Owner’s manual
Error Codes
How to reset a Samsung refrigerator RS265TDRS?
To reset your Samsung RS265TDRS refrigerator, we recommend doing a power reset first: unplug the refrigerator for about 1 minute, then plug it back in. This clears many control glitches after a power outage or display issue.
Quick reset steps (most common)
- Unplug the refrigerator (or turn off the breaker).
- Wait 60 seconds.
- Plug it back in (or turn the breaker on).
- Wait 3 to 5 minutes for the control to stabilize.
- Confirm the interior lights and temperature display come back on.
- Allow several hours for temperatures to return to normal after any reset.
For model-specific control and display details, follow the reset and operating guidance in the RS265TDRS owner's manual.
If the display is acting up after power is restored
Many Samsung side-by-side models use a key combination to clear certain display or control states. If your panel is unresponsive or showing odd behavior after the power reset, try this common sequence:
- Press and hold Energy Saver and Lighting together for about 8 seconds.
- Release the buttons when the display changes or beeps.
What to expect after a reset
| What you see | What it means | What to do |
|---|---|---|
| Lights and display return | Control power restored | Set freezer and fridge temps and wait |
| Temps not cold yet | Normal after restart | Give it a few hours to stabilize |
| Ice production slow | Ice maker needs time | Wait 24 hours for full ice output |
Why it matters
A reset restores normal operation of the electronic control and display, which helps the refrigerator regulate temperatures correctly and run features like the ice maker and water dispenser reliably.
Last updated: February 2026
What is the capacity of the Samsung RS265TDRS?
The Samsung RS265TDRS side-by-side refrigerator has a total capacity of 25.5 cu. ft., split between 15.8 cu. ft. in the fresh food (refrigerator) section and 9.7 cu. ft. in the freezer. For the exact configuration details, use the RS265TDRS owner's manual.
Capacity breakdown
- Total capacity: 25.5 cu. ft.
- Refrigerator (fresh food): 15.8 cu. ft.
- Freezer: 9.7 cu. ft.
| Compartment | Capacity (cu. ft.) | What it’s used for |
|---|---|---|
| Fresh food section | 15.8 | Everyday refrigerated items, produce, beverages |
| Freezer section | 9.7 | Frozen foods, ice storage |
| Total | 25.5 | Combined usable storage |
Why capacity matters
Capacity helps you compare storage space across Samsung side-by-side models and set expectations for how much food fits comfortably. It also helps when planning shelf, bin, and drawer organization so airflow stays clear for consistent cooling.
Tips to get the most usable space
- Keep vents clear so cold air can circulate properly.
- Avoid overpacking shelves; tight packing can cause warm spots.
- Store bulky items on shelves, smaller items in bins to reduce clutter.
- Set temperatures to recommended ranges and allow 24 hours after changes.
Last updated: February 2026
What is the part number of the Samsung RS265TDRS water filter?
The Samsung RS265TDRS uses an internal, quarter-turn (90° twist) water filter located at the bottom right inside the fresh food section; the correct filter part number depends on the exact filter head and revision used in your unit. We confirm the right number by matching the filter label or the parts diagram in the RS265TDRS owner's manual.
How to identify the correct filter part number (fast)
Use these checks before ordering:
- Remove the filter and read the part number printed on the cartridge label
- Confirm it is a 90° twist, push-in style (not an inline filter behind the unit)
- Verify the filter location: bottom right inside the refrigerator compartment
- Match your full model ID from the rating label (inside the refrigerator) to the parts diagram
- If the label is worn, use the filter housing style and connections to match the diagram
What the manual confirms about replacement
The RS265TDRS manual shows the filter style and procedure:
- Turn the old filter 90° counterclockwise.
- Pull the filter straight out.
- Insert the new filter fully.
- Turn 90° clockwise to lock.
Filter indicator reset (after replacement)
| Display light status | What to do |
|---|---|
| Red | Replace the filter, then reset the indicator |
| Blue after reset | Reset completed successfully |
Reset step: press and hold the Water button for 3 seconds.
Why it matters
Using the correct cartridge keeps water flow steady at the dispenser and supports consistent ice maker fill. The manual also specifies the refrigerator needs 20 to 125 psi water pressure for proper ice maker operation.
Last updated: February 2026
