Kenmore 25370349412 refrigerator Parts

A refrigerator with the freezer on the bottom is called a bottom-freezer (bottom-mount) refrigerator. If it has two side-by-side fresh-food doors on top and a pull-out freezer drawer below, it is commonly called a French door bottom-freezer refrigerator, like the Kenmore 25370349412.

Common names you will see

• Bottom-freezer refrigerator (also called bottom-mount)
• French door refrigerator (fresh food on top with two doors, freezer drawer on bottom)
• Bottom-freezer drawer model (another way to describe the pull-out freezer)

Quick comparison

Style name	Top section	Bottom section	How it opens
Bottom-freezer (bottom-mount)	Refrigerator	Freezer	Usually 1 fridge door, freezer drawer
French door bottom-freezer	Refrigerator	Freezer	2 fridge doors, freezer drawer

Why it matters

Knowing the style helps you match the right Kenmore parts and setup steps, especially for installation details like leveling, door removal, and getting the refrigerator through doorways. For model-specific terminology and handling steps, use the installation guide.

Related parts customers often replace on bottom-freezer models

• Water filter (taste, odor, slow dispensing)
• Door gasket (warm spots, moisture, poor sealing)
• Ice maker (no ice, small cubes)
• Water inlet valve (no water to dispenser or ice maker)
• Evaporator fan components (warm refrigerator section, weak airflow)

Last updated: February 2026

For Kenmore refrigerator model 25370349412, the correct water filter is part #9999. Your owner's manual also confirms this filter type and explains where it installs (top right of the fresh food compartment) and when to replace it.

Quick ways to confirm you are buying the right filter

• Match your refrigerator model number exactly: 25370349412.
• Check the current filter already installed; reorder the same type.
• Use the manual’s “Changing the filter” section to confirm location and style.
• If your user interface shows a water filter status reminder, it is based on typical usage.
• Order the model-matched filter: refrigerator water filter 9999.

Replacement timing and key specs (what to expect)

In normal use, we replace the filter about every 6 months. The filter status reminder is typically based on about 200 gallons (757 liters) of water flow.

Item	Typical value for this model’s filter system
Replacement interval	Every 6 months
Rated capacity	200 gallons (757 liters)
Rated flow	0.50 gallons per minute
Operating temperature	33°F to 100°F
Water pressure range	30 to 100 psi

Why it matters

Using the correct filter for model 25370349412 helps protect water taste and ice quality, and it helps prevent leaks or poor water flow caused by a mismatched cartridge.

Last updated: February 2026

To reset the ice maker on your Kenmore 25370349412 bottom-mount refrigerator, use the ice maker On/Off control on the dispenser panel: press and hold the Ice Off icon for 3 seconds to turn it Off, then press and hold it again for 3 seconds to turn it back On. See the exact control-panel steps in the owner's manual.

Quick reset steps (control-panel reset)

• Make sure the refrigerator is connected to water and the shutoff valve is fully open.
• Press and hold Ice Off for 3 seconds to turn the ice maker Off (the LED above Ice Off lights).
• Wait 30 to 60 seconds.
• Press and hold Ice Off for 3 seconds to turn the ice maker On.
• If the bin is full, confirm the plastic signal arm can move freely (it stops ice automatically when the bin is full).

If you are resetting because ice is small, slow, or missing

Small cubes and slow production usually point to restricted water flow.

• Replace the water filter if it has been 6 months or longer (or sooner with poor water quality).
• Flush the dispenser after a filter change to purge air (spurting is normal at first).
• Check for a kinked water line behind the refrigerator.
• Confirm household water pressure is steady.

Common causes and what to check

Symptom	Most common cause	What we recommend
No ice after reset	Ice maker turned Off	Verify Ice Off LED is not lit
Small/hollow cubes	Clogged filter or low pressure	Replace Kenmore refrigerator water filter 9999
Loud chattering at rear	Ice maker trying to fill with no water	Turn ice maker Off until water supply is restored

Why it matters

A proper reset restores normal cycling, but consistent ice issues usually come from water supply, a clogged filter, or a bin/arm condition that tells the ice maker to stop.

