool uses model numbers to match the correct parts and diagrams. Even one character difference can change the correct ice maker, thermostat, door gasket, or water system parts.

Write the model number exactly as shown (letters and numbers), then match it to the parts list for ED25TEXHN00 to avoid returns.

Last updated: February 2026

Most Whirlpool refrigerators, including the Whirlpool ED25TEXHN00 side-by-side refrigerator, typically last 10 to 15 years with normal household use. Consistent cleaning, good airflow around the cabinet, and prompt repair of cooling or ice maker issues help you reach the upper end of that range.

• Condenser cleanliness: Dust buildup makes the compressor work harder.
• Door seal condition: Air leaks force longer run times and create frost.
• Fan performance: Weak airflow can cause warm temps and compressor strain.
• Defrost system health: Frost-clogged coils reduce cooling efficiency.
• Water and ice system upkeep: Leaks and clogs can create secondary damage.

Use this as a practical rule of thumb for a Whirlpool side-by-side like ED25TEXHN00.

If your refrigerator is otherwise cooling well, these are the types of fixes that often restore normal operation:

• Replace a worn ice maker with the ice maker assembly - refrigerator ice maker by Whirlpool 4317943.
• Address temperature control problems with the refrigerator thermostat WP2198202.
• Fix frost and warm-temperature complaints by checking the defrost circuit, including the refrigerator defrost bi-metal WPW10225581 and the refrigerator heater WP2323198.
• Improve airflow issues by inspecting the evaporator fan area; the refrigerator evaporator fan blade WP2169142 is a common wear item.

A refrigerator that runs longer than it should (from dirty coils, air leaks, or defrost problems) puts extra load on sealed-system components like the compressor. Keeping temperatures stable and airflow clear is the simplest way to protect long-term reliability.

Last updated: February 2026