Frigidaire DFHS2313MFKA refrigerator Parts

On a Frigidaire DFHS2313MFKA refrigerator, CF indicates the electronic control system is detecting a cooling or communication problem. In practice, it often points to a control board issue, a loose connection, or a wiring problem between the user interface and the main control.

What to do first (quick checks)

• Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• Confirm the unit is actually cooling: check that the freezer is near 0°F and fresh food is near 37°F.
• Make sure doors seal fully and close completely; poor sealing can trigger performance-related alerts.
• Verify the temperature controls are set correctly (see the DFHS2313MFKA owner's manual).
• Listen for normal operation: fans running and the compressor cycling on and off.

Common causes and likely fixes

CF is usually tied to one of these areas:

• Loose or damaged wiring harness between the display/control panel and the main control
• Main electronic control board not responding correctly
• User interface/control panel problem (less common)
• Cooling system not keeping up (airflow restriction, dirty condenser, fan issue)

If you suspect a control problem, the model DFHS2313MFKA uses electronic controls; a failing board is a common root cause. One part that’s often involved in control-related faults is the refrigerator electronic control board 242053503 (match by model and wiring connectors before ordering).

How to narrow it down

What you notice	Most likely area	What we recommend
CF appears but temps are normal	Intermittent connection or early board issue	Reseat connectors; watch for repeat codes
CF plus warm temps	Cooling performance problem	Check airflow, fans, condenser cleanliness
CF after power outage/surge	Control reset or board damage	Reset first; if it returns, test/inspect controls

Why it matters

When the control system detects a performance problem, the refrigerator may not maintain safe food temperatures. Addressing CF quickly helps protect food, reduces compressor run time, and prevents repeat icing or airflow issues.

For code interpretation and related display messages, we also use the Frigidaire refrigerator error codes guide alongside the manual.

Last updated: February 2026

Cooling and airflow problems are the most common issues we see with Frigidaire refrigerators like model DFHS2313MFKA; symptoms include a warm fresh-food section, temperature swings, excess moisture, or the unit running too long. These problems usually trace back to restricted airflow, dirty condenser coils, or a door that is not sealing tightly (all of which affect temperature control). See the DFHS2313MFKA owner's manual for the model’s normal operating behavior and the “Solutions to common problems” guidance.

Most common symptoms customers notice

• Refrigerator section warm but freezer still cold
• Refrigerator runs most of the time or cycles frequently
• Frost buildup or moisture on interior walls
• Food freezing in the refrigerator section (airflow imbalance)
• Ice maker or dispenser performance issues (often tied to water supply or airflow)

Quick checks that fix many “not cooling right” complaints

From our experience with side-by-side refrigerators, these steps solve a large share of cooling complaints without parts replacement:

• Make sure doors close fully and the gasket seals all the way around
• Clean the condenser coils (dirty coils make the compressor run longer)
• Confirm vents are not blocked by food packages
• Verify the refrigerator is level and the toe grille is installed correctly
• Set temperatures to normal targets and give the unit 24 hours to stabilize

Common causes and what they affect

Common cause	What you’ll notice	What to do first
Dirty condenser coils	Long run times, weak cooling	Clean coils and recheck temps
Door gasket leak	Moisture, longer run times	Clean gasket, check for gaps
Airflow restriction	Warm fridge, uneven temps	Clear vents, avoid overpacking
Evaporator fan issue	Warm fridge, poor circulation	Inspect fan area; service if noisy

If you suspect an airflow problem, our how to fix your evaporator cooling fan guide walks through the typical symptoms and checks.

Why it matters

A refrigerator cools by moving air across the evaporator and rejecting heat at the condenser. When airflow is restricted or the door seal leaks, the control system works harder to hold temperature, which leads to warm spots, moisture, and longer run times.

Last updated: February 2026

On a Frigidaire DFHS2313MFKA side-by-side refrigerator, we clear many error codes by doing a power reset (unplugging the refrigerator briefly, then restoring power). If the code returns, the control is detecting an active problem, so troubleshooting the related system is the real fix. See the DFHS2313MFKA owner's manual for display messages and control functions.

