Kenmore 66513479N411 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66513479N411. The key is matching parts by the full model number so you get the correct fit and connections for common repairs like draining issues, heating problems, and rack hardware.

Use the model number 66513479N411 when shopping and confirm the part by name and ID.

• Look up parts by symptom (won’t drain, not cleaning, not drying)
• Match the exact model number from the rating label to avoid wrong-fit parts
• Compare the part ID on the listing to your original part (when possible)
• Use the diagrams and part lists in the 66513479N411 owner's manual
• For installation-related items (hoses, valve, wiring clearance), follow the 66513479N411 installation guide

These are examples of frequently replaced parts shown for 66513479N411:

Kenmore dishwashers are built with model-specific plumbing, electrical connections, and rack hardware. Using the exact 66513479N411 model number helps ensure the replacement part fits correctly and restores normal wash performance.

Last updated: February 2026

Repairing a Kenmore dishwasher is worth it when your 66513479N411 is still cleaning well overall and the fix is a common wear item (drain pump, inlet valve, heater, latch, hoses, filters). It is less worthwhile when multiple major systems fail at once or the tub is damaged.

Use these checkpoints from our repair experience with Kenmore dishwashers like model 66513479N411:

• Age: Dishwashers typically last 10 years.
• Repair cost: If the repair is under about 50% of replacement cost, repair usually makes sense.
• Failure type: Single-part failures (drain, fill, heat, latch) are usually good repair candidates.
• Leak source: Hoses and seals are usually straightforward; a cracked tub is not.
• Performance history: If it has been reliable and quiet, repairing is usually the better value.

For model-specific operating and troubleshooting guidance, use the 66513479N411 owner's manual.

These are frequent, targeted fixes that often restore normal washing and drying:

Replacement is the better value when you see any of these patterns:

• Repeated leaks from multiple areas (sump, hoses, door) in a short time
• Multiple major parts needed at once (pump/motor plus controls plus leaks)
• Tub damage or severe corrosion (high-cost structural repair)
• Chronic wash issues even after cleaning filters and spray arms

A dishwasher repair is usually a single-component fix; when you address the root cause (drain, fill, heat, or latch), you often restore cleaning performance without the cost and hassle of replacing the entire unit.

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the model and serial number label on the tub frame. On 66513479N411, you typically see it when you open the door and look around the door opening area.

Check these common label locations first:

• Open the dishwasher door and look along the inner door frame (left or right side)
• Look along the top edge of the tub opening (just under the countertop)
• Check the side wall of the tub opening near the front
• If a panel was replaced, check for a label on the tub itself (not the outer door panel)

The Use and Care Guide calls this the model and serial number label.

The label usually includes both a model number and a serial number.

Write the model number exactly as shown (including any dots or extra characters).

Kenmore 665-series dishwashers can use different racks, pumps, valves, and filters depending on the exact model. Using the full model number helps us match the correct diagrams and parts the first time.

For a diagram showing the label location and other key components (like the water feed tube and heating element), use the 66513479N411 owner’s manual.

Last updated: March 2026