Last updated: February 2026

A bad compressor in your Kenmore 25370349412 typically shows up as warm refrigerator and freezer temperatures even though the unit has power, along with repeated clicking (start attempt) or unusual loud humming. Before condemning the compressor, we rule out simple causes like controls set to “OFF/0” and airflow issues.

Quick signs the compressor is failing

• Refrigerator and freezer both warm, and cooling never recovers
• Repeated clicking every few minutes (overload or start device cycling)
• Compressor is very hot to the touch and shuts off quickly
• Loud buzzing, grinding, or rattling from the compressor area
• Fans may run, lights work, but there is little or no cooling

Checks to do first (fast, no tools)

These items commonly mimic a “bad compressor” and are worth checking right away.

• Confirm the freezer control is not set to “OFF” or “0” (the manual lists this as a reason the compressor will not run)
• Make sure the power cord is fully seated and the breaker is not tripped
• Verify the doors close and seal; poor sealing can make the refrigerator run too long and struggle to cool
• Make sure the toe grille area is not blocked so the unit can breathe
• Give it time if it just entered a defrost cycle; defrost can pause cooling for about 30 minutes

For model-specific operating and “before you call” checks, use the owner's manual.

What the symptoms usually mean

What you notice	Most likely cause	What we do next
Clicking, no steady run	Start device/overload issue or compressor locked	Test start components and compressor windings/amp draw
Runs but no cooling	Sealed system issue (refrigerant restriction/leak) or weak compressor	Check frost pattern, pressures (sealed-system service)
Runs constantly, temps high	Dirty condenser, airflow problem, door seal leak, or sealed system	Clean/inspect airflow and seals, then evaluate sealed system

When a compressor replacement is the right fix

If power and controls are correct, airflow is clear, and the compressor will not start or cannot maintain cooling, replacement becomes the practical repair. For this model, the compressor is available as refrigerator compressor 5304524549.

Why it matters

Misdiagnosing a compressor can lead to an expensive, unnecessary repair. A quick control, door-seal, and airflow check often identifies a simpler fix before moving to electrical testing or sealed-system work.

Last updated: February 2026

Your Kenmore refrigerator’s model number is printed on the rating label inside the fresh food (refrigerator) compartment. On Kenmore model 25370349412, it’s typically on an interior side wall, near the ceiling, or behind a crisper drawer; match that full number to the parts list and owner's manual for the most accurate identification.

Where to look for the model number label

Check these common spots first (use a flashlight and look for a white or silver sticker/plate):

• Inside the refrigerator section on the left or right side wall
• On the ceiling of the fresh food compartment
• Behind or under the crisper drawers (remove the drawer to see the liner wall)
• Along the door frame (visible when the door is open)
• Near the toe grille or lower front area (less common, but possible)

What to write down (and why)

Record the full model number and the serial number exactly as shown. This matters because Kenmore refrigerators can look similar across multiple series, but parts like a door gasket, ice maker, or control board can differ by revision.

Quick checklist

• Copy the model number exactly (all digits, no spaces)
• Copy the serial number exactly
• Note the color/finish (helps with door and trim parts)
• Take a clear photo of the label for reference

How the model number helps you find the right parts

Once you have the model number, you can match it to the correct diagrams and replacement parts for your exact refrigerator.

What you need	What it’s used for	Example on this model page
Model number	Selects the correct parts breakdown	25370349412
Water filter part number	Ensures correct fit and flow	Kenmore refrigerator water filter 9999
Ice maker assembly	Restores ice production	Refrigerator ice maker 243297613

Why it matters

Using the exact model number prevents ordering the wrong part and helps troubleshooting steps in the documentation match your control layout, door style, and bottom-mount freezer configuration.

Last updated: February 2026