Quick reset steps (safe first checks)

• Unplug the refrigerator (or switch the breaker off) for 5 minutes.
• Restore power and wait 2 to 5 minutes for the control to reboot.
• Confirm the cooling system is ON (the control panel has an On/Off button that must be pressed and held about 3 seconds to toggle cooling).
• If the code relates to ice or water, confirm the house water supply is on and the filter is fully seated.
• If the display keeps flashing a code after the reset, treat it as a current fault and move to targeted checks.

What the reset does (and does not do)

A reset clears temporary control glitches and restarts the electronic control. It does not repair a failed component (fan motor, sensor, valve, ice maker, wiring) that is still reporting a problem.

Action	What it affects	When to use it
Unplug for 5 minutes	Full control reboot	Any new or intermittent code
Control panel On/Off (hold 3 seconds)	Stops/starts cooling only	After power events, troubleshooting
Targeted repair	Fixes the cause	Code returns after reset

If the code points to ice maker or water dispenser issues

These are common areas that trigger alerts or symptoms that look like “errors”:

• Water supply shutoff valve closed or kinked water line
• Filter not fully seated or overdue for replacement
• Weak or no water flow at the dispenser
• Ice maker not cycling or not filling

Helpful model-matched parts to check when symptoms fit:

• Refrigerator water inlet valve assembly 242252702 (controls water flow to ice maker and dispenser)
• Refrigerator ice maker 241798231 (ice production and harvest)
• Refrigerator water filter WF3CB (flow and taste; replace on schedule)

For step-by-step guidance, we recommend Frigidaire refrigerator error codes and how to replace the water filter in a Frigidaire refrigerator.

Why it matters

When an error code persists after a reset, the refrigerator is protecting food temperatures by flagging a performance problem. Fixing the underlying cause prevents warm temps, no-ice complaints, and repeat alarms.

Last updated: February 2026

A water leak underneath your Frigidaire DFHS2313MFKA side-by-side refrigerator is typically caused by a clogged or frozen defrost drain (water overflows and runs out) or a slow leak at the household water supply connections feeding the ice maker and dispenser.

Quick checks that pinpoint the source

• Look for ice or standing water on the freezer floor; this points to a defrost drain issue.
• Check the drain pan underneath for cracks, overflow, or being out of position.
• Inspect the water line connection at the back of the refrigerator for drips.
• Check around the inlet valve area for seepage that can run down the cabinet.
• Confirm the refrigerator is level and slightly tilted back so water routes to the drain system.

Fix the most common cause: defrost drain overflow

1. Unplug the refrigerator.
2. Remove items from the freezer floor and locate the drain trough/opening.
3. Melt ice with warm (not boiling) water; flush until water flows freely.
4. Verify water reaches the drain pan after the next defrost cycle.

Check the water supply and inlet valve

The DFHS2313MFKA uses a household cold water supply; our guidance calls for 30 to 100 psi and 1/4-inch OD copper or stainless tubing. Use the installation checklist approach: confirm no leaks at any connection, then recheck after 24 hours.

• Snug compression fittings gently (over-tightening can deform ferrules).
• Trim and reseat tubing ends if they are scratched or out-of-round.
• Replace a seeping valve body or cracked fitting.

If the leak traces to the valve, use Frigidaire refrigerator water inlet valve assembly 242252702.

Symptom guide

What you see	Most likely cause	What to do next
Ice/water on freezer floor, puddle under front	Defrost drain clogged/frozen	Clear and flush the drain
Puddle near back by wall	Supply line connection leaking	Reseat and snug fitting
Leak after dispenser/ice maker use	Inlet valve or line seepage	Inspect lines; replace valve if leaking

Why it matters

Stopping the leak quickly prevents floor damage and reduces the chance of ice buildup that can block airflow and affect cooling.

For leveling and “no leaks at all connections” checks, use the DFHS2313MFKA installation guide.

Last updated: February 2026