Kenmore 66513479N411 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66513479N411. The key is matching parts by the full model number so you get the correct fit and connections for common repairs like draining issues, heating problems, and rack hardware.

How to find the right part for your Kenmore 66513479N411

Use the model number 66513479N411 when shopping and confirm the part by name and ID.

• Look up parts by symptom (won’t drain, not cleaning, not drying)
• Match the exact model number from the rating label to avoid wrong-fit parts
• Compare the part ID on the listing to your original part (when possible)
• Use the diagrams and part lists in the 66513479N411 owner's manual
• For installation-related items (hoses, valve, wiring clearance), follow the 66513479N411 installation guide

Common Kenmore dishwasher parts we stock for this model

These are examples of frequently replaced parts shown for 66513479N411:

Problem you notice	Part that often fixes it	Example part for this model
Water not heating or poor drying	Heating element	Element assembly W10518394
Dishwasher won’t drain or leaves water	Drain pump	Dishwasher drain pump WPW10348269
Not filling or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor wash coverage, debris left behind	Spray arm or filter	Dishwasher spray arm, lower W10849471, dishwasher filter WPW10463906

Why it matters

Kenmore dishwashers are built with model-specific plumbing, electrical connections, and rack hardware. Using the exact 66513479N411 model number helps ensure the replacement part fits correctly and restores normal wash performance.

Last updated: February 2026

Repairing a Kenmore dishwasher is worth it when your 66513479N411 is still cleaning well overall and the fix is a common wear item (drain pump, inlet valve, heater, latch, hoses, filters). It is less worthwhile when multiple major systems fail at once or the tub is damaged.

Quick way we decide: cost, age, and what failed

Use these checkpoints from our repair experience with Kenmore dishwashers like model 66513479N411:

• Age: Dishwashers typically last 10 years.
• Repair cost: If the repair is under about 50% of replacement cost, repair usually makes sense.
• Failure type: Single-part failures (drain, fill, heat, latch) are usually good repair candidates.
• Leak source: Hoses and seals are usually straightforward; a cracked tub is not.
• Performance history: If it has been reliable and quiet, repairing is usually the better value.

For model-specific operating and troubleshooting guidance, use the 66513479N411 owner's manual.

Common repairs that are usually “worth it”

These are frequent, targeted fixes that often restore normal washing and drying:

Symptom	Likely area	Example part for this model
Won’t drain	Drain pump or drain hose	Dishwasher drain pump WPW10348269
Won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor drying or no heat	Heater circuit	Element assembly W10518394
Door won’t latch or starts then stops	Door latch	Dishwasher door latch WPW10653840

When replacement is the better call

Replacement is the better value when you see any of these patterns:

• Repeated leaks from multiple areas (sump, hoses, door) in a short time
• Multiple major parts needed at once (pump/motor plus controls plus leaks)
• Tub damage or severe corrosion (high-cost structural repair)
• Chronic wash issues even after cleaning filters and spray arms

Why it matters

A dishwasher repair is usually a single-component fix; when you address the root cause (drain, fill, heat, or latch), you often restore cleaning performance without the cost and hassle of replacing the entire unit.

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the model and serial number label on the tub frame. On 66513479N411, you typically see it when you open the door and look around the door opening area.

Where to look on the dishwasher

Check these common label locations first:

• Open the dishwasher door and look along the inner door frame (left or right side)
• Look along the top edge of the tub opening (just under the countertop)
• Check the side wall of the tub opening near the front
• If a panel was replaced, check for a label on the tub itself (not the outer door panel)

The Use and Care Guide calls this the model and serial number label.

What the label looks like and what to write down

The label usually includes both a model number and a serial number.

Item	What it’s used for	Example format
Model number	Ordering correct parts, matching diagrams	665.XXXXXXX
Serial number	Identifying production date and version	Letters and numbers

Write the model number exactly as shown (including any dots or extra characters).

Why it matters

Kenmore 665-series dishwashers can use different racks, pumps, valves, and filters depending on the exact model. Using the full model number helps us match the correct diagrams and parts the first time.

Helpful reference

For a diagram showing the label location and other key components (like the water feed tube and heating element), use the 66513479N411 owner’s manual.

Last updated: March 2026