KitchenAid KFGG500ESS2 gas range Parts

On the KitchenAid gas range model KFGG500ESS2, we clean the surface-burner igniter by turning all controls off, letting the cooktop cool, removing the burner cap, then wiping around the igniter and gas tube opening with a damp cloth so the burner can spark and light reliably. See the KFGG500ESS2 owner’s manual.

Safe, effective igniter cleaning steps

• Turn all burner knobs off; make sure the cooktop is completely cool.
• Lift off the burner grate (if needed) and remove the burner cap from the burner base.
• Wipe the igniter area gently with a damp cloth; avoid soaking the igniter.
• Clean the gas tube opening with a damp cloth.
• If burner ports are clogged, clear them with a straight pin (do not enlarge the ports; do not use a toothpick).
• Reinstall the burner cap, aligning the pins correctly, then test ignition.

What to avoid (prevents damage and misfires)

Avoid	Why it matters
Oven cleaners, bleach, rust removers	Can damage finishes and components and leave residues that affect ignition
Abrasive pads or steel wool near controls	Can scratch surfaces and damage control areas
Flooding the igniter with water	Moisture can cause weak sparking or delayed ignition
Enlarging burner ports	Changes flame pattern and can cause uneven heating

Quick checks after cleaning

• Normal behavior: all surface burners may click when you turn one knob to the light position; only the selected burner should light.
• Flame check: adjust the flame so it does not extend beyond the edge of the pan.
• If clicking continues without lighting: recheck cap alignment and confirm ports and the igniter tip are clean and dry.

When a part is the real fix

If the burner still will not light after cleaning and drying, the ignition system may need a replacement component. For this model, common ignition-related parts include the spark module (red) WPW10475149 and the electrode WPW10515459.

Why it matters

A clean igniter area, clear burner ports, and a properly seated burner cap help the burner light quickly, reduce delayed ignition, and keep flames even for safer, more consistent cooking.

Last updated: February 2026

On your KitchenAid gas range model KFGG500ESS2, the model number and serial number are printed on the oven frame behind the top right side of the oven door. This label is the best reference for ordering parts and getting accurate service information; see the KFGG500ESS2 owner's manual.

How to locate the model number label

1. Open the oven door.
2. Look at the oven frame (the front frame around the oven opening).
3. Check behind the top right side of the open door area for the model and serial label.

Quick tips that prevent parts-ordering mistakes

• Copy the model number exactly as printed (letters and numbers).
• Record the serial number too; it helps confirm production details.
• Take a clear photo of the label for future reference.
• Use the model number when selecting parts like an igniter, electrode, or control board.
• If the label is hard to read, wipe it gently with a damp cloth and dry it.

What the model number is used for (and why it matters)

We use your model number to match the correct KitchenAid parts diagrams and compatible replacement parts. Even small model-number differences can change burner components, oven igniters, and console parts.

You need	Use this from the label	Why it matters
Replacement parts	Model number (KFGG500ESS2)	Ensures correct fit and wiring/connector match
Troubleshooting help	Model and serial number	Speeds up diagnosis and avoids wrong parts
Service scheduling	Model and serial number	Confirms the exact unit being serviced

If you are ordering a common repair part

For example, if the oven is not heating properly, you may be looking for an igniter. Using the exact model number helps you choose the correct part, such as the range oven igniter WPW10324262 when it matches your symptom and diagram.

Last updated: February 2026

A KitchenAid KFGG500ESS2 gas range typically lasts 13 to 15 years with normal household use and routine care. Keeping burners clean, ensuring proper ignition, and addressing weak heating early helps you get the full service life from this range.

What affects lifespan most

• Burner and igniter wear from heavy cooking and boil-overs
• Heat stress on electronic controls and touch panels
• Oven door seal condition (heat loss makes components work harder)
• Cleaning habits (avoiding harsh abrasives on surfaces and knobs)
• Proper leveling and stable installation

Quick upkeep checklist (high impact)

• Clean burner heads and ports regularly; dry fully before reassembly.
• If the oven takes longer to light or smells like unburned gas, inspect the igniter and burner flame pattern.
• Replace a dim or failed oven light with the correct light bulb 8009.
• Confirm the range is level; adjust feet if needed.
• Follow the cleaning and care steps in the KFGG500ESS2 owner's manual.

Common “wear” parts vs. “long-life” parts

Category	Examples on this model	Typical reason for replacement
Wear items	Light bulb, burner head, electrode	Normal use, spills, corrosion
Ignition/heating	Oven igniter, burner igniter	Slow ignition, no-heat, weak flame
Controls	Spark module, membrane switch	Clicking issues, intermittent response

Why it matters

A range that is slow to ignite or losing heat often runs longer to do the same job; that extra runtime accelerates wear on igniters, gas valve components, and control parts. Catching ignition and sealing issues early is the simplest way to extend the life of your KFGG500ESS2.

Last updated: March 2026