Owner’s manual
Error Codes
What is Accela Chill?
Accela Chill is a quick-cooling feature name used on some Kenmore refrigerators; it refers to temporarily increasing cold-air circulation to cool the fresh-food section faster after loading warm groceries. For Kenmore model 10658912800, use the feature list and operating instructions in the 10658912800 owner's manual to confirm the exact name and how it is activated.
When a refrigerator has a “fast cool” mode like Accela Chill, it is designed to speed temperature recovery for a short period.
- Boosts airflow and cooling output temporarily
- Helps the refrigerator compartment pull down temperature faster
- Works best right after stocking the fridge or frequent door openings
- Turns off automatically after the timed cycle (typical behavior for this feature type)
Use quick-cool modes only when you need faster recovery.
- After a large grocery load
- After adding room-temperature leftovers
- During parties or heavy door use
- When you want faster stabilization after cleaning
| What you notice | Normal cause | What we recommend |
|---|---|---|
| Louder fan sound | Higher airflow | Keep vents clear and doors closed |
| Faster cooling | Temporary boost | Avoid overpacking shelves |
| More even temps | Increased circulation | Leave space around air outlets |
Quick-cool features reduce warm-up time after loading food, which helps maintain steadier storage temperatures and supports food freshness.
If you are also addressing weak cooling, slow ice production, or water dispensing issues, common related parts for this model include the refrigerator evaporator fan motor WP2315549 and the refrigerator water filter EDR3RXD1. You can order model-matched parts from the parts list for Kenmore 10658912800, or search by model on Sears PartsDirect.
Last updated: February 2026
What is the cubic foot of my Kenmore refrigerator model 10658912800?
The cubic-foot capacity for your Kenmore side-by-side refrigerator model 10658912800 is listed in the specifications section of the 10658912800 owner's manual. That spec is the correct total volume reference for this exact model and configuration.
In the manual PDF, we use these common locations to confirm total volume:
- Product specifications or features section near the front
- A model/features page that lists storage volume in cu. ft.
- The performance data sheet or accessories pages (sometimes referenced there)
- A rating label reference (the label itself is on the refrigerator, not in the PDF)
Cubic feet is the total interior volume (fresh food plus freezer). Usable space is always a bit less because shelves, bins, the ice maker, and air channels take up room.
Most Kenmore side-by-side units divide space roughly like this:
| Section | Typical share of total capacity | What affects it most |
|---|---|---|
| Fresh food (refrigerator) | 60% to 70% | Shelf and bin layout, damper airflow |
| Freezer | 30% to 40% | Ice maker and ice bin size |
Knowing the correct capacity helps set expectations for food storage and airflow. It also helps when comparing accessories and maintenance items such as a water filter and ice maker components.
If you are trying to keep storage and cooling consistent, these parts are commonly involved:
- Refrigerator ice maker 2198597 (ice production and bin fit)
- Refrigerator water filter cap (black) WP2260518B (proper sealing at the filter housing)
- Genuine Kenmore refrigerator water filter EDR3RXD1 (water and ice quality)
To order parts for model 10658912800, use the parts list for this model or search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the control panel on my Kenmore Elite refrigerator?
On Kenmore model 10658912800, the temperature control panel is located inside the fresh food (refrigerator) compartment, typically at the top area. Open the refrigerator door to access the controls that set refrigerator and freezer temperatures; see the 10658912800 owner's manual for the exact layout on your unit.
Most Kenmore side-by-side refrigerators like 10658912800 place the temperature controls in the refrigerator section rather than on the exterior door.
- Look along the upper interior ceiling area of the refrigerator compartment
- Check for a small control housing with temperature dials or sliders
- The freezer control is usually next to the refrigerator control
- Some versions also have a light associated with the control panel area
The manual describes that your model may use rotary controls or slide controls; the refrigerator control adjusts fresh food temperature and the freezer control adjusts freezer temperature.
- Higher numbers make the compartment colder
- Lower numbers make the compartment less cold
- Cooling stops if the refrigerator control is set to OFF
- After changing settings, allow about 24 hours for temperatures to stabilize
| Control | What it affects | Quick tip |
|---|---|---|
| Refrigerator control | Refrigerator compartment temperature | Avoid setting to OFF unless you want cooling stopped |
| Freezer control | Freezer compartment temperature | Small changes are best; wait a full day to judge results |
A common reason to access the area is replacing the control panel light; the manual notes you can reach behind the refrigerator control panel to remove and replace that bulb.
- Turn the control to OFF
- Unplug the refrigerator (disconnect power)
- Remove items or shelves that block your hands
- Use the correct hand tool (often a flat-blade screwdriver or nut driver)
- Reinstall the panel so it sits flush and does not pinch wiring
Finding the correct control panel location helps you set safe food temperatures, avoid accidentally turning cooling off, and access the control panel light area without damaging the liner or wiring.
Last updated: February 2026
Why is my Kenmore refrigerator not getting cold enough?
If your Kenmore 10658912800 side-by-side refrigerator is not cold enough, start with the basics: confirm the controls are not set to OFF, make sure air vents are not blocked, and allow a full 24 hours after any temperature change or new installation for temperatures to stabilize. See the 10658912800 owner's manual for the correct control settings and adjustment steps.
- Make sure the refrigerator control is not set to OFF (the unit will not cool in OFF).
- Check that air vents are not blocked by food packages in either compartment.
- Verify doors are closing and sealing fully; warm air leaks quickly reduce cooling.
- If the refrigerator was just installed or restarted, wait 24 hours for full cooling.
- Avoid frequent door openings and let hot leftovers cool before loading.
The manual notes that turning controls to a colder setting will not cool faster; it only changes the target temperature. Make one change, then wait at least 24 hours before changing again.
| Symptom | Most likely cause | What to adjust first |
|---|---|---|
| Refrigerator section too warm | Door opened often, warm room, large food load | Refrigerator control one setting colder |
| Freezer too warm or low ice | Heavy ice use, door opened often | Freezer control one setting colder |
| Refrigerator too cold | Setting too cold for conditions | Refrigerator control one setting warmer |
If controls, airflow, and door sealing look good, these are the most common next suspects:
- Dirty condenser area reducing heat removal (clean the condenser area and grille).
- Evaporator fan not running (no cold air circulation to the fresh food section); consider the refrigerator evaporator fan motor WP2315549 if the fan is confirmed failed.
- Defrost problem causing frost buildup on the evaporator (restricted airflow); common parts include the refrigerator defrost heater WP2323198 and the refrigerator bi-metal thermostat WPW10225581.
- Weak compressor start components (intermittent cooling); a failed refrigerator run capacitor WPW10662129 can contribute.
Running warm can spoil food and forces the compressor and fans to run longer. Correct control settings, clear airflow, and a clean condenser keep temperatures stable and reduce wear on key parts.
Last updated: February 2